Glass transition side groups

When dipoles are directly attached to the chain their movement will obviously depend on the ability of chain segments to move. Thus the dipole polarisation effect will be much less below the glass transition temperature, than above it Figure 6.4). For this reason unplasticised PVC, poly(ethylene terephthalate) and the bis-phenol A polycarbonates are better high-frequency insulators at room temperature, which is below the glass temperature of each of these polymers, than would be expected in polymers of similar polarity but with the polar groups in the side chains. 

Molecular Motion in amorphous atactic polystyrene (PS) is more complicated and a number of relaxation processes, a through 5 have been detected by various techniques as reviewed recently by Sillescu74). Of course, motions above and below the glass transition temperature Tg have to be treated separately, as well as chain and side group mobility, respectively. Motion well above Tg as well as phenyl motion in the glassy state, involving rapid 180° jumps around their axes to the backbone has been discussed in detail in Ref.17). Here we will concentrate on chain mobility in the vicinity of the glass transition. 

The most common backbone structure found in commercial polymers is the saturated carbon-carbon structure. Polymers with saturated carbon-carbon backbones, such as polyethylene, polypropylene, polystyrene, polyvinyl chloride, and polyacrylates, are produced using chain-growth polymerizations. The saturated carbon-carbon backbone of polyethylene with no side groups is a relatively flexible polymer chain. The glass transition temperature is low at -20°C for high-density polyethylene. Side groups on the carbon-carbon backbone influence thermal transitions, solubility, and other polymer properties. 

As was expected, the substitution of PPO with rigid and bulky side groups decreases the flexibility of the polymer chain and the glass transition temperatures of modified polymers increases. This... 

The approximately random placement of side groups in atactic polymers prevents them from developing regular structures. For this reason, atactic polymers are non-crystalline and behave as rubbers or glasses, depending on whether they are above or below their glass transition temperature. 

Several factors related to chemical structure are known to affect the glass transition tempera lure. The most important factor is chain stiffness or flexibility of the polymer. Main-chain aliphatic groups, ether linkages, and dimethylsiloxane groups build flexibility into a polymer and lower Tg Aliphatic side chains also lower Tg, (he effect of the length of aliphatic groups is illustrated by the methacrylate series (4,38) ... 

A third factor influencing the value of Tg is backbone symmetry, which affects the shape of the potential wells for bond rotations. This effect is illustrated by the pairs of polymers polypropylene (Tg=10 C) and polyisobutylene (Tg = -70 C), and poly(vinyi chloride) (Tg=87 C) and poly(vinylidene chloride) (Tg =- 19°C). The symmetrical polymers have lower glass transition temperatures than the unsymmetrical polymers despite the extra side group, although polystyrene (100 C) and poly(a-meth-ylstyrene) are illustrative exceptions. However, tacticity plays a very important role (54) in unsymmetrical polymers. Thus syndiotactic and isoitactic poly( methyl methacrylate) have Tg values of 115 and 45 C respectively. 

For instance, the Dow experimental membrane and the recently introduced Hyflon Ion E83 membrane by Solvay-Solexis are "short side chain" (SSC) fluoropolymers, which exhibit increased water uptake, significantly enhanced proton conductivity, and better stability at T > 100°C due to higher glass transition temperatures in comparison to Nafion. The membrane morphology and the basic mechanisms of proton transport are, however, similar for all PFSA ionomers mentioned. The base polymer of Nation, depicted schematically in Figure 6.3, consists of a copolymer of tetrafluoro-ethylene, forming the backbone, and randomly attached pendant side chains of perfluorinated vinyl ethers, terminated by sulfonic acid head groups. °... 

The key to a controlled molecular weight build-up, which leads to the control of product properties such as glass transition temperature and melt viscosity, is the use of a molar excess of diisopropanolamine as a chain stopper. Thus, as a first step in the synthesis process, the cyclic anhydride is dosed slowly to an excess of amine to accommodate the exothermic reaction and prevent unwanted side reactions such as double acylation of diisopropanolamine. HPLC analysis has shown that the reaction mixture after the exothermic reaction is quite complex. Although the main component is the expected acid-diol, unreacted amine and amine salts are still present and small oligomers already formed. In the absence of any catalyst, a further increase of reaction temperature to 140-180°C leads to a rapid polycondensation. The expected amount of water is distilled (under vacuum, if required) from the hot polymer melt in approximately 2-6 h depending on the anhydride used. At the end of the synthesis the concentration of carboxylic acid groups value reaches the desired low level. 

Due to the side chains this poiymer is amorphous with a glass transition temperature of 185 °C. In contrast, unsubstituted poly(arylene ether ketone)s are crystalline and high melting (T > 300 °C).The iR spectrum shows absorption bands at 3300 cm" and 1710-1730 cm" for the acid group in the side chain and at 1650 cm" for the keto group. 

---