Mixed fluorinated

Perfluorinated acid fluorides containing heteratoms are also accessible by ECF. Long-chain perfluorinated acid fluorides produced by ECF containing nitrogen (10—12), oxygen (13), and sulfur (14,15) have been reported. The fluorinated mixed sulfonic acid—carboxyflc acid precursors are also known. ECF of hydrocarbon sultones has led to formation of FS02(CF2) C0F, where n = 2,3 (16). 

Excimer (reactive gases such as chlorine and fluorine mixed with inert gases such as argon)... 

The mix of inductive and resonance effects varies from one halogen to another but the net result is that fluorine chlorine bromine and iodine are weakly deactivating ortho para directing substituents... 

FLUORINECOMPOUNDS,ORGANIC - FLUORINATED AROMATIC COMPOUNDS] (Volll) -in mixing IXING AND BLENDING] (Vol 16)... 

The most important of the halogenated derivatives of acetic acid is chloroacetic acid. Fluorine, chlorine, bromine, and iodine derivatives are all known, as are mixed halogenated acids. For a discussion of the fluorine derivatives see Fluorine compounds, organic. 

K [14881-07-3], Rb [72151 -96-3], and Cs [72138-72-8]), are prepared by reaction of elemental fluorine, chlorine trifluoride, or xenon difluoride and a mixture of nickel fluoride and alkaH metal fluorides or other metal haHdes (16,17). If the fluorination is carried out using mixed fluorides, a lower temperature can be used, yields are quantitative, and the final products are of high purity. Bis(tetrafluoroammonium) hexafluoronickelate [6310540-8], (NE 2N iF6> prepared from Cs2NiF3 and NE SbE by a metathesis in anhydrous HE, is also known (18). 

Another impetus to expansion of this field was the advent of World War 11 and the development of the atomic bomb. The desired isotope of uranium, in the form of UF was prepared by a gaseous diffusion separation process of the mixed isotopes (see Fluorine). UF is extremely reactive and required contact with inert organic materials as process seals and greases. The wartime Manhattan Project successfully developed a family of stable materials for UF service. These early materials later evolved into the current fluorochemical and fluoropolymer materials industry. A detailed description of the fluorine research performed on the Manhattan Project has been pubUshed (2). 

In early reaction systems (9,10,31,32) the vaporized hydrocarbon was combined with nitrogen in a reactor and mixed with a nitrogen—fluorine mixture from a preheated source. The jet reactor (11) for low molecular weight fluorocarbons was an important improvement. The process takes place at around 200—300°C, and fluorination is carried out in the vapor state. 

Figure 6.23 Fluorine-19 nmr spectra of mixtures of boron halides showing the presence of mixed fiuorohalogeno-boranes.

The mixed halides TeClFs and TeBrFs are made by oxidative fluorination of TeCU or TeBr4 in a stream of Fi diluted with N2 at 25°. Under similar conditions Tel4 gave only TeFg and IF5. TeClFs can also be made by the action of GIF on TcF4, TeCU or Te02 below room temperature it is a colourless liquid, mp —28°, bp 13.5°, which does not react with Hg, dry metals or glass at room temperature. 

The formation of the BeF2 molecule can be explained by assuming that, as two fluorine atoms approach Be, the atomic orbitals of the beryllium atom undergo a significant change. Specifically, the 2s orbital is mixed or hybridized with a 2p orbital to form two new sp hybrid orbitals. (Figure 7.12). 

In order to increase the efficiency of the fluorination process, the tantalum-niobium-containing raw material must be milled and well mixed with ammonium hydrofluoride. It is assumed that the process temperature can be set between 200-350°C. 

---