Hollow fiber membranes, commercially available types

Current commercial inorganic membranes come in a limited number of shapes disk, tube and monolithic honeycomb. Compared to other shapes such as spiral-wound and hollow-fiber that are available to commercial organic membranes, these types of membrane elements have lower packing densities and, therefore, lower throughput per unit volume of membrane element or system. 

In Situ Filter Membranes In situ membranes are being fitted into incinerator flue-gas stacks in an attempt to reduce hydrocarbon emissions. Two types of commercially available gas separation membranes are being studied (1) flat cellulose acetate sheets and (2) hollow-tube fiber modules made of polyamides. 

The most important technique for perfusion culture methods is to separate the concentrated cells and conditioned medium from the suspended culture broth. As noted above, the separation methods chiefly used are filtration with tubular and flat membranes as well as ceramic macroporous filters. These membrane reactors can be employed for both anchorage-dependent and suspension growing cells. Static maintenance type systems are commercially available for disposable reactors, and small size unit reactors from 80 ml to 1 liter are used for continuous production of monoclonal antibodies with hybridoma cells. The maintainable cell densities are about 10 -10 cells/ ml which is essentially mouse ascites level. However, in these systems, the cell numbers cannot be counted directly because the cells adhere to membranes or hollow fibers. Therefore, the measurement of cell density must use indirect methods. Such indirect methods include the assaying of the quantities of glucose consumption and the accumulation of lactate. The parameters of scale-up have not yet been established for these static methods. 

---