Thermogravimetric analysis hyphenated techniques

Mixtures can be identified with the help of computer software that subtracts the spectra of pure compounds from that of the sample. For complex mixtures, fractionation may be needed as part of the analysis. Commercial instmments are available that combine ftir, as a detector, with a separation technique such as gas chromatography (gc), high performance Hquid chromatography (hplc), or supercritical fluid chromatography (96,97). Instmments such as gc/ftir are often termed hyphenated instmments (98). Pyrolyzer (99) and thermogravimetric analysis (tga) instmmentation can also be combined with ftir for monitoring pyrolysis and oxidation processes (100) (see Analytical methods, hyphenated instruments). 

Characterisation of Elastomers Using (Multi) Hyphenated Thermogravimetric Analysis Techniques... 

Figure 1.1 (Multi) hyphenated thermogravimetric analysis techniques. The figures...

The thermal characterisation of elastomers has recently been reviewed by Sircar [28] from which it appears that DSC followed by TG/DTG are the most popular thermal analysis techniques for elastomer applications. The TG/differential thermal gravimetry (DTG) method remains the method of choice for compositional analysis of uncured and cured elastomer compounds. Sircar s comprehensive review [28] was based on single thermal methods (TG, DSC, differential thermal analysis (DTA), thermomechanical analysis (TMA), DMA) and excluded combined (TG-DSC, TG-DTA) and simultaneous (TG-fourier transform infrared (TG-FTIR), TG-mass spectroscopy (TG-MS)) techniques. In this chapter the emphasis is on those multiple and hyphenated thermogravimetric analysis techniques which have had an impact on the characterisation of elastomers. The review is based mainly on Chemical Abstracts records corresponding to the keywords elastomers, thermogravimetry, differential scanning calorimetry, differential thermal analysis, infrared and mass spectrometry over the period 1979-1999. Table 1.1 contains the references to the various combined techniques. 

Note A hyphen is used to separate the abbreviations of the techniques for example, simultaneous measurement of mass and heat flow rate (thermogravimetric analysis and differential scaiming calorimetry) would be TGA-DSC. 

D.J. Johnston, P.J. Stout, S.L. HUl, and K. Krishnan, Differential scanning calorimetry—fourier transform IR spectroscopy and thermogravimetric analysis—fourier transform IR spectroscopy to differentiate between very similar polymer materials, in T. Provder, M.W. Urban and H.G. Barth, eds.. Hyphenated Techniques in Polymer Characterization Thermal and Spectroscopic Methods, American Chemical Society Symposium Series, pp. 149-161,1994. 

Thermal analysis is a group of techniques in which a physical property of a substance is measured as a function of temperature when the sample is subjected to a controlled temperature program. Single techniques, such as thermogravimetry (TG), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), dielectric thermal analysis, etc., provide important information on the thermal behaviour of materials. However, for polymer characterisation, for instance in case of degradation, further analysis is required, particularly because all of the techniques listed above mainly describe materials only from a physical point of view. A hyphenated thermal analyser is a powerful tool to yield the much-needed additional chemical information. In this paper we will concentrate on simultaneous thermogravimetric techniques. 

Table 1.5 Comparison of hyphenated thermogravimetric techniques for elastomer analysis ...

---