Flammability terms

J. A. Finn, in 6th International Symposium on Flammability and Flame Retardants, Nashville, Term., 1979. 

Extreme caution must be taken to prevent the possibility of fire when using flammable removers. Extra care must be taken when stripping on location to secure the area of ignition sources. When used on lacquer finishes, the dissolved finish and remover combined are extremely flammable. Natural mbber, neoprene, or other gloves suitable for use with the remover formula must be worn. The effect of skin contact with the remover is limited because there is immediate irritation and discomfort. Canister respirators are available for most petroleum and oxygenate remover solvents. Symptoms of long-term overexposure should be compared to symptoms of the major ingredients in the formula. 

Butylenes are not toxic. The effect of long-term exposure is not known, hence, they should be handled with care. Reference 96 Hsts air and water pollution factors and biological effects. They are volatile and asphyxiants. Care should be taken to avoid spills because they are extremely flammable. Physical handling requires adequate ventilation to prevent high concentrations of butylenes in the air. Explosive limits in air are 1.6 to 9.7% of butylenes. Their flash points range from —80 to —73° C. Their autoignition is around 324 to 465°C (Table 2). Water and carbon dioxide extinguishers can be used in case of fire. 

Safe dilution requirements can be given for the gas phase in a flammability diagram or equation (270,273). Alternatively, safe vapor dilution can be given in terms of the Hquid storage conditions where allowance can be made for solubility of the inert gas in Hquid ethylene oxide (273). 

Combustible Eiquid A term used to classify certain liquids that will burn on the basis of flash points. The National Fire Protection Association (NFPA) defines a combustible liquid as having a flash point of 100°F (37.8°C) or higher. See also, Flammable Liquid. Class II liquids have flash points at or above 100°F, but below 140°F. Class III liquids are subdivided into two subclasses. 

---