Formulation with fillers

Of course, TPS are formulated with fillers, oils and other additives like other thermoplastics. Generally, SBS is preferred for the manufacture of footwear and other similar parts, and the modification of bitumen and asphalt. 

Of course, TPOs can be formulated with fillers, plasticizers and other additives like other... 

After shaping, the articles are most often subjected to a step to remove the processing oil or solvent from the gel. An extraction, washing, or leaching step is introduced in order to remove the processing oil and the lubricant (36). In formulations with filler, the extruded sheets are preferably subjected to an extraction step to remove processing oil. 

It is also possible to act over the heat generation factor. This can be decreased by diluting the formulation with fillers or fibers. But this depends... 

The system can be formulated with fillers, pigments and auxiliaries. They cure with aminic hardeners at room temperature according to the two-pack process. Specific construction applications with the above development are as follows ... 

Curing is usually carried out in a formulation with fillers, plasticizers and curing-rate modifers hke stearic d [17],... 

---