Grignard reagents anhydrides

Other Rea.ctlons, The anhydride of neopentanoic acid, neopentanoyl anhydride [1538-75-6] can be made by the reaction of neopentanoic acid with acetic anhydride (25). The reaction of neopentanoic acid with acetone using various catalysts, such as titanium dioxide (26) or 2irconium oxide (27), gives 3,3-dimethyl-2-butanone [75-97-8] commonly referred to as pinacolone. Other routes to pinacolone include the reaction of pivaloyl chloride [3282-30-2] with Grignard reagents (28) and the condensation of neopentanoic acid with acetic acid using a rare-earth oxide catalyst (29). Amides of neopentanoic acid can be prepared direcdy from the acid, from the acid chloride, or from esters, using primary or secondary amines. 

The refined grade s fastest growing use is as a commercial extraction solvent and reaction medium. Other uses are as a solvent for radical-free copolymerization of maleic anhydride and an alkyl vinyl ether, and as a solvent for the polymerization of butadiene and isoprene usiag lithium alkyls as catalyst. Other laboratory appHcations include use as a solvent for Grignard reagents, and also for phase-transfer catalysts. 

Use of the imonium group for protection of enones was explored. Stability to peracids, lead tetraacetate, bromine, and acetic anhydride was claimed (727). The usual resistance of enamines (but not their salts) to additions of Grignard reagents was used for selective addition to a 3,17-diketosteroid by formation of the usual 3-monoenamine 728). 

By reaction of 3-thienyllithium with magnesium bromide, the Grignard reagent, free from entrainment Grignard reagent, was obtained,- which is useful for the preparation of 3-acetothiophene by reaction with acetic anhydride at —70 0 and for the preparation of 3-t-butoxythiophene through reaction with t-butyl perbenzoate. It is the opinion of the present author that most 3-substituted thiophenes are prepared more conveniently from 3-thienyllithium than from 3-thenyl bromide. The latter method, however, is superior if the introduction of the 3-thenyl group is desired. 

Ullmann condensation of the sodium salt of p-chlorothiophe-nol (31) with 2-iodobenzoic (32) acid gives 33. Cyclization by means of sulfuric acid affords the thioxanthone, 34. Reaction with the Grignard reagent from 3-dimethylaminopropyl chloride affords the tertiary carbinol (35). Dehydration by means of acetic anhydride affords chlorprothixene as a mixture of geometric isomers, 36. (Subsequent work showed the Z isomer-chlorine and amine on the same side—to be the more potent compound.) Chlorprothixene is said to cause less sedation than the phenothiazines. ... 

Acid halides are among the most reactive of carboxylic acid derivatives and can be converted into many other kinds of compounds by nucleophilic acyl substitution mechanisms. The halogen can be replaced by -OH to yield an acid, by —OCOR to yield an anhydride, by -OR to yield an ester, or by -NH2 to yield an amide. In addition, the reduction of an acid halide yields a primary alcohol, and reaction with a Grignard reagent yields a tertiary alcohol. Although the reactions we ll be discussing in this section are illustrated only for acid chlorides, similar processes take place with other acid halides. 

Few racemic alkyl p-tolyl sulphoxides were prepared in rather low yields (16—40%) by the reaction of Grignard reagents with mixed anhydrides 108, 109 and compound HO formed in situ from p-toluenesulphinic acid and 3-phthalimidoxy-l,2-benzoisothiazole 1, 1-dioxide167 (equation 59). The mixed anhydrides 109 or 110 when reacted with cyclopen-tene and cyclohexene enamines 111 gave the corresponding a-ketocycloalkyl sulphoxides 112 in low yields (10-41%) along with small amounts of several by-products such as disulphides and thiosulphonates167 (equation 60). 

The formation of halogenation products from Grignard reagents and sulfonic acid anhydrides is the result of an oxidative reaction pathway . This side-reaction can be reduced by using sulfonic acid esters, however, in these cases alkylations as well as twofold sulfonylations (cf. corresponding results with sulfonyl fluorides ) are competing (equations 64 and 65). 

The addition of Grignard reagents to aldehydes, ketones, and esters is the basis for the synthesis of a wide variety of alcohols, and several examples are given in Scheme 7.3. Primary alcohols can be made from formaldehyde (Entry 1) or, with addition of two carbons, from ethylene oxide (Entry 2). Secondary alcohols are obtained from aldehydes (Entries 3 to 6) or formate esters (Entry 7). Tertiary alcohols can be made from esters (Entries 8 and 9) or ketones (Entry 10). Lactones give diols (Entry 11). Aldehydes can be prepared from trialkyl orthoformate esters (Entries 12 and 13). Ketones can be made from nitriles (Entries 14 and 15), pyridine-2-thiol esters (Entry 16), N-methoxy-A-methyl carboxamides (Entries 17 and 18), or anhydrides (Entry 19). Carboxylic acids are available by reaction with C02 (Entries 20 to 22). Amines can be prepared from imines (Entry 23). Two-step procedures that involve formation and dehydration of alcohols provide routes to certain alkenes (Entries 24 and 25). 

---