Grans method potentiometric titration

Among the possible analytical methods for alkalinity determination, Gran-type potentiometric titration [2] combined with a curve-fitting algorithm is considered a suitable method in seawaters because it does not require a priori knowledge of thermodynamic parameters such as activity coefficients and dissociation constants, which must be known when other analytical methods for alkalinity determination are applied [3-6],... 

Chloride can also be estimated by potentiometric titration using standard silver nitrate [27]. The results are recorded directly and evaluated by means of a computer program based on the Gran extrapolation method. The determinations have a precision of 0.02% and since many samples can be titrated simultaneously, the time for a single determination can be reduced to less than 5 min. 

The fluoride ion selective electrode is the most popular means of fluoride ion determination after sample destruction by any method but it does have limitations. It can be used either directly to measure the fluoride potential6 or as an end-point detector in a potentiometric titration with a lanthanum(l II) reagent as titrant.4,7 Problems can be experienced with potential drift in direct potentiometry, especially at low fluoride ion concentrations. Titration methods often yield sluggish end points unless water miscible solvents are used to decrease solubilities and increase potentia 1 breaks and sulfate and phosphate can interfere. End-point determination can be facilitated by using a computerized Gran plotting procedure.4... 

Fig. 13.2. Methods for determining the equivalence point of a potentiometric titration curve (including acid-base titrations), (a) First derivative (b) Second derivative (c) Gran plot for titration of a strong acid with a strong base Vx is the initial volume of acid and V the volume of base added.

The acid-base equilibrium constants of the beta-blockers atenolol, oxprenolol, timolol, and labetalol were determined by automated potentiometric titrations. The pKg values were obtained in water-rich or water methanol medium (20% MeOH) to obviate the solubility problems associated with the compounds. The initial estimates of pKa values were obtained from Gran s method and then, were refined by the NYTIT and ZETA versions of the LETAGROP computer program. The resultant values were 9.4 (/ = 0.1 M KCI, 20% methanol) for atenolol, 9.6 (/ = 0.1 M KCI) for oxprenolol, 9.4 (/ = 0.1 M KCI, 20% methanol) for timolol and 7.4 and 9.4 (/ = 0.1 M KCI) for labetalol. The potentiometric method was found to be accurate and easily applicable. The operational criteria for applying the methodology are indicated. 

Total dissolved inorganic carbon can also be evaluated from the potentiometric titration method described in Section 8.4.1, if it is performed in a closed cell. However, this technique does not give the highest precision possible and thus the coulometiic method first described by Johnson et al. (1985) and outlined here is nowadays the method of choice. Nevertheless, Ct can be evaluated from the potentiomettic titration curve, either Gran function linearization (Section 8.4.2.3 Gran evaliiation ) or by a curve fitting procedure (Section 8.4.2.3 Non-linear curve-fitting ). 

---