Hydrogen swelling

Tinplate that meets the rigid specifications imposed by these controls is sometimes supplied as special quality material and undoubtedly can give improved shelf-life, particularly with citrus fruits. The A.T.C. value has probably more effect on shelf-life determined by hydrogen swell than any other factor. 

Fig. 1. SAE J200 Classification system for ASTM No. 3 oil where in volume swell nr = no requirement. EPDM is ethylene—propylene—diene monomer HR, butyl mbber SBR, styrene—butadiene mbber NR, natural mbber VMQ, methyl vinyl siUcone CR, chloroprene FKM, fluoroelastomer FVMQ, fluorovinyl methyl siUcone ACM, acryUc elastomers HSN, hydrogenated nitrile ECO, epichlorohydrin and NBR, nitrile mbber.

Fusion Reactors. The development of fusion reactors requires a material exhibiting high temperature mechanical strength, resistance to radiation-induced swelling and embrittlement, and compatibUity with hydrogen, lithium and various coolants. One aUoy system that shows promise in this appHcation, as weU as for steam-turbine blades and other appHcations in nonoxidizing atmospheres, is based on the composition (Fe,Co,Ni)2V (30). 

Amines can also swell the polymer, lea ding to very rapid reactions. Pyridine, for example, would be a fairly good solvent for a VDC copolymer if it did not attack the polymer chemically. However, when pyridine is part of a solvent mixture that does not dissolve the polymer, pyridine does not penetrate into the polymer phase (108). Studies of single crystals indicate that pyridine removes hydrogen chloride only from the surface. Kinetic studies and product characterizations suggest that the reaction of two units in each chain-fold can easily take place further reaction is greatiy retarded either by the inabiUty of pyridine to diffuse into the crystal or by steric factors. 

As the hydrogen ions replace alkali (R) ions a surface film forms which has properties different from the massive glass. This film swells, acting as a barrier to further diffusion of ions into, and out of, the surface, inhibiting further attack. If this layer dries out, the thin film gives characteristic irridescent interference colours. 

---