Infrared spectroscopy bonds

Frohlich, H. Using Infrared Spectroscopy Measurements to Study Intermolecular Hydrogen Bonding, /. Chem. Educ. 1993, 70, A3-A6. 

Hydrogenation of polybutadiene converts both cis and trans isomers to the same linear structure and vinyl groups to ethyl branches. A polybutadiene sample of molecular weight 168,000 was found by infrared spectroscopy to contain double bonds consisting of 47.2% cis, 44.9% trans, and 7.9% vinyl. After hydrogenation, what is the average number of backbone carbon atoms between ethyl side chains ... 

Poly(vinyl acetate). The dielectric and mechanical spectra of hybrids produced by mixing a poly(vinyl acetate)—THE solution with TEOS, followed by the addition of HCl have been investigated (45). Mixtures were made which were beheved to be 0, 5, 10, 15, and 20 wt % Si02, respectively. These composites were transparent and Eourier transform infrared spectroscopy (ftir) revealed hydrogen bonding between the siUcate network and carbonyl units of the poly(vinyl acetate) (PVAc). No shift in the T of the composites from that of the pure PVAc was observed. Similarly, the activation... 

The ease of sample handling makes Raman spectroscopy increasingly preferred. Like infrared spectroscopy, Raman scattering can be used to identify functional groups commonly found in polymers, including aromaticity, double bonds, and C bond H stretches. More commonly, the Raman spectmm is used to characterize the degree of crystallinity or the orientation of the polymer chains in such stmctures as tubes, fibers (qv), sheets, powders, and films... 

Infrared spectroscopy has broad appHcations for sensitive molecular speciation. Infrared frequencies depend on the masses of the atoms iavolved ia the various vibrational motions, and on the force constants and geometry of the bonds connecting them band shapes are determined by the rotational stmcture and hence by the molecular symmetry and moments of iaertia. The rovibrational spectmm of a gas thus provides direct molecular stmctural information, resulting ia very high specificity. The vibrational spectmm of any molecule is unique, except for those of optical isomers. Every molecule, except homonuclear diatomics such as O2, N2, and the halogens, has at least one vibrational absorption ia the iafrared. Several texts treat iafrared iastmmentation and techniques (22,36—38) and thek appHcations (39—42). 

Specific optical rotation values, [a], for starch pastes range from 180 to 220° (5), but for pure amylose and amylopectin fractions [a] is 200°. The stmcture of amylose has been estabUshed by use of x-ray diffraction and infrared spectroscopy (23). The latter analysis shows that the proposed stmcture (23) is consistent with the proposed ground-state conformation of the monomer D-glucopyranosyl units. Intramolecular bonding in amylose has also been investigated with nuclear magnetic resonance (nmr) spectroscopy (24). 

We discuss the rotational dynamics of water molecules in terms of the time correlation functions, Ciit) = (P [cos 0 (it)]) (/ = 1, 2), where Pi is the /th Legendre polynomial, cos 0 (it) = U (0) U (it), u [, Is a unit vector along the water dipole (HOH bisector), and U2 is a unit vector along an OH bond. Infrared spectroscopy probes Ci(it), and deuterium NMR probes According to the Debye model (Brownian rotational motion), both... 

In this chapter, three methods for measuring the frequencies of the vibrations of chemical bonds between atoms in solids are discussed. Two of them, Fourier Transform Infrared Spectroscopy, FTIR, and Raman Spectroscopy, use infrared (IR) radiation as the probe. The third, High-Resolution Electron Enetgy-Loss Spectroscopy, HREELS, uses electron impact. The fourth technique. Nuclear Magnetic Resonance, NMR, is physically unrelated to the other three, involving transitions between different spin states of the atomic nucleus instead of bond vibrational states, but is included here because it provides somewhat similar information on the local bonding arrangement around an atom. 

The principles of infrared spectroscopy can be exploited to extract information on the chemical bonding of an extremely wide variety of materials. The greatest strength of the technique is as a nondestructive, bulk probe of glassy and amor-... 

