Fuel cell catalytic activity

Alkaline solutions are generally known to lead to better catal5Tic activities than acidic solutions for many relevant electrode reactions. However, owing to the paucity in the development of suitable electrolyte materials, such as alkaline membranes, there has been much less fundamental work in the area of fuel cell catalysis in alkaline media. Nevertheless, there are a few hopeful developments in new alkaline polymer membranes [Varcoe and Slade, 2005] that are currently stirring up interest in smdying fuel cell catalytic reactions in alkalme solution. 

Cheekatamarla PK, Lane AM (2005) Catalytic autothermal reforming of diesel fuel for hydrogen generation in fuel cells I. Activity tests and sulfur poisoning. J Power Sources 152 256-263... 

Demirci investigated the degree of segregation and shifting of d-band centers by metal alloy combinations to improve the direct liquid fuel cell catalyst activity through electronic promotion of the dehydrogenation pathway [57]. He focused on Pt- and Pd-based catalyst for formic acid electrooxidation and looked at the potential impact of surface adatom adsorption of other 3d, 4d, and 5d transition metals. The criteria he imposed for improved catalytic activity on Pt and Pd... 

It was quite recently reported that La can be electrodeposited from chloroaluminate ionic liquids [25]. Whereas only AlLa alloys can be obtained from the pure liquid, the addition of excess LiCl and small quantities of thionyl chloride (SOCI2) to a LaCl3-sat-urated melt allows the deposition of elemental La, but the electrodissolution seems to be somewhat Idnetically hindered. This result could perhaps be interesting for coating purposes, as elemental La can normally only be deposited in high-temperature molten salts, which require much more difficult experimental or technical conditions. Furthermore, La and Ce electrodeposition would be important, as their oxides have interesting catalytic activity as, for instance, oxidation catalysts. A controlled deposition of thin metal layers followed by selective oxidation could perhaps produce cat-alytically active thin layers interesting for fuel cells or waste gas treatment. 

Reduction of trichloroethene to ethane took place in a modified fuel cell to which was introduced, although the loss of catalytic activity with time could present a serious limitation (Ju et al. 2006). 

Solid alkaline membrane fuel cells (SAMECs) can be a good alternative to PEMFCs. The activation of the oxidation of alcohols and reduction of oxygen occurring in fuel cells is easier in alkaline media than in acid media [Wang et al., 2003 Yang, 2004]. Therefore, less Pt or even non-noble metals can be used owing to the improved electrode kinetics. Eor example, Ag/C catalytic powder can be used as an efficient cathode material [Demarconnay et al., 2004 Lamy et al., 2006]. It has also... 

Lalande G, Faubert G, Cote R, Guay D, Dodelet JP, Weng LT, Bertrand P. 1996. Catalytic activity and stability of heat-treated iron phthalocyanines for the electroreduction of oxygen in polymer electrolyte fuel cells. J Power Sources 61 227-237. 

The Pt/Ru catalyst is the material of choice for the direct methanol fuel cell (DMFC) (and hydrogen reformate) fuel cell anodes, and its catalytic function needs to be completely understood. In the hrst approximation, as is now widely acknowledged, methanol decomposes on Pt sites of the Pt/Ru surface, producing chemisorbed CO that is transferred via surface motions to the active Pt/Ru sites to become oxidized to CO2... 

Binder H, Kohling A, Sandstede G. 1972. Effect of alloying components on the catalytic activity of platinum in the case of carbonaceous fuels. In Sandstede G, ed. From Electrocatalysis to Fuel Cells. Seattle University of Washington Press, p. 43. 

So far, certain biomimetic catalysts (1 and 2b in Fig. 18.17) have been shown to reduce O2 to H2O under a slow electron flux at physiologically relevant conditions (pH 7,0.2-0.05 V potential vs. NHE) and retain their catalytic activity for >10" turnovers. Probably, only the increased stability of the turning-over catalyst is of relevance to the development of practical ORR catalysts for fuel cells. In addition, biomimetic catalysts of series 1,2,3, and 5, and catalyst 4b are the only metalloporphyrins studied in ORR catalysis with well-defined proximal and distal environments. For series 2, which is by far the most thoroughly studied series of biomimetic ORR catalysts, these well-defined environments result in an effective catalysis that seems to be the least sensitive among all metalloporphyrins to the electrode material (whether the catalyst is adsorbed or in the film) and to chemicals present in the electrolyte or in the O2 stream, including typical catalyst poisons (CO and CN ). 

---