Full-scale Engineered Barriers simulation

This paper will focus on the hydraulic properties of the swelling materials, especially on the bentonite that is used in the Full-scale Engineered Barrieres Experiment in Crystalline Rock (FEBEX). The influence of swelling will be shown in a simulated laboratory experiment and in the application on the FEBEX in situ experiment. 

THM SIMULATION OF THE FULL-SCALE IN-SITU ENGINEERED BARRIER SYSTEM EXPERIMENT IN GRIMSELTEST SITE IN SWITZERLAND... 

Abstract Coupled THM simulation of the FEBEX, which is the full-scale in-situ Engineered Barrier System Experiment performed in Grimsel Test Site in Switzerland, is one Task in the international cooperation project DECOVALEX III. In the Task, the simulation of the thermal, hydraulic and mechanical behaviour in the buffer during heating phase is required, e.g. the evolutions and the distributions of stress, relative humidity and temperature at the specified points in bentonite buffer material. 

The FEBEX is the full-scale in-situ Engineered Barrier System (EBS) Experiment performed in Grimsel Test Site (GTS) in Switzerland (enresa (2000)). The simulation of the coupled thermal, hydraulic and mechanical (THM) behaviour of FEBEX is the task of the DECOVALEX (DEvelopment of COupled models and their VALidation against Experiments) III. 

McKinley, 1., Kickmaier, W., del Olmo, C., Huertas F. 1996. The FEBEX project full-scale simulation of engineered barriers for a HLW repository. NAGRA Bulletin No. 27, NAGRA, Switzerland. 

---