Glass fibers advantages

Another development features a nonmetallic belt [Pla.st. Des. Process., 13 (July 1968)]. When rapid heat transfer is the objective, a glass-fiber, Teflon-coated construction in a thickness as httle as 0.08 mm (0.003 in) is selected for use. No performance data are available, but presumably the thin belt permits rapid heat transfer while taking advantage of the nonsticking property of Teflon. Another development [Food Process. Mark., 69 (March 1969)] is extending the capa-bihty of belt solidification by providing use of subzero temperatures. 

Natural fibers compete with technical fibers, such as glass fibers or carbon fibers, as reinforcements for plastics. The advantages of technical fibers are their good mechanical properties, which vary only a little, but their recycling is difficult. 

Fibrous fillers are now gaining more importance over particulate fillers due to the high performance in mechanical properties. The influence of fiber diameter on the tensile behavior of short glass fiber on polyimide was reported [95], At higher concentrations thick fibers seem to be more advantageous probably because of the... 

The heat distortion temperature of styrene polymers is insufficient for some applications, but can be improved by copolymerization with monomers such as -methylstyrene or maleic anhydride. Maleic anhydride copolymers are excellently suited to the manufacture of foamed articles. The advantages of glass-fiber reinforcement are greater in such copolymers than in polystyrene itself. 

This brief summary of the composition and structural characteristics of glass fibers, whiskers, and carbon and graphite fibers illustrates the ranges of synthetic inorganic fibrous materials. The purposes of the construction of these materials is to capitalize on the physical and chemical advantages of the fibrous morphology, size, and state. 

The NIR region is of great interest for pharmaceutical applications. NIRS is fast, nondestructive, and cost effective. Samples require no preparation and can be measured as such, intact and available for further analysis. NIRS can be performed in-, on-, and offline. Also, glass fiber optics can be used to perform remote analysis, thus bringing radiation directly to the sample. Many more advantages can be cited when considering the practical use of NIR in a pharmaceutical process, depending on the particular objective. 

---