Diisobutylaluminum hydride, reduction esters

Mono MOM derivatives of diols can be prepared from the ortho esters by diisobutylaluminum hydride reduction (46-98% yield). In general, the most hindered alcohol is protected. ... 

Several synthetic methods for the reduction of a-amino esters have also been reported. The reduction of methyl or ethyl esters by diisobutylaluminum hydride (DIBAL-H) at low temperature (—78 °C) has been described as useful for the preparation of a-amino aldehydes. 1118 20 Again, this method suffers from overreduction. Reductive methods involving mild reductive agents have been described. The reduction of phenyl esters 6 21 (readily prepared from the corresponding amino acid 5) with lithium tri-ferf-butoxyaluminum hydride is efficient for the preparation of various Boc-a-amino aldehydes including Na-Boc-7V J-nitroargininal and A7a-Boc-W"-Z-argininal (Scheme 5). 

For example, the partial reduction of an ester by diisobutylaluminum hydride (DIBAH) is an important laboratory-scale method of aldehyde synthesis. The reaction is normally carried out at -78°C (dry-ice temperature) in toluene solution. 

A third method of aldehyde synthesis is one that we ll mention here just briefly and then return to in Section 21.6. Certain carboxylic acid derivatives can be partially reduced to yield aldehydes. The partial reduction of an ester by diisobutylaluminum hydride (DIBAH) for instance, is an important laboratory-scale method of aldehyde synthesis, and mechanistically related processes also occur in biological pathways. The reaction is normally carried out at -78 °C (dry-ice temperature) in toluene solution. 

The procedure outlined above describes the selective, retentive, p-coupling of (Z)-2,3-dibromopropenoic acid ethyl ester with (trimethylsilyl)acetylene employing the palladium-modified version of the Castro-Stephens reaction.4 5 The dibromide starting material is readily available by bromination of ethyl propiolate (Procedure A), as described by Trippett and Hall.2 The coupling product has been shown to be a versatile precursor for the synthesis of variously substituted enynes and enediynes. For example, a second acetylene may be introduced into the a-position under modified coupling conditions. Alternatively, reduction of the ester with diisobutylaluminum hydride and protection of the resultant alcohol with tert-butyldiphenylsilyl chloride affords a vinyl bromide that can be metalated and trapped with various electrophiles. These procedures have been used on the gram and multigram scale.5... 

BOM-protected lactaldehyde is available from lactate 282 via a two-step sequence involving reduction of the ester to alcohol 283 followed by Collins oxidation [100,186], or directly by partial reduction of the ester with diisobutylaluminum hydride in hexane at — 90 °C (80% yield) [100]. 

The synthesis of naturally occurring A-acetylneuraminic acid (912) utilizes the chirality of D-lactate (898) to set the stereochemistry of hetero Diels-Alder adduct 910 [247] (Scheme 121). The dienophile, ( S)-seleno aldehyde 908, is prepared by inversion of mesylate 906 followed by controlled reduction of the ester with diisobutylaluminum hydride at low tern-... 

Alternatively, (trimethylenemethane)iron complexes can be synthesized by disproportionation of tricarbonyl(2-methallyl)ironJ Enantiomerically pure tricarbonyl-(trimethylenemethane)iron complexes can be obtained by resolution of the racemic mixture via diastereomeric esters or amides. (5)-(-)-Ethyl lactate and (/ I)-(+)-a-methyl-benzylamine are employed as resolving reagents for this piupose. The chiral auxiliaries can be removed by a variety of reagents leaving the (trimethylenemethane)iron fragment unaffected. Treatment of both the corresponding Boc-protected amides and the chiral esters with diisobutylaluminum hydride (DIBAL) or methyllithium provides the primary or tertiary alcohols, respectively. Saponification of the ester with lithium hydroxide in methanol and subsequent acidification of the mixture affords the methyl ester. Treatment of the ester with triethylsilane leads to complete reduction of the functionality to leave a methyl group (Scheme 4—85). ... 

The usual chemistry of carboxylic acids can also be carried out in proximity of the (T) -diene)iron moiety. The stereocontrolling effect of the iron complex moiety is not exploited in this case as usually no new stereogenic centers are formed in the course of this transformation. Such reactions include reduction of esters with diisobutylaluminum hydride to the corresponding alcohols. The same reagent can be used for a... 

The crucial cyclization of 129 was accomplished by oxidation with pyri-dinium chlorochromate (PCC) and acetylation, providing two cyclohexane derivatives (130 and 131) in the ratio of 10 1. Thermal decarboxylation of 130 resulted in formation of the cyclohexene derivative 132, with concomitant elimination. Reduction of the ester group with diisobutylaluminum hydride converted 132 into 133. Hydroboration-oxidation of 133 gave the carba-sugar derivative 134 as a single product. 

