Fused atoms

The particle accelerator used at the Institute for Heavy Ion Research (GSI) in Darmstadt, Germany, for fusing atomic nuclei to make new superheavy elements. The GSI team have used this equipment to make all the elements from 107 to 112... 

In choosing where to start numbering, and in which direction to proceed, a hierarchy of rules must be followed. Numbering always begins at a nonfused atom adjacent to a fused atom, but since there are several possible orientations for the molecule, a choice is made as follows ... 

Figure 2-118, Cross-section of the 3D model of formic add (HCOOH), The van der Waals radius of each atom of the molecule is taken and by fusing the spheres the van der Waals surface is...

In this experiment a week of target bombardment was required to produce a single fused nucleus. The team confirmed the existence of element 109 by four independent measurements. The newly formed atom recoiled from the target at predicted velocity and was separated from smaller, faster nuclei by a newly developed velocity filter. The time of flight to the detector and the striking energy were measured and found to match predicted values. 

In spite of the diverse nature of alkaloid structures, two structural units, i.e. fused pyrrolidine and piperidine rings in different oxidation states, appear as rather common denominators. We therefore chose to give several examples for four types of synthetic reactions which have frequently been used in alkaloid total synthesis and which provide generally useful routes to polycyclic compounds with five- or six-membered rings containing one nitrogen atom. These are ... 

The interesting reactions where a free mercapto group is linked to the nitrogen atom of the thiazole (63), after the cleavage of a fused ring, is another illustration of the additive properties of the carbocation (Scheme 40). 

The bicyclic compound decahydronaphthalene, or bicyclo[4.4.0]decane, has two fused six-mem-bered rings. It exists in cis and trans forms (see Fig. 1.10), as determined by the configurations at the bridgehead carbon atoms. Both cis- and rran -decahydronaphthaiene can be constructed with two chair conformations. 

ULTRASONE Ultrasonic atomizer Ultrasonic bonding Ultrasonic devices Ultrasonic fusing Ultrasonic generators Ultrasonic instruments... 

Analyses of alloys or ores for hafnium by plasma emission atomic absorption spectroscopy, optical emission spectroscopy (qv), mass spectrometry (qv), x-ray spectroscopy (see X-ray technology), and neutron activation are possible without prior separation of hafnium (19). Alternatively, the combined hafnium and zirconium content can be separated from the sample by fusing the sample with sodium hydroxide, separating silica if present, and precipitating with mandelic acid from a dilute hydrochloric acid solution (20). The precipitate is ignited to oxide which is analy2ed by x-ray or emission spectroscopy to determine the relative proportion of each oxide. 

The accepted configuration of naphthalene, ie, two fused benzene rings sharing two common carbon atoms in the ortho position, was estabUshed in 1869 and was based on its oxidation product, phthaUc acid (1). Based on its fused-ring configuration, naphthalene is the first member in a class of aromatic compounds with condensed nuclei. Naphthalene is a resonance hybrid ... 

The commercial ores, beryl and bertrandite, are usually decomposed by fusion using sodium carbonate. The melt is dissolved in a mixture of sulfuric and hydrofluoric acids and the solution is evaporated to strong fumes to drive off siUcon tetrafluoride, diluted, then analy2ed by atomic absorption or plasma emission spectrometry. If sodium or siUcon are also to be determined, the ore may be fused with a mixture of lithium metaborate and lithium tetraborate, and the melt dissolved in nitric and hydrofluoric acids (17). 

When two fused six-membered rings (naphthalene analogues) are considered, possibilities become very numerous, partly on account of the reduced symmetry of naphthalene, compared with benzene, and also because of the larger number of positions available for substitution. Thus, there are two monoazanaphthalenes, quinoline (8) and isoquinoline (9), four benzodiazines [cinnoline (10), phthalazine (11), quinazoline (12) and quinoxaline(13)], with the two nitrogen atoms in the same ring, and six naphthyridines (e.g. (14), named and... 

---