Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Esters, by carbonylation

General.—catalyst system for the production of linear acids or esters by carbonylation of terminal olefins has been described excellent yields and a high degree of linearity enhance the utility of this system. A related process concerning the carbonylation-dimerization of butadiene is noted a palladium acetonylacetonate-triphenylphosphine complex is catalytically active for the preparation of ethyl nona-3,8-dienoate from butadiene, carbon monoxide, and ethanol. The preparation of but-3-enylsuccinic acid by the catalysed carbonylation of allyl chlorides with double-bond insertion is reported the intermediacy of but-3-enoic acid is suggested. ... [Pg.103]

Carbonylation of the complex 548 proceeds in ethanol gives ethyl 3-chloro-3-butenoate (554), The lactone 555 and the two esters 556 and 557 are obtained by carbonylation of the dimeric complex 549. The oxidative carbonylation of allene in ethanol with PdCl2 gives ethyl itacoante (558), although the yield is low[498]. [Pg.103]

Triflates of phenols are carbonylated to form aromatic esters by using PhjP[328]. The reaction is 500 times faster if dppp is used[329]. This reaction is a good preparative method for benzoates from phenols and naphthoates (473) from naphthols. Carbonylation of the bis-triflate of axially chiral 1,1 -binaphthyl