Grain size number

GRAIN SIZE NUMBER. 852E+01. 838E+01. 793E-01... 

Traditional letter to denote product hardness Measured magnitude Grain size (number) used in tool PN-61/M-59107 Product hardness on Mohs scale units i ... 

There are two commonly used ways of characterizing the grain size of a crystalline solid. One is the ASTM grain size number, N, defined by... 

EXAMPLE 1.1. Figure 1.1 is a micrograph taken at 200X. What is the ASTM grain size number ... 

What is the linear intercept grain size (in millimeters) corresponding to an ASTM grain size number of 8 ... 

If the ASTM grain size number is increased by one, by what factor is the number of grains per volume changed ... 

Little difference was observed in the hardness values between the two cold-worked plus solution-treated and double-aged (STDA) Inconel 718 materials, although a significant difference in ASTM grain size numbers was apparent. 

Table II. Heat Treatment, Hardness, and ASTM Grain Size Number Relative to VIM-VAR Inconel 718 and Udimet 718...

Joining similar materials with structural differences, such as differences in thermomechanical processing, grain size, number of impurity elements, grain boundary segregates, may cause deviation from the performance expected. 

The rationale behind the assigmnent of the grain-size number to these various charts is as follows Let G represent the grain-size munber, and let n be the average number of grains per square inch at a magnification of lOOx. These two parameters are related to each other through the expression ... 

Relationships have been developed that relate mean intercept length to ASTM grain-size number these are as follows ... 

Concept Chech 4.4 Does the grain-size number (G of Equation 4.17) increase or decrease with decreasing grain size Why ... 

Comparison of a photomicrograph (taken at a magnification of 100 X) with ASTM standard comparison charts may be used to specify grain size in terms of a grain-size number. 

Grain-size number and mean intercept length are related per Equations 4.19a and 4.19b. 

Determine the ASTM grain-size number if O 30 grains per square inch are measured at a magnification of 250 X. 

---