Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Flange rating

Table 1.4. Flange Ratings for Different Materials Strength of Materials... Table 1.4. Flange Ratings for Different Materials Strength of Materials...
In addition to the above back pressure limitations based on valve capacity, balanced bellows PR valves are also subject to back pressure limitations based on the mechanical strength of the bellows or bellows bonnet, or the valve outlet flange rating. The back pressure specified for the valve is governed by the lowest back pressure permitted by these various criteria. [Pg.161]

To the maximum pressure permitted for the outlet flange rating by ANSI. This applies to both conventional and bellows valves. [Pg.198]

If there is a preference as to horizontal or vertical split casing, it should be stated., Also the suction and discharge connections should be stated as to top or end, or special, together with the preference as to flanged (rating) or screwed. Small pumps are commonly furnished with screwed connections unless otherwise specified. [Pg.210]

Increasing the size of an impeller always increases its maximum discharge pressure. Hence, increasing the impeller diameter may be unlawful, depending on the flange rating of downstream heat exchangers. [Pg.314]

Range of instrument and manufacturer s accuracy Materials of construction, especially of process contact (wetted) parts Process connection details (e.g., chemical seals, capillary lengths, flange rating)... [Pg.602]

Flange rating and type of facing is specified in data sheets. Flange facing finish shall be minimum per ASME B16.5. [Pg.274]

Vf times lower of the maximum outlet flange rating pressure or maximum allowable backpressure per the manufacturer s catalogue... [Pg.275]

Proeess eonneetion details (e g., chemical seals, capillary lengths, flange rating)... [Pg.579]

A valve list is often made to include the numerical order and their face-to-face dimensions of the valves used and other data such as ANSI flange ratings. [Pg.321]

All the items associated with each package are identified and listed, usually by function. So, e.g., instruments, insulation, and flange ratings will be listed separately. This work can be done when constmction is say 80% complete. The constmction personnel prepare a punch list for its own use, which it will use to check the work it is finishing. They will use this list to fix the problems that they have uncovered. [Pg.710]


See other pages where Flange rating is mentioned: [Pg.96]    [Pg.78]    [Pg.10]    [Pg.10]    [Pg.198]    [Pg.370]    [Pg.384]    [Pg.385]    [Pg.428]    [Pg.280]    [Pg.104]    [Pg.104]    [Pg.10]    [Pg.10]    [Pg.193]    [Pg.84]    [Pg.87]    [Pg.98]    [Pg.399]    [Pg.407]    [Pg.78]    [Pg.275]    [Pg.132]    [Pg.120]    [Pg.531]    [Pg.1117]    [Pg.1120]    [Pg.1131]    [Pg.10]    [Pg.65]    [Pg.1120]    [Pg.1123]    [Pg.1134]    [Pg.320]    [Pg.444]   
See also in sourсe #XX -- [ Pg.399 ]

See also in sourсe #XX -- [ Pg.17 , Pg.575 ]

See also in sourсe #XX -- [ Pg.17 , Pg.461 ]




SEARCH



© 2024 chempedia.info