Hydrogen fluoride treating

Analytical Methods. Fluorite is readily identified by its crystal shape, usually simple cubes or interpenetrating twins, by its prominent octahedral cleavage, its relative softness, and the production of hydrogen fluoride when treated with sulfuric acid, evidenced by etching of glass. The presence of fluorite in ore specimens, or when associated with other fluorine-containing minerals, may be deterrnined by x-ray diffraction. 

Experimentation with test animals and laboratory and plant experience indicate that the fluorophosphoric acids are less toxic and dangerous than hydrogen fluoride (58). However, they contain, or can hydrolyze to, hydrofluoric acid and must be treated with the same care as hydrofluoric acid. Rubber gloves and face shields are essential for all work with these acids, and full mbber dress is necessary for handling larger quantities. The fumes from these acids contain HF. 

Preparation. Silver fluoride can be prepared by dissolving Ag20 or Ag2C02 iu anhydrous hydrogen fluoride or aqueous hydrofluoric acid, evaporating to dryness, and then treating with methanol or ether. 

The spent hydrogen fluoride layer, which contains water and sodium bifluoride, from this process is treated with sulfur trioxide or 65% oleum, and hydrogen fluoride is distilled for recycle to the next batch (176,177). 

Silver Fluoride. Silver fluoride, AgF, is prepared by treating a basic silver salt such as silver oxide or silver carbonate, with hydrogen fluoride. Silver fluoride can exist as the anhydrous salt, a dihydrate [72214-21-2] (<42° C), and a tetrahydrate [22424-42-6] (<18° C). The anhydrous salt is colorless, but the dihydrate and tetrahydrate are yellow. Ultraviolet light or electrolysis decomposes silver fluoride to silver subfluoride [1302-01 -8] Ag2p, and fluorine. 

Qua.driva.Ient, Zirconium tetrafluoride is prepared by fluorination of zirconium metal, but this is hampered by the low volatility of the tetrafluoride which coats the surface of the metal. An effective method is the halogen exchange between flowing hydrogen fluoride gas and zirconium tetrachloride at 300°C. Large volumes are produced by the addition of concentrated hydrofluoric acid to a concentrated nitric acid solution of zirconium zirconium tetrafluoride monohydrate [14956-11-3] precipitates (69). The recovered crystals ate dried and treated with hydrogen fluoride gas at 450°C in a fluid-bed reactor. The thermal dissociation of fluorozirconates also yields zirconium tetrafluoride. 

When treated with aluminum bromide at 100°C, carbon tetrachloride is converted to carbon tetrabromide [558-13-4], reaction with calcium iodide, Cal2, at 75°C gives carbon tetraiodide [507-25-5]. With concentrated hydroiodic acid at 130°C, iodoform [75-47-8], CHI, is produced. Carbon tetrachloride is unaffected by gaseous fluorine at ordinary temperatures. Replacement of its chlorine by fluorine is brought about by reaction with hydrogen fluoride at a... 

White phosphorus. This element burns in air and can produce severe thermal and chemical burns. It may reignite on drying. After washing, rapid but brief treatment with copper sulphate (to avoid systemic absorption and copper poisoning) is used to convert the phosphorus to copper phosphide which is then removed Hydrogen fluoride. This can form painful but delayed necrosis. Treat with calcium gluconate locally and monitoring of serum calcium levels, with administration of calcium where necessary... 

Cyclopropyl methanols when treated with a combination of hydrogen fluoride, pyridine, potassium hydrogen fluoride, and diisopropylamine undergo fluonnation and rearrangement to give excellent yields of homoallylic fluorides Chlorobenzene substituted cyclopropyl methanols at low temperatures leads to ring expansion to give... 

Fluoroaromatics are now produced m 75-90% yields on an industrial scale by this method The nonorganic layer containing water, hydrogen fluoride, and sodium bifluoride is treated with sulfur trioxide, and anhydrous hydrogen fluoride is recycled by distillation [54 (equation 13)... 

