Hills, Inc

F. Rodrigue2, T rinciples of I oljmer Systems McGraw-Hill, Inc., New York, 1970, Chapt. 5. 

FIG. 16-63 Asahi countercurrent ion-exchange process. [Gilwood, Chem. Eng., 74(26), 86 (1967) copyiight 1967 hy McGraw-Hill, Inc., New York. Exceipted with special peimission of McGi aw-Hill.]... 

FIG. 18-42 Typical application and power for doiihle-arm kneaders. To convert horsepower per gallon to kilowatts per ciihic meter, multiply hy 197.3. [Farket] Chem. Eng. 72(18) 125 (1965) excerpted hy special pomission of the copytight owner, McGraw-Hill, Inc.]... 

FIG. 18-76 Bollman-type extractor. (McCahe, Smith, and Haniott, Unit Operations of Chemical Engineering, 5th ed., p. 616. Copyiight 1993 hy McGraw-Hill, Inc., New York. Used with permission of McGraw-Hill Book Company.)... 

FIG. 18-122 Schematic of a rotary-drum vacuum filter with scraper discharge, showing operating zones. (Schweitzer, Handbook of Separation Techniques for Chemical Engineers, p. 4-38. Copqtight 1979 hq McGraw-Hill, Inc. Used with permission of McGraw-Hill Inc.)... 

Levin, M. A. and M. A. Gealt, Biotreatment oflndustiial and Hazardous Waste, McGraw-Hill Inc., 1993. 

Figure 1.4 Schematic of all components of a complete air-conditioning system. [Fig. 37.8, The Nalco Water Handbook, 1st ed. (1979), reprinted with permission from McGraw-Hill, Inc. ]...

Figure 1.7 Simple detail of shell-and-tube heat exchanger. The water box may be designed for as many as eight passes, and a variety of configurations of shell-side baffles may be used to improve heat transfer, (a) Several water box arrangements for tube-side cooling, (b) Assembly of simple two-pass exchanger with U-tubes. [Fig. 38.2, The Nalco Water Handbook, 1st ed. (1979), reprinted with permission from McGraw-Hill, Inc.)...

Figure 5.4 EfTect of temperature on corrosion of iron in water containing dissolved oxygen. (Courtesy of McGraw-Hill Inc., Corrosion, Causes and Prevention, by F. Speller, p. 168, McGraw-Hill, 1951)...

Figure 11.10 Effect of pH of distilled water on erosion-corrosion of carbon steel at 122°F (50°C) (velocity, 39 ft/s, 12 m/s). (SOURCE M. G. Fontana and N. D. Greene, Corrosion Engineering, 2d ed., 1978, p. 75. Reprinted with permission from McGraw-Hill, Inc.)...

This book follows the format used in The Nalco Guide to Boiler Failure Analysis, also authored by Robert D. Port and Harvey M. Herro, copyright 1991 by McGraw-Hill, Inc. Each chapter is divided into eight sections, giving specific information on damage ... 

Figure 1. Packed column internals. (Reprinted by special permission from Chemical Engineering, March 5, 1984, copyright 1984 by McGraw-Hill, Inc.)...

R. L. Barton ( Sizing Liquid-Liquid Phase Separators Empirically, Chemical Engineering, July 8, 1974, Copyright (1974) McGraw-Hill, Inc., used with permission) provides the following quick method for sizing liquid-liquid phase sepai ators empirically. 

Perry, R. H., and Chilton, C. H., Chemical Engineers Handbook. New York McGraw-Hill, Inc, 1973. 

---