Flow of fluids through granular beds and packed columns

Flow of Fluids through Granular Beds and Packed Columns 

In a contact sulphuric acid plant the secondary converter is a tray type converter, 2.3 m in diameter with the catalyst arranged in three layers, each 0.45 m thick. The catalyst is in the form of cylindrical pellets 9.5 mm in diameter and 9.5 mm long. The void fraction is 0.35. The gas enters the converter at 675 K and leaves at 720 K. Its inlet composition is  

The gas flowrate is 0.68 kg/m2s. Calculate the pressure drop through the converter. The 

Two heat-sensitive organic liquids of an average molecular mass of 155 kg/kmol are to be separated by vacuum distillation in a 100 mm diameter column packed with 6 mm stoneware Raschig rings. The number of theoretical plates required is 16 and it has been found that the HETP is 150 mm. If the product rate is 5 g/s at a reflux ratio of 8, calculate the pressure in the condenser so that the temperature in the still does not exceed 395 K (equivalent to a pressure of 8 kN/m2). It may be assumed that a = 800 m2/m3, li = 0.02 mN s/m2, e = 0.72 and that the temperature changes and the correction for liquid flow may be neglected. 

A column 0.6 m diameter and 4 m high is, packed with 25 mm ceramic Raschig rings and used in a gas absorption process carried out at 101.3 kN/m2 and 293 K. If the liquid and gas properties approximate to those of water and air respectively and their flowrates are 2.5 and 0.6 kg/m2s, what is the pressure drop across the column In making calculations, Carman s method should be used. By how much may the liquid flow rate be increased before the column floods  

---

FLOW OF FLUIDS THROUGH GRANULAR BEDS AND PACKED COLUMNS... 

---