Initiating groups free radical

Unsaturated Group Reactions. In addition to a comprehensive review of these reactions (16), there are excellent texts (17,18). Free-radical-initiated polymerization of the double bond is the most common reaction and presents one of the more troublesome aspects of monomer manufacture and purification. 

Etherification and esterification of hydroxyl groups produce derivatives, some of which are produced commercially. Derivatives may also be obtained by graft polymerization wherein free radicals, initiated on the starch backbone by ceric ion or irradiation, react with monomers such as vinyl or acrylyl derivatives. A number of such copolymers have been prepared and evaluated in extmsion processing (49). A starch—acrylonitrile graft copolymer has been patented (50) which rapidly absorbs many hundred times its weight in water and has potential appHcations in disposable diapers and medical suppHes. 

Substitution Reactions on the Methyl Group. The reactions that give substitution on the methyl group are generally high temperature and free-radical reactions. Thus, chlorination at ca 100°C, or in the presence of ultraviolet light and other free-radical initiators, successively gives benzyl chloride, benzal chloride, and benzotrichloride. 

A waterborne system for container coatings was developed based on a graft copolymerization of an advanced epoxy resin and an acryHc (52). The acryhc-vinyl monomers are grafted onto preformed epoxy resins in the presence of a free-radical initiator grafting occurs mainly at the methylene group of the aHphatic backbone on the epoxy resin. The polymeric product is a mixture of methacrylic acid—styrene copolymer, soHd epoxy resin, and graft copolymer of the unsaturated monomers onto the epoxy resin backbone. It is dispersible in water upon neutralization with an amine before cure with an amino—formaldehyde resin. 

As mentioned in an earlier section (cf. Chapter 1, Section III), allylic positions are subject to attack by free radicals resulting in the formation of stable allyl radicals. A-Bromosuccinimide (NBS) in the presence of free-radical initiators liberates bromine radicals and initiates a chain reaction bromination sequence by the abstraction of allylic or benzylic hydrogens. Since NBS is also conveniently handled, and since it is unreactive toward a variety of other functional groups, it is usually the reagent of choice for allylic or benzylic brominations (7). 

The free radical initiators are more suitable for the monomers having electron-withdrawing substituents directed to the ethylene nucleus. The monomers having electron-supplying groups can be polymerized better with the ionic initiators. The water solubility of the monomer is another important consideration. Highly water-soluble (relatively polar) monomers are not suitable for the emulsion polymerization process since most of the monomer polymerizes within the continuous medium, The detailed emulsion polymerization procedures for various monomers, including styrene [59-64], butadiene [61,63,64], vinyl acetate [62,64], vinyl chloride [62,64,65], alkyl acrylates [61-63,65], alkyl methacrylates [62,64], chloroprene [63], and isoprene [61,63] are available in the literature. 

Polystyrene (PS) is the fourth big-volume thermoplastic. Styrene can be polymerized alone or copolymerized with other monomers. It can be polymerized by free radical initiators or using coordination catalysts. Recent work using group 4 metallocene combined with methylalumi-noxane produce stereoregular polymer. When homogeneous titanium catalyst is used, the polymer was predominantly syndiotactic. The heterogeneous titanium catalyst gave predominantly the isotactic. Copolymers with butadiene in a ratio of approximately 1 3 produces SBR, the most important synthetic rubber. 

Aldehydes, formates, primary, and secondary alcohols, amines, ethers, alkyl halides, compounds of the type Z—CH2—Z, and a few other compounds add to double bonds in the presence of free-radical initiators/ This is formally the addition of RH to a double bond, but the R is not just any carbon but one connected to an oxygen or a nitrogen, a halogen, or to two Z groups (defined as on p. 548). The addition of aldehydes is illustrated above. Formates and formamides " add similarly ... 

Similar additions have been successfully carried out with carboxylic acids, anhydrides, acyl halides, carboxylic esters, nitriles, and other types of compounds. These reactions are not successful when the alkene contains electron-withdrawing groups such as halo or carbonyl groups. A free-radical initiator is required, usually peroxides or UV light. The mechanism is illustrated for aldehydes but is similar for the other compounds ... 

The most important results of the linear free energy equations in this study (Table IV) are the applications to which they can be used. For a new free radical initiator, belonging to any of the four radical forming reactions of this study, equation 6 should be useful to predict the rate of decomposition with reasonable accuracy. All that is needed is an HMD calculation to obtain the pi-delocalization energy for the radical formed in the reaction (R ) and an estimate of the steric A values for groups bonded to the central carbon of R. ... 

As already shown, it is technically possible to incorporate additive functional groups within the structure of a polymer itself, thus dispensing with easily extractable small-molecular additives. However, the various attempts of incorporation of additive functionalities into the polymer chain, by copolymerisation or free radical initiated grafting, have not yet led to widespread practical use, mainly for economical reasons. Many macromolecular stabiliser-functionalised systems and reactive stabiliser-functionalised monomers have been described (cf. ref. [576]). Examples are bound-in chromophores, e.g. the benzotriazole moiety incorporated into polymers [577,578], but also copolymerisation with special monomers containing an inhibitor structural unit, leading to the incorporation of the antioxidant into the polymer chain. Copolymers of styrene and benzophenone-type UV stabilisers have been described [579]. Chemical combination of an antioxidant with the polymer leads to a high degree of resistance to (oil) extraction. 

Co within all compounds of the so-called cobalamin (or B12) family. The biological functions of cobalamin cofactors are defined by their axial substituents either a methyl or an adenosyl group. Both cofactors participate in biosynthesis the former in methyl transfer reactions while the latter is a free radical initiator, abstracting H atoms from substrates. Decades after their initial characterization, the fascination with the biological chemistry of cobalamins remains.1109... 

The majority of commercial polystyrene molecules consist of a backbone of carbon atoms with phenyl groups attached to half of the carbon atoms, as shown in Fig. 21.1. Free radical initiator residues terminate each end of the chain. Minor variants include chains terminated by anionic or cationic initiator residues. All commercial polystyrene products are atactic that is, the placement of the phenyl groups on either side of the chain is essentially random, as illustrated in Fig. 21.2. 

A radical initiator based on the oxidation adduct of an alkyl-9-BBN (47) has been utilized to produce poly(methylmethacrylate) (48) (Fig. 31) from methylmethacrylate monomer by a living anionic polymerization route that does not require the mediation of a metal catalyst. The relatively broad molecular weight distribution (PDI = (MJM ) 2.5) compared with those in living anionic polymerization cases was attributed to the slow initiation of the polymerization.69 A similar radical polymerization route aided by 47 was utilized in the synthesis of functionalized syndiotactic polystyrene (PS) polymers by the copolymerization of styrene.70 The borane groups in the functionalized syndiotactic polystyrenes were transformed into free-radical initiators for the in situ free-radical graft polymerization to prepare s-PS-g-PMMA graft copolymers. 

---