Similarly, 2-methylheplafluoronaphthalene when treated with fuming nitric acid in hydrogen fluoride furnishes l-nitro-3-methyl-l,2,4,4,5,6,7,8-octafluoro-... 

Rearrangement of fluorine with concomitant ring opening takes place in fluorinated epoxides Hexafluoroacetone can be prepared easily from perfluo-ropropylene oxide by isomerization with a fluorinated catalyst like alumina pre treated with hydrogen fluoride [26, 27, 28] In ring-opening reactions of epoxides, the distribution of products, ketone versus acyl fluoride, depends on the catalyst [29] (equation 7) When cesium, potassium, or silver fluoride are used as catalysts, dimenc products also are formed [29]... 

C04-0109. Hydrogen fluoride is produced industrially by the action of sulfuric acid on Cap2. If 365 kg of CaF2 is treated with excess sulfiaric acid and 155 kg of HF is produced, what is the percent yield and how much CaF2 remains unreacted, assuming no other fluorine-containing product forms ... 

C21-0082. Calcium dihydrogen phosphate is a common phosphoras fertilizer that is made by treating fluoroapatite with phosphoric acid. Hydrogen fluoride is a by-product of the synthesis. Write a balanced equation for the production of this fertilizer and calculate the mass percent of phosphorus in the fertilizer. 

The classical method for introducing the fluorine atom to the anomeric center is to treat per-O-acetylated sugars with hydrogen fluoride [15], using which a-glycosyl fluorides can be prepared stereoselectively, however, the procedure is incompatible with any acid-sensitive functionalities present in the molecule. In addition, hydrogen fluoride is highly corrosive, which makes this method unattractive to many... 

Before fluorination, the dielectric constant ofpoly(bisbenzocyclobutene) was 2.8, and this value was reduced to 2.1 after plasma treatment. No data were reported in the paper on characterization of structure or properties, except for the dielectric constant of the modified poly(bisbenzocyclobutene). The authors did report that the thermal stability offluorinatedpoly(vinylidenefluoride) was inferior to the original poly(vinylidenefluoride) when treated in a similar way. One of the probable reasons for the low thermal stability is that the NF3 plasma degraded the polymer. According to their results, the thickness of fluorinated poly(bisbenzo-cyclobutene) was reduced by 30%. The same phenomenon was observed for other hydrocarbon polymers subjected to the NF3 plasma process. A remaining question is whether plasma treatment can modify more than a thin surface layer of the cured polymer Additionally, one of the side products generated was hydrogen fluoride, which is a serious drawback to this approach. 

The formation of silicon-flvxyride bonds on the surface of silica after treatment with hydrogen fluoride was never proven directly. However, there is a pronounced change in the adsorption and wetting properties. The silica becomes hydrophobic as was mentioned in a patent to Kimberlin (279a). Neimark and collaborators (279b) found a type V isotherm in the methanol adsorption on silica gel which had been treated with a solution of SiF in absolute alcohol. Wilska (280) obtained a water-repellent silica when solutions of HaSiPg were precipitated with ammonia. The Si—F bond is hydrolyzed only slowly. A considerable fluorine content of 7-10% F was reported in an older patent (281) for a silica that had been prepared by hydrolysis of SiF. ... 

Polyolefin bottles of suitable size are commercially available. One inconvenience occasionally observed with bottles which have not previously been in contact with hydrogen fluoride is the formation of a slight pink color in the reaction mixture, possibly due to the plasticizers. This coloration does not affect either the yields or the purity of the product, however, because the color is generally eliminated after the product is washed and treated with sodium fluoride. 

A convenient method for the preparation of nitronium tetrafluoroborate involves treating a mixture of absolute nitric acid or an alkyl nitrate " with anhydrous hydrogen fluoride and an excess of boron trifluoride. Pure nitronium triflate can be synthesized by treating triflic anhydride or triflic acid with dinitrogen pentoxide in an inert solvent. Other methods for nitronium salt synthesis are discussed by Olah. ... 

---