Fibre-reinforced thermoplastic composites

Obtain specific properties using, for example, a self-lubricating composite insert. Discontinuous fibre reinforced thermoplastic composites can also be overmoulded onto GMT sheets. [Pg.744]

Sato N., Kurauchi T., Sato S. and Kamigaito O. (1983). SEM observation of the initiation and propagation of cracks in a short fibre reinforced thermoplastic composite under stress. J. Mater. Sci. Lett. 2, 188-190. [Pg.277]

Hinrichsen, E. (1994) Preparation and characterisation of natural fibre reinforced thermoplastics composites, MPhil thesis, Brunei University, UK... [Pg.216]

Damage tolerance of fibre reinforced thermoplastic composites Processing of polymer matrices using resin transfer moulding Fractal analysis of wear in short-fibre reinforced thermoplastic composites Rheology flow behavior of associative polymers in coating applications Kevlar-thermoplastic composites... [Pg.72]

D.C. Leach, Continuous fibre reinforced thermoplastic composites,... [Pg.466]

Thermoplastics offer a wide variety of properties ranging from the low intrinsic stiffness and high design freedom of neat and short fibre reinforced thermoplastics to the high intrinsic stiffness and low design freedom of continuous fibre reinforced thermoplastic composites. Different polymeric... [Pg.112]

Source Reprinted with permission from Zhen Mei, Chung DDL, Glass transition and melting behavior of carbon fibre reinforced thermoplastic composite, studied by electrical resistance measurement, Polymer Composites, 21(5), 2000. Copyright 2000, The Society of Plastics Engineers. [Pg.840]

Nejhad MNG, Parvizimajidi A, Impact behaviour and damage tolerance of woven carbon-fibre reinforced thermoplastic composites. Composites, 21(2), 155-168, 1990. [Pg.855]

Davies P, Cantwell WJ, Jar PY, Bourban PE, Zysman V, Kausch HH, Joining and repair of a carbon fibre reinforced thermoplastic. Composites, 22(6), 425-431, 1991. [Pg.947]

Short fibre reinforced thermoplastic composites can be processed by most of the classical thermoplastic processing techniques, such as, extrusion and injection moulding. A detailed discussion is provided for these classical thermoplastic processing techniques in Section 9.1. [Pg.344]

The field of natural fibre reinforced thermoplastic composite materials is now rapidly growing both in terms of industrial applications and fundamental research. [Pg.349]

Smiley, A.J. (1988) Diaphragm forming of carbon fibre reinforced thermoplastic composite materials. University of Delaware, PhD dissertation. [Pg.495]

Barnes, J.A. and Cogswell, F.N. (1989) Transverse flow processes in continuous fibre-reinforced thermoplastic composites. Composites, 20(1), 38-42. [Pg.782]

O Bradaigh, C., Pipes, R. and Mallon, P. (1991), Issues in diaphragm forming of continuous fibre reinforced thermoplastic composites . Polymer Composites, 12, 246-256. [Pg.138]

Zampaloni, M., Pourboghrat, F. and Yu, W. (2004), Stamp thermo-hydroforming A new method for processing fibre-reinforced thermoplastic composite sheets . Journal of Thermoplastic Composite Materials, 17, 31-50. DOI 10.1177/0892705704038219. [Pg.138]

To maximise the mechanical properties of short fibre-reinforced thermoplastic composites, it is necessary to achieve effective stress transfer between fibre and polymer matrix and appropriate fibre alignment in the finished component relative to the direction of applied stress. The former requirement is governed primarily by the method of compounding, whilst fibre orientation is very dependent on moulding conditions [76]. [Pg.244]

Lucintel, a global market research firm, has studied the sector. They reviewed the global short fibre reinforced thermoplastic composites market and estimated that the sector could reach approximately 5.99 billion by 2019 [4]. [Pg.216]

Folkes, M.J. and Wong, W.K., Determination of interfacial shear strength in fibre-reinforced thermoplastic composites. Polymer, 28, 1309-1314 (1987). [Pg.658]

A.E. (2003) Novel pulp fibre reinforced thermoplastic composites. Compos. Sci. Technol., 63, 137-152. [Pg.563]

Andersen T L (1997), Development of a rapid press consolidation technique for continuous fibre reinforced thermoplastic composites , Andersen S I et al., Polymeric Composites - Expanding the Limits, Proceedings of the 18th Ris0 International Symposium on Materials Science, Riso, Denmark, 1-5 September 1997, pp. 237-244. [Pg.214]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...