Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Gases changes

Plants have evolved and adapted to suit the atmospheric conditions in which they find themselves. This atmosphere may contain traces of gases which we would classify as pollutants. However, in many cases these may be necessary for the plants existence. Near to industrial centers, the relative concentrations of the various gases change, and this can have an adverse effect on the plants development. [Pg.754]

Calculate the volume of dry air that was dissolved in the water Tinder the conditions of the experiment. How does the solubility of gases change with a change in the pressure What was the composition of the gas that evolved from the water ... [Pg.80]

The column represents a resistance to the carrier gas flow and this resistance depends primarily on the column temperature since both viscosity and density of gas change with temperature. Figure 6.2 shows how the viscosity of four common carrier gases changes as a function of temperature. [Pg.293]

A gas does not change either to a liquid or to a solid on heating. It only gets hotter and expands. However, when cooled sufficiently, gases change to liquids. [Pg.27]

The equilibrium constant expression for this equation is Keq = [Cf [D]d [Af [B]b. (It is assumed that there are no solid or liquid reactants or products. Only aqueous solutions and gases change concentrations as they reach equilibrium and then maintain constant concentrations at equilibrium. Also, brackets represent moles/liter.)... [Pg.311]

Ceramics Acid gases Change in surface appearance... [Pg.536]

The stoppered culture tests generated initial specific rates of 02 consumption and C02 production by suspended A. annua cells grown under various conditions. The apparent specific productivities of ethylene were disappointingly inconsistent and are thus not reported. The initial specific rates were those rates occurring shortly after the cultures were stoppered, before the concentrations of gases changed drastically. [Pg.55]

You may have heard a common joke about Canadian weather If you don t like it, wait an hour and it will change. While this is an exaggeration, atmospheric pressure and temperature rarely remain constant for any extended period of time. Since the volume of gases changes when pressure and temperature change, standards have been designed to allow a comparison of different gas volumes. [Pg.452]

What are the properties that distinguish between solids, liquids and gases Firstly, solids have a fixed shape, whereas liquids and gases change shape spontaneously - they flow and so must be kept in a container. [Pg.11]

If a reaction involves a change in the total number of moles of gases, changing the volume (or pressure) of a reaction mixtrue changes the value of Q it does not change the value of K. For such a reaction ... [Pg.724]

When oil shale is heated at a constant rate, the alkene/alkane ratios in the evolved hydrocarbon gases change with time. In addition, the alkene/alkane ratios in both the gas and the oil are affected by an inert sweep gas. The ethene/ethane ratio is not determined by equilibrium with hydrogen, and we interpret this phenomenon in terms of a free-radical cracking mechanism. The implication is that alkene/alkane ratios, especially the ethene/ethane ratio, can be used as an indicator of retort performance only if the correct relationships are used for each set of retort conditions. [Pg.96]

Figure 1. Effect of pressure (p), temperature (T), salinity (S), and excess air (Z jx) on gas / partitioning of Xe and Ne. Arrows indicate the increase of the noble gas concentrations in reaction to an increase of the respective property. The symbols mark the concentrations Q[p, T, S, Aex] being calculated for the physical conditions indicated by the numbers. Xe reacts sensitively to T changes but remains almost unaffected by injection and dissolution of air (+Aex). Ne behaves in the opposite way. Changing either pressure (+Ap) or salinity (S) has almost the same effect on all (noble) gases. Changes of the physical conditions prevailing gas exchange are imprinted and retained the specific noble gas pattern, which in turn can be back-translated in a most direct manner into information on environmental change. Figure 1. Effect of pressure (p), temperature (T), salinity (S), and excess air (Z jx) on gas / partitioning of Xe and Ne. Arrows indicate the increase of the noble gas concentrations in reaction to an increase of the respective property. The symbols mark the concentrations Q[p, T, S, Aex] being calculated for the physical conditions indicated by the numbers. Xe reacts sensitively to T changes but remains almost unaffected by injection and dissolution of air (+Aex). Ne behaves in the opposite way. Changing either pressure (+Ap) or salinity (S) has almost the same effect on all (noble) gases. Changes of the physical conditions prevailing gas exchange are imprinted and retained the specific noble gas pattern, which in turn can be back-translated in a most direct manner into information on environmental change.
Because the pressure in gases changes- very slowly with position, this is practically true for all moderate-size surfaces exposed to gases. [Pg.40]

FIRE WALL - The back end of a boiler, opposite the burner, at which the hot gases change direction of flow. [Pg.73]


See other pages where Gases changes is mentioned: [Pg.334]    [Pg.257]    [Pg.66]    [Pg.351]    [Pg.7]    [Pg.120]    [Pg.181]    [Pg.212]    [Pg.198]    [Pg.1447]    [Pg.1447]    [Pg.334]    [Pg.149]    [Pg.87]    [Pg.414]    [Pg.242]    [Pg.351]    [Pg.450]    [Pg.32]    [Pg.266]    [Pg.250]    [Pg.149]    [Pg.305]    [Pg.884]    [Pg.32]    [Pg.222]    [Pg.526]    [Pg.148]    [Pg.93]    [Pg.194]    [Pg.893]    [Pg.208]    [Pg.36]    [Pg.227]    [Pg.377]   
See also in sourсe #XX -- [ Pg.2 , Pg.4 , Pg.10 , Pg.20 , Pg.21 , Pg.41 , Pg.43 , Pg.44 , Pg.57 , Pg.58 , Pg.59 , Pg.60 , Pg.61 , Pg.62 , Pg.63 , Pg.75 , Pg.81 , Pg.84 , Pg.87 ]




SEARCH



Changing density gases

Climate change greenhouse gases

Climate change reducing greenhouse gases

Entropy Changes of an Ideal Gas

Entropy change mixing ideal gases

Entropy change with dissolution of a gas

Entropy changes in the ideal gas

Estimation of Change in Enthalpy, Entropy, and Gibbs Function for Ideal Gases

Gas composition, change

Gas-phase reaction with molar chang

Gas-phase reaction with molar change

Gases phase change

Global Climate Change Greenhouse Gases

High-temperature gases mass change analysis

High-temperature gases structural changes

Industrial gases industry change

Industrial gases industry separation power changes

Mechanisms of Conductivity Change in Polymer-Based Gas Sensors

Modelling dynamic changes in headspace gas composition

Property Changes of Mixing for Ideal Gases

Structural Changes in Gas-Solid Reactions

The entropy change to form an ideal gas mixture

VARMOL - Gas-Phase Reaction with Molar Change

© 2024 chempedia.info