Garnet resistivity

Fig. 7 Creep-resistance of the eutectic fiber consisting of interpenetrating phases of alpha-alumina and yttrium-aluminum-garnet (YAG) up to very high temperatures compared with other types of oxide fibers... 

Yttrium alloys have many applications. The metal doped with rare earths such as europium is used as phosphor for color television receivers. When added to iron, chromium, vanadium, niobium, and other metals it enhances resistance of these metals and their alloys to high temperature oxidation and recrystallization. It is a deoxidizer for vanadium and other nonferrous metals. Yttrium-aluminum garnets are used in lasers and in jewelery gemstones. Yttrium-iron garnets are used as transmitters and as transducers of acoustic energy. 

The third material — garnet or ilmenite — restores the breakthrough efficiency and surge resistance of the filter, providing the same media-particle surface area as the rapid sand filter. The small media particles also increase filter efficiency. The initial hcadloss through a 30-in.-deep mixed-media filter b 1.5 ft at a 5-gal/min per square foot of filter flow rate, comparable to a rapid sand filter of 0.5 mm and 30-in. depth run at the same rate. 

A further important feature of the garnets is their high electrical resistivity resulting in a high Q suitable for certain microwave devices. This is because they... 

Based on the leaching data [40,69,83] as well as data on radiation resistance of fast neutron irradiated [84-85] and actinide-doped Synrocs [86-88], as well as individual synthetic phases and their natural analogues study [14-18,89-91] zirconolite- and pyrochlore-based ceramics have been proposed for immobilization of excess plutonium and the other actinides. Moreover, additional phases, which were not part of the Synroc formulation, have been considered because of their chemical durability and radiation resistance (e.g., murataite, zircon, garnet, monazite, britholite). Of particular interest are the zirconate pyrochlores, many of which are extremely radiation resistant [8,92]. Zirconolite-based ceramics. Zirconolite, ideally CaZrTi207, is a major actinide host phase in the Synroc-type ceramics. Study of natural and synthetic samples... 

Fig. 19. Creep behavior of silicon nitride ceramics. The composition of this ceramic contains 7 vol % Y3A15Oi2 as a sintering aid. The specimens were hot-pressed at 1750°C under a pressure of 20 Mpa. The holding times are marked on the curve. This curve indicates that crystallization of the grain-boundary phase improves the creep resistance. Garnet crystals were observed at the grain boundaries after annealing [3/]. , Sample A60 , Sample B60 A, Sample B150, x, failure.

Use Neodymium salts, electronics, alloys, colored glass, (especially in astronomical lenses and lasers), to increase heat resistance of magnesium, metallurgical research, yttrium-garnet laser dope, gas scavenger in iron and steel manufacture. 

---