Halides palladium synthesis

Examples of the formylation of aryl halides with synthesis gas catalyzed by palladium complexes are summarized in Equation 19.90. These reactions relied upon the development of ligands with particular steric and electronic properties. The dia-damantyl-n-butyl phosphine shown in the equation, in combination with palladium acetate, leads to the formation of aromatic aldehydes in high yields from electron-rich and electron-poor aryl bromides. Reactions of nitroarenes and 2-bromopyridine provided the aldehydes in low yield, but other examples occurred in satisfactor) yield with only 0.1-0.75 mol % catalyst. The identity of the base is important in this process, and TMEDA was the most effective base. The mechanism of this process was not proposed in the initial work, but is likely to occur by oxidative addition of the aryl halide, insertion of the carbon monoxide into the palladium-aryl bond, and a combination of hydrogenolysis of the acyl intermediate and elimination of hydrogen halide to regenerate palladium(O). The base would then be involved in the hydrogenol5 sis and consumption of hydrogen halide. 

Seven procedures descnbe preparation of important synthesis intermediates A two-step procedure gives 2-(HYDROXYMETHYL)ALLYLTRIMETH-YLSILANE, a versatile bifunctional reagent As the acetate, it can be converted to a tnmethylenemethane-palladium complex (in situ) which undergoes [3 -(- 2] annulation reactions with electron-deficient alkenes A preparation of halide-free METHYLLITHIUM is included because the presence of lithium halide in the reagent sometimes complicates the analysis and use of methyllithium Commercial samples invariably contain a full molar equivalent of bromide or iodide AZLLENE IS a fundamental compound in organic chemistry, the preparation... 

Traditionally, the synthesis of symmetrical biaryls was routinely accomplished using the Ullmann reaction. Recently, palladium-catalyzed homocoupling of aryl halides has also been demonstrated to rival the utility of the Ullmann coupling. As illustrated in Scheme 21, using Pd(OAc)2 as the... 

The original Sonogashira reaction uses copper(l) iodide as a co-catalyst, which converts the alkyne in situ into a copper acetylide. In a subsequent transmeta-lation reaction, the copper is replaced by the palladium complex. The reaction mechanism, with respect to the catalytic cycle, largely corresponds to the Heck reaction.Besides the usual aryl and vinyl halides, i.e. bromides and iodides, trifluoromethanesulfonates (triflates) may be employed. The Sonogashira reaction is well-suited for the synthesis of unsymmetrical bis-2xy ethynes, e.g. 23, which can be prepared as outlined in the following scheme, in a one-pot reaction by applying the so-called sila-Sonogashira reaction ... 

Hardacre et al. have developed a procedure for the synthesis of deuterated imidazoles and imidazolium salts [65]. The procedure involves the platinum- or palladium-catalyzed deuterium exchange of 1-methyl-d -imidazole with D2O to give 1-methylimidazole-d , followed by treatment with a deuterated alkyl halide. 

A better method for preparing primary amines is to use the azide synthesis, in which azjde ion, N3, is used for SN2 reaction with a primary or secondary alkyl halide to give an alkyl azide, RN3. Because alkyl azides are not nucleophilic, overalkylation can t occur. Subsequent reduction of the alkyl azide, either by catalytic hydrogenation over a palladium catalyst or by reaction with LiAlK4. then leads to the desired primary amine. Although the method works well, low-molecular-weight alkyl azides are explosive and must be handled carefully. 

At about die same time, die application of the Suzuki coupling, the crosscoupling of boronic acids widi aryl-alkenyl halides in die presence of a base and a catalytic amount of palladium catalyst (Scheme 9.12),16 for step-growth polymerization also appeared. Schliiter et al. reported die synthesis of soluble poly(para-phenylene)s by using the Suzuki coupling condition in 1989 (Scheme 9.13).17 Because aryl-alkenyl boronic acids are readily available and moisture stable, the Suzuki coupling became one of die most commonly used mediods for die synthesis of a variety of polymers.18... 

Thiele and co-workers 389) prepared the only known palladium chalcogenide halides, PdTel and Pd Sels, by hydrothermal synthesis in HI (see Section II,D,2) at 300°C, starting with the elements. Crystalline PdzSelj is better obtained by reaction of Pdl2 with Se and an excess of iodine in a closed ampoule at 250°C (reaction time, 2 days). 

For reviews of organotin hydrides, see Neumann, W.R Synthesis, 1987,665 Kuivila, H.G. Synthesis, 1970,499, Acc. Chem. Res., 1968,1,299. Tributyltin hydride also reduces vinyl halides in the prescence of a palladium catalyst. See Uenishi, J. Kawahama, R. Shiga, Y Yonemitsu, O. Tsuji, J. Tetrahedron Lett., 1996, 37, 6759. 

