Ethylene oligomerization olefins process

Chevron-Gulf process -ethylene oligomerization [OLEFINS, HIGFIER] (Vol 17)... 

Shell Higher Olefin Process) plant (16,17). C -C alcohols are also produced by this process. Ethylene is first oligomerized to linear, even carbon—number alpha olefins using a nickel complex catalyst. After separation of portions of the a-olefins for sale, others, particularly C g and higher, are catalyticaHy isomerized to internal olefins, which are then disproportionated over a catalyst to a broad mixture of linear internal olefins. The desired fraction is... 

Butene. Commercial production of 1-butene, as well as the manufacture of other linear a-olefins with even carbon atom numbers, is based on the ethylene oligomerization reaction. The reaction can be catalyzed by triethyl aluminum at 180—280°C and 15—30 MPa ( 150 300 atm) pressure (6) or by nickel-based catalysts at 80—120°C and 7—15 MPa pressure (7—9). Another commercially developed method includes ethylene dimerization with the Ziegler dimerization catalysts, (OR) —AIR, where R represents small alkyl groups (10). In addition, several processes are used to manufacture 1-butene from mixed butylene streams in refineries (11) (see BuTYLENEs). 

Shell Higher Olefins Process (SHOP). In the Shell ethylene oligomerization process (7), a nickel ligand catalyst is dissolved in a solvent such as 1,4-butanediol (Eig. 4). Ethylene is oligomerized on the catalyst to form a-olefins. Because a-olefins have low solubiUty in the solvent, they form a second Hquid phase. Once formed, olefins can have Htfle further reaction because most of them are no longer in contact with the catalyst. Three continuously stirred reactors operate at ca 120°C and ca 14 MPa (140 atm). Reactor conditions and catalyst addition rates allow Shell to vary the carbon distribution. 

Biphasic catalysis is not a new concept for oligomerization chemistry. On the contrary, the oligomerization of ethylene was the first commercialized example of a biphasic, catalytic reaction. The process is known under the name Shell Higher Olefins Process (SHOP) , and the first patents originate from as early as the late 1%0 s. 

In addition to the neutral nickel/phosphine complexes used in the Shell Higher Olefins Process (SHOP), cationic Ni-complexes such as [(mall)Ni(dppmo)][SbF6] (see Figure 5.2-7) have attracted some attention as highly selective and highly active catalysts for ethylene oligomerization to HAOs [106]. 

Apart from the UOP Pacol process, today s only other meaningful economic process is the Shell higher olefin process (SHOP) in which /z-olefins are produced by ethylene oligomerization. Until 1992 Hiils AG used its own technology to produce -60,000 t/year of /z-olefins by the chlorination of /z-paraffins (from Molex plant) and subsequent dehydrochlorination [13]. In the past, the wax cracking process (Shell, Chevron) played a certain role. In the Pacol and Hiils processes, olefins are obtained as diluted solutions in paraffin (Pacol to max. 20%, Hiils about 30%) without further processing these are then used for alkylation. In contrast, the SHOP process produces pure olefins. 

Catalysts based on nickel that dimerize or oligomerize a-olefins have been known for many years and are commercially valuable. The Shell higher olefin process (SHOP), for example, uses Ni(II) catalysts developed by Keim and coworkers such as 1.1 and 1.2 bearing P-O chelating ligands to oligomerize ethylene into higher olefins in the manufacture of surfactants, lubricants, and fine chemicals (Fig. 1) [9-11]. Late transition metals are more suited for the polymerization of... 

SHOP [Shell Higher Olefins Process] A process for producing a-olefins by oligomerizing ethylene, using a proprietary rhodium/phosphine catalyst. The a-olefins can then be iso-merized to internal olefins as required. Invented by W. Keim in the Institut fur Technische Chemie und Petrolchemie, Aachen, in the 1970s. The first plant was built in Geismar, LA, in 1979 the second in Stanlow, Cheshire, in 1982. Licensed worldwide by a consortium of Union Carbide, Davy-McKee, and Johnson Matthey. 

Alkenes. At present alkene isomerization is an important step in the production of detergent alkylates (Shell higher olefin process see Sections 12.3 and 13.1.3).264 265 Ethylene oligomerization in the presence of a nickel(O) catalyst yields terminal olefins with a broad distribution range. C4-C6 and C2o+ alkenes, which are not suitable for direct alkylate production, are isomerized and subsequently undergo metathesis. Isomerization is presumably carried out over a MgO catalyst. 

Oligomerization of ethylene to higher even carbon number alpha olefins. This is the growth part of the Shell Higher Olefin Process (SHOP) Unit. 

Aluminum alkyls used in making organometallic catalysts and as initiators for processes such as ethylene-propylene rubber, polybutadiene, low-pressure polyethylene, and ethylene oligomerization to make alpha-olefins and C6-C18 alcohols... 

Probably the first example of a process employing the biphasic concept is the Shell process for ethylene oligomerization in which the nickel catalyst and the ethylene reactant are dissolved in 1,4-butanediol, while the product, a mixture of linear alpha olefins, is insoluble and separates as a second (upper) liquid phase (see Fig. 7.1). This is the first step in the Shell Higher Olefins Process (SHOP), the largest single feed application of homogeneous catalysis [7]. 

The chelate effect is important in the oxidative additions of P—C bonds which, in the case of nickel, give P—O and P—N chelate complexes of the type used as ethylene oligomerization catalysts in the Shell higher olefin process (SHOP),91 for example,... 

Shell manufactures a-olefins from ethylene by oligomerization with a nickel catalyst in a polar solvent such as ethylene glycol, under the conditions specified in Equation 27. This corresponds to the first part of the SHOP process (Shell Higher Olefin Process) described in Section 6.2.2. The world production is estimated to be over 1 Mt/a. 

---