Hydrocarbons compositional changes during

Rather than quantifying a complex total petroleum hydrocarbon mixture as a single number, petroleum hydrocarbon fraction methods break the mixture into discrete hydrocarbon fractions, thus providing data that can be used in a risk assessment and in characterizing product type and compositional changes such as may occur during weathering (oxidation). The fractionation methods can be used to measure both volatile and extractable hydrocarbons. 

Siciliano SD, JJ Germida, K Banks, CW Greer (2003) Changes in microbial community composition and function during a polyaromatic hydrocarbon phytoremediation field trial. Appl Environ Microbiol 69 ... 

Changes in the chemical composition of the kerosene during volatilization also affect the physical properties of this petroleum product. Table 16.8 summarizes the effect of volatilization on kerosene viscosity, surface tension, and density when 20%, 40%, and 60% of the initial amount has been removed by the partial transfer of light hydrocarbon fractions to the atmosphere. Only the liquid viscosity is affected, with volatilization having a negligible effect on the density and surface tension of the kerosene. 

During maintenance work, simultaneous release of chlorine and acetylene from two plants into a common vent line leading to a flare caused an explosion in the line [10]. The violent interaction of liquid chlorine injected into ethane at 80°C/10 bar becomes very violent if ethylene is also present [11]. The relationship between critical pressure and composition for self-ignition of chlorine—propane mixtures at 300°C was studied, and the tendency is minimal for 60 40 mixtures. Combustion is explosive under some conditions [12]. Precautions to prevent explosions during chlorination of solid paraffin hydrocarbons are detailed [13]. In the continuous chlorination of polyisobutene at below 100°C in absence of air, changes in conditions (increase in chlorine flow, decrease in polymer feed) leading to over-chlorination caused an exotherm to 130°C and ignition [14],... 

---