The Suzuki-Miyaura synthesis is one of the most commonly used methods for the formation of carbon-to-carbon bonds [7]. As a palladium catalyst typically tetrakis(triphenylphosphine)palladium(0) has been used, giving yields of44—78%. Recently, Suzuki coupling between aryl halides and phenylboronic acid with efficient catalysis by palladacycles was reported to give yields of 83%. 

The synthesis of 1-alkenylboronic acids from l-alkenylmagnesiums or -lithiums suffers from difficulty in retaining the stereochemistry of 1-aikenyl halides, but the palladium-catalyzed coupling reaction of diboron 82 with 1-aikenyl halides or tri-flates directly provides 1-alkenylboronic esters (Scheme 1-43) [157, 158]. Although the reaction conditions applied to the aryl coupling resulted in the formation of an... 

In recent years, cross-coupling methodology has emerged as a viable tool for enamide synthesis, and, indeed, there are a number of published protocols which employ palladium- or copper-catalyzed stereospecific amidations of vinyl halides [17]. For example, Buchwald and coworkers had recently shown that a copper-catalyzed cross-coupling of vinyl bromides or iodides proceeded with retention of stereochemistry (Scheme 9.16), though the only example using a tetrasubstituted vinyl halide, 23, lacked the need for any stereochemical control in the halide portion [18]. Based on this it seemed feasible that the desired enamide 22 could potentially be assembled via a comparable coupling between amide 24 and a stere-odefined vinyl halide such as 25. 

Unfortunately, it quickly became apparent that a shortfall in this proposal was an inability to prepare the desired vinyl halide 25 in a straightforward and selective manner [19]. In contrast, we reasoned that the selective formation of an enol sulfonate, such as the enol triflate 26a, could be controlled by judicious tuning of enolization conditions starting from the corresponding ketone, and that such an enol sulfonate would possibly be a substrate for a palladium-mediated coupling (Scheme 9.17). In this way a common intermediate from the previously defined synthesis, that is, the racemic ketone rac-13 or its cyano equivalent rac-5 could be used to generate the required enamide. 

The coupling of terminal alkynes with organic halides, known as the Castro-Stephens-Sonogashira reaction, has wide applications in synthesis. The most widely used method is the Sonogashira coupling, using a combination of palladium and copper as the catalyst.13 Recently,... 

Later, a nickel-catalyzed cascade conversion of propargyl halides and propargyl alcohol into a pyrone in water was reported. The reaction involved a carbonylation by CO and a cyanation by KCN (Eq. 4.55).96 Recently, Gabriele et al. explored a facile synthesis of maleic acids by palladium catalyzed-oxidative carbonylation of terminal alkynes in aqueous DME (1,2-dimethoxyethane) (Eq. 4.56).97... 

Monoanions derived from nitroalkanes are more prone to alkylate on oxygen rather than on carbon in reactions with alkyl halides, as discussed in Section 5.1. Methods to circumvent O-alkylation of nitro compounds are presented in Sections 5.1 and 5.4, in which alkylation of the a.a-dianions of primary nitro compounds and radial reactions are described. Palladium-catalyzed alkylation of nitro compounds offers another useful method for C-alkylation of nitro compounds. Tsuj i and Trost have developed the carbon-carbon bond forming reactions using 7t-allyl Pd complexes. Various nucleophiles such as the anions derived from diethyl malonate or ethyl acetoacetate are employed for this transformation, as shown in Scheme 5.7. This process is now one of the most important tools for synthesis of complex compounds.6811-1 Nitro compounds can participate in palladium-catalyzed alkylation, both as alkylating agents (see Section 7.1.2) and nucleophiles. This section summarizes the C-alkylation of nitro compounds using transition metals. 

Hydroxycarbonylation and alkoxycarbonylation of alkenes catalyzed by metal catalyst have been studied for the synthesis of acids, esters, and related derivatives. Palladium systems in particular have been popular and their use in hydroxycarbonylation and alkoxycarbonylation reactions has been reviewed.625,626 The catalysts were mainly designed for the carbonylation of alkenes in the presence of alcohols in order to prepare carboxylic esters, but they also work well for synthesizing carboxylic acids or anhydrides.137 627 They have also been used as catalysts in many other carbonyl-based processes that are of interest to industry. The hydroxycarbonylation of butadiene, the dicarboxylation of alkenes, the carbonylation of alkenes, the carbonylation of benzyl- and aryl-halide compounds, and oxidative carbonylations have been reviewed.6 8 The Pd-catalyzed hydroxycarbonylation of alkenes has attracted considerable interest in recent years as a way of obtaining carboxylic acids. In general, in acidic media, palladium salts in the presence of mono- or bidentate phosphines afford a mixture of linear and branched acids (see Scheme 9). 

---