The most widely used reagent for partial reduction of esters and lactones at the present time is diisobutylaluminum hydride (DiBAlH).83 By use of a controlled amount of the reagent at low temperature, partial reduction can be reliably achieved. The selectivity results from the relative stability of the hemiacetal intermediate that is formed. The aldehyde is not liberated until the hydrolytic workup and is therefore not... 

Perlmutter used an oxymercuration/demercuration of a y-hydroxy alkene as the key transformation in an enantioselective synthesis of the C(8 ) epimeric smaller fragment of lb (and many more pamamycin homologs cf. Fig. 1) [36]. Preparation of substrate 164 for the crucial cyclization event commenced with silylation and reduction of hydroxy ester 158 (85-89% ee) [37] to give aldehyde 159, which was converted to alkenal 162 by (Z)-selective olefination with ylide 160 (dr=89 l 1) and another diisobutylaluminum hydride reduction (Scheme 22). An Oppolzer aldol reaction with boron enolate 163 then provided 164 as the major product. Upon successive treatment of 164 with mercury(II) acetate and sodium chloride, organomercurial compound 165 and a second minor diastereomer (dr=6 l) were formed, which could be easily separated. Reductive demercuration, hydrolytic cleavage of the chiral auxiliary, methyl ester formation, and desilylation eventually led to 166, the C(8 ) epimer of the... 

A more useful way of reducing esters to ethers is a two-step procedure applied to the reduction of lactones to cyclic ethers. First the lactone is treated with diisobutylaluminum hydride in toluene at —78°, and the product - a lactol - is subjected to the action of triethylsilane and boron trifluoride etherate at —20° to —70°. y-Phenyl-y-butyrolactone was thus transformed to 2-phenyltetrahydrofuran in 75% yield, and 5-lactone of 3-methyl-5-phenyl-5-hydroxy-2-pentenoic acid to 4-methyl-2-phenyl-2,3-dihydropyran in 72% yield [1034]. 

An alternative access to murrayanine (9) was developed starting from the mukonine precursor 609. The reduction of the ester group of 609 using diisobutylaluminum hydride (DIBAL) afforded the benzylic alcohol 611. In a one-pot reaction, using very active manganese dioxide, 611 was transformed to murrayanine (9) (574) (Scheme 5.36). 

The other stereoselective synthesis/281 shown in Scheme 8, foresees conversion of Boc-L-Asp-OtBu 20 into the related (3-aldehyde 22 via the Weinreb amide 21 and its reduction with diisobutylaluminum hydride (DIBAL-H). Wittig condensation of 22 with the ylide derived from (3-carboxypropyl)triphenylphosphonium bromide using lithium hexamethyldisilaza-nide at —78 to 0°C, produces the unsaturated compound 23 which is catalytically hydrogenated to the protected L-a-aminosuberic acid derivative 24. Conversion of the co-carboxy group into the 9-fluorenylmethyl ester, followed by TFA treatment and reprotection of the M -amino group affords Boc-L-Asu(OFm)-OH (25). 

Polystyrene-bound carboxylic esters have been reduced with diisobutylaluminum hydride or lithium aluminum hydride. Use of the latter reagent can, however, lead to the formation of insoluble precipitates, which could readily cause problems if reactions are performed in fritted reactors. An alternative procedure for reducing carboxylic esters to alcohols involves saponification, followed by activation (e.g. as the mixed anhydride) and reduction with sodium borohydride (Entries 10 and 11, Table... 

Dichloro-2,2-difluoroethylene, 105 (Diethylamino)sulfur trifluoride, 110 Reduction reactions (see also Deoxygenation, Reductive. . . ) of acetals and ketals Dibromoalane, 237 Diisobutylaluminum hydride, 237 Triethylsilane-Tin(IV) chloride, 237 of acetates and other esters to alkanes Nickel boride, 197 Triphenylsilane, 334 of acyl halides to alcohols Sodium cyanoborohydride-Tin(II) chloride, 280... 

Scheme 1 Reduction of Peptide Esters to Peptide Aldehydes with Diisobutylaluminum Hydride...

The mechanism of diisobutylaluminum hydride reduction involves formation of a six-membered transition state with aluminum complexed to the carbonyl of the ester group, which is required for the delivery of the hydride from the electrophilic aluminum hydride to the carbonyl group. The alkoxy moiety is then displaced during workup resulting in the desired peptide aldehyde. This mechanism accounts for the fact that the reduction stops after the conversion of the ester into the aldehyde. 23 ... 

Amino acid and peptide aldehydes with one to three residues have been prepared successfully using diisobutylaluminum hydride. Z-Protected amino aldehydes such as Z-Leu-H, Z-Phe-H, Z-Cys(Bzl)-H, Z-Pro-H have been synthesized with little or no racemization (Table l). 5 The diisobutylaluminum hydride reduction can be used with both peptide esters and Z amino acid esters. However, the Boc protecting group is less stable when refluxed with diisobutylaluminum hydride, thus resulting in its loss while reducing Boc-Ala-OMe or Boc-Ser(OBzl)-OMe. 13 ... 

---