Surface analysis has made enormous contributions to the field of adhesion science. It enabled investigators to probe fundamental aspects of adhesion such as the composition of anodic oxides on metals, the surface composition of polymers that have been pretreated by etching, the nature of reactions occurring at the interface between a primer and a substrate or between a primer and an adhesive, and the orientation of molecules adsorbed onto substrates. Surface analysis has also enabled adhesion scientists to determine the mechanisms responsible for failure of adhesive bonds, especially after exposure to aggressive environments. The objective of this chapter is to review the principals of surface analysis techniques including attenuated total reflection (ATR) and reflection-absorption (RAIR) infrared spectroscopy. X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and secondary ion mass spectrometry (SIMS) and to present examples of the application of each technique to important problems in adhesion science. 

Infrared (IR) spectroscopy (Section 13.20) Analytical technique based on energy absorbed by a molecule as it vibrates by stretching and bending bonds. Infrared spectroscopy is useful for analyzing the functional groups in a molecule. 

The structure of the protonated enamines has been investigated by infrared spectroscopy. On protonation there is a characteristic shift of the band in the double-bond stretching region to higher frequencies by 20 to 50 cm with an increased intensity of absorption (6,13,14a). Protonated enamines also show absorption in the ultraviolet at 220-225 m/x due to the iminium structure (14b). This confirms structure 5 for these protonated enamines, because a compound having structure 4 would be expected to have only end absorption as the electrons on nitrogen would not be available for interaction with the n electrons of the double bond. 

Deprotonation of H2O2 yields OOH , and hydroperoxides of the alkali metals are known in solution. Liquid ammonia can also effect deprotonation and NH4OOH is a white solid, mp 25° infrared spectroscopy shows the presence of NH4+ and OOH ions in the solid phase but the melt appears to contain only the H-bonded species NH3 and H202. " Double deprotonation yields the peroxide ion 02 , and this is a standard route to transition metal peroxides. 

The formation of a sulfoxide group is confirmed by infrared spectroscopy absorption bonds typical of a sulfonic group can be observed in 1120 -i- 1160 and 1310... 

Pseudo-/ -DL-gi Zopyranose triacetate (36) was prepared by hydroxyla-tion of the enetriol triacetate (32) and converted to the corresponding pentol and pentaacetate. The intermediate 32 was obtained by Diels-Alder reaction (200°C., two days) of rans/ rans-l,4-diacetoxy-l,3-buta-diene with allyl acetate. The double bond was surprisingly inert to the usual additive reagents and not detectable by infrared spectroscopy because of near-symmetry, but it did react with tert-butyl hydroxperoxide to give 36 in about 30% yield (27). 

Infrared radiation, electromagnetic spectrum and, 419, 422 energy of. 422 frequencies of, 422 wavelengths of, 422 Infrared spectroscopy, 422-431 acid anhydrides, 822-823 acid chlorides, 822-823 alcohols. 428, 632-633 aldehydes, 428. 730-731 alkanes, 426-427 alkenes, 427 alkynes, 427 amides. 822-823 amines, 428, 952 ammonium salts, 952-953 aromatic compound, 427-428, 534 bond stretching in, 422... 

The participation of siloxane groups in the reaction increases with the temperature of dehydration of Si02 and quantity of organometallic compound introduced in the reaction. According to the data of infrared spectroscopy (139), the allyl ligands formed in the surface organometallic complexes of Ni and Cr keep the 7r-allyl character of the metal-ligand bond. 

Much earlier information on the structure of diazonium ions than that derived from X-ray analyses (but still useful today) was obtained by infrared spectroscopy. The pioneers in the application of this technique to diazonium and diazo compounds were Le Fevre and his school, who provided the first IR evidence for the triple bonds by identifying the characteristic stretching vibration band at 2260 cm-1 (Aroney et al., 1955 see also Whetsel et al., 1956). Its frequency lies between the Raman frequency of dinitrogen (2330 cm-1, Schrotter, 1970) and the stretching vibration frequency of the C = N group in benzonitrile (2255 cm-1, Aroney et al., 1955). In substituted benzenediazonium salts the frequency of the NN stretching vibration follows Hammett op relationships. Electron donor substituents reduce the frequency, whereas acceptor substituents increase it. The 4-dimethylamino group, for example, shifts it by 103 cm-1 to 2177 cm-1 (Nuttall et al., 1961). This result supports the hypothesis that... 

---