Ferricyanide-peroxide reaction

Srikantan and Rao (79) reported that the ferrocyanide catalysis is not first order in peroxide as found by Kistiakowsky but much more complicated. No details of the experiments were given. They also studied the ferricyanide-peroxide reaction and found that in the dark there was a pronounced induction period after which the decomposition rate was first order in peroxide concentration. Illuminating for five minutes in bright sunlight removed this induction period but the subsequent first order rate is somewhat less than the original dark rate. They suggest that the induction period was the time taken to build up on... 

A number of chemiluminescent reactions may proceed through unstable dioxetane intermediates (12,43). For example, the classical chemiluminescent reactions of lophine [484-47-9] (18), lucigenin [2315-97-7] (20), and transannular peroxide decomposition. Classical chemiluminescence from lophine (18), where R = CgH, is derived from its reaction with oxygen in aqueous alkaline dimethyl sulfoxide or by reaction with hydrogen peroxide and a cooxidant such as sodium hypochlorite or potassium ferricyanide (44). The hydroperoxide (19) has been isolated and independentiy emits light in basic ethanol (45). 

Reaction takes place ia aqueous solution with hydrogen peroxide and catalysts such as Cu(II), Cr(III), Co(II), ferricyanide, hernia, or peroxidase. Chemiluminescent reaction also takes place with oxygen and a strong base ia a dipolar aprotic solvent such as dimethyl sulfoxide. Under both conditions Qcis about 1% (light emission, 375—500 am) (105,107). 

The most suitable oxidizing agent is potassium ferricyanide, but ferric chloride, hydrogen peroxide ia the presence of ferrous salts, ammonium persulfate, lead dioxide, lead tetraacetate or chromate, or silver and cupric salts may be useful. Water mixed, eg, with methanol, dimethylformamide, or glycol ethers, is employed as reaction medium. 

Again, as with pyridopyrimidines, the main reaction is oxidation of di- or poly-hydro derivatives to fully aromatic structures, often merely by air or oxygen. In some cases the reagent of choice is mercury(II) oxide, whilst other reagents used include sulfur, bromine, chloranil, chromium trioxide-acetic acid, hydrogen peroxide, and potassium ferricyanide, which also caused oxidative removal of a benzyl group in the transformation (306) (307)... 

Ferricyanide catalyses the decomposition of H2O2 at pH 6-8. The reaction is first-order in peroxide but the dependence on oxidant concentration is complex . The Arrhenius plots were curved but averaged values indicated that at pH 7 and 8, respectively, E is 25+2 and 11 + 1.5 kcal.mole". Clearly several processes are contributing to the overall reaction. 

For analysis in solutions, the most frequently used CL reaction is alkaline oxidation of luminol and lucigenin in the presence of hydrogen peroxide as oxidant, although sodium hypochlorite, sodium perborate, or potassium ferricyanide may also be used. CL reactions involving alkaline oxidation have been used to indicate acid-base, precipitation, redox, or complexometric titration endpoints either by the appearance or the quenching of CL when an excess of titrant is present [114, 134], An example of these mechanisms is shown in Figure 14. 

Here A and B are non-luminescence molecules. The C is the excited state of the product C. Often these reactions involve oxidation reactions and the presence of a catalyst. Both chemical and biochemical reactions could generate the photon. The intensity of the photons are collected through optical fibers and measured with a photon detector. The most successful chemiluminescence sensor for the detection of the hydrogen peroxide [13] is based on luminol using ferricyanide as catalyst... 

Olah and co-workers reported the synthesis of 2,2,5,5-tetranitronorbornane (127) from 2,5-norbornadiene (122). In this synthesis formylation of (122) with formic acid yields the diformate ester (123), which on treatment with chrominm trioxide in acetone yields 2,5-norbomadione (124). Formation of the dioxime (125) from 2,5-norbornadione (124) is followed by direct oxidation to 2,5-dinitronorbomane (126) with peroxytriflnoroacetic acid generated in situ from the reaction of 90 % hydrogen peroxide with TFAA. Oxidative nitration of 2,5-dinitronorbornane (126) with sodium nitrite and potassium ferricyanide in alkaline solution generates 2,2,5,5-tetranitronorbornane (127) in excellent yield. 

This enzyme [EC 1.3.3.1] catalyzes the reaction of (5)-dihydroorotate with dioxygen to produce orotate and hydrogen peroxide. The enzyme requires FAD and FMN as cofactors. Ferricyanide can also serve as a substrate as well. 

This FAD-dependent enzyme [EC 1.11.1.1] catalyzes the reaction of NADH with hydrogen peroxide to produce NAD+ and two water. Ferricyanide, quinones, and other compounds can replace hydrogen peroxide in this enzyme-catalyzed reaction. 

The best known and most nsefnl of the chemiluminescent reactions involving electron transfer is the oxidation of luminol (3.100) or its derivatives in alkaline medium. The oxidant can be hydrogen peroxide, sodium ferricyanide or hypochlorite, usually with a catalyst that can be a transition metal ion, such as Cu " Co +, Fe + and Mtf+, or haem and haemproteins, e.g. peroxidases. The reaction mode is shown in Figure 3.22.4"... 

The addition of excess quantities of hydrogen peroxide, ferricyanide, or nitrobenzene to the catalyst in the presence of added alkali did not result in catalytic reduction, implying that the reverse aging reaction was not the fastest reaction involved similar additions of benzoquinone or benzaldehyde resulted in catalytic reduction, implying that the reverse aging reaction in these cases was the fastest. 

Inclusion in the reaction of a cooxidant serves to return the osmium to the osmium tetroxide level of oxidation and allows for the use of osmium in catalytic amounts. Various cooxidants have been used for this purpose historically, the application of sodium or potassium chlorate in this regard was first reported by Hofmann [7]. Milas and co-workers [8,9] introduced the use of hydrogen peroxide in f-butyl alcohol as an alternative to the metal chlorates. Although catalytic cis dihydroxylation by using perchlorates or hydrogen peroxide usually gives good yields of diols, it is difficult to avoid overoxidation, which with some types of olefins becomes a serious limitation to the method. Superior cooxidants that minimize overoxidation are alkaline t-butylhydroperoxide, introduced by Sharpless and Akashi [10], and tertiary amine oxides such as A - rn e t h y I rn o r p h o I i n e - A - o x i d e (NMO), introduced by VanRheenen, Kelly, and Cha (the Upjohn process) [11], A new, important addition to this list of cooxidants is potassium ferricyanide, introduced by Minato, Yamamoto, and Tsuji in 1990 [12]. 

Figure 11.2 Schematic of GOx-SWNT-based glucose sensor. Glucose oxidase immobilized on the nanotube surface catalyzes the oxidation of glucose. The reaction by-product, hydrogen peroxide, then reacts with the reaction mediator, potassium ferricyanide, adsorbed to the nanotube surface resulting in an increase in SWNT fluorescence. Adapted with permission from Ref. 28.

---