Thermal gasification

Five main methods of feedstock recycling have been considered in this book, classified according to the degradation conditions and the products obtained chemical depolymerization, gasification, thermal treatments, catalytic cracking and reforming, and hydrogenation. 

Melt gasification Thermal Macroporous Nakahata and Nakajima (2004) 2004... 

The thermal degradation of mixtures of the common automotive plastics polypropylene, ABS, PVC, and polyurethane can produce low molecular weight chemicals (57). Composition of the blend affected reaction rates. Sequential thermolysis and gasification of commingled plastics found in other waste streams to produce a syngas containing primarily carbon monoxide and hydrogen has been reported (58). 

Synthesis gas is obtained either from methane reforming or from coal gasification (see Coal conversion processes). Telescoping the methanol carbonylation into an esterification scheme furnishes methyl acetate directly. Thermal decomposition of methyl acetate yields carbon and acetic anhydride,... 

Gasification. Conversion of biomass to gaseous fuels can be accompHshed by several methods only two are used by the biomass energy industry (ca 1992). One is thermal gasification in which LHV gas, ie, producer gas, is produced. The other process is anaerobic digestion, which yields an MHVgas. 

A survey of commercial thermal gasification in the United States shows that few gasifiers have been installed since 1984 (115). Most units in use are retrofitted to small boilers, dryers, and kilns. The majority of existing units operate at 0.14 to 1.0 t/h of wood wastes on updraft moving grates. The results of this survey are summarized in Table 36. Assuming all 35 of these units are operated continuously, extremely unlikely, the maximum amount of LHV gas that can be produced is about 0.003 to 0.006 EJ/yr (222—445 td /d). 

Research Needsfor Thermal Gasification of Biomass, Compiled by StudsvikAB Thermal Processes, for International Energy Agency, IGT, Chicago, Mar. 1992,... 

Coal can be converted to gas by several routes (2,6—11), but often a particular process is a combination of options chosen on the basis of the product desired, ie, low, medium, or high heat-value gas. In a very general sense, coal gas is the term appHed to the mixture of gaseous constituents that are produced during the thermal decomposition of coal at temperatures in excess of 500°C (>930°F), often in the absence of oxygen (air) (see Coal CONVERSION PROCESSES, gasification) (3). A soHd residue (coke, char), tars, and other Hquids are also produced in the process ... 

Chemistry. Coal gasification iavolves the thermal decomposition of coal and the reaction of the carbon ia the coal, and other pyrolysis products with oxygen, water, and hydrogen to produce fuel gases such as methane by internal hydrogen shifts... 

Petroleum. Thermal cracking (pyrolysis) of petroleum or fractions thereof was an important method for producing gas in the years following its use for increasing the heat content of water gas. Many water gas sets operations were converted into oil-gasification units (55). Some of these have been used for base-load city gas supply, but most find use for peak-load situations in the winter. 

Goal Processing to Synthetic Fuels and Other Products. The primary approaches to coal processing or coal conversion are thermal decomposition, including pyrolysis or carbonization (5,6), gasification (6), and Hquefaction by hydrogenation (6). The hydrogenation of coal is not currently practiced commercially. 

It is not possible, however, to calculate accurately actual gas composition by using the relationships of reactions (27-14) to (27-19) in Table 27-12. Since the gasification of coal always takes place at elevated temperatures, thermal decomposition (pyrolysis) takes place as coal enters the gasification reactor. Reaction (27-15) treats coal as a compound of carbon and hydrogen and postulates its thermal disintegration to produce carbon (coke) ana methane. Reaction (27-21) assumes the stoichiometiy of hydrogasifying part of the carbon to produce methane and carbon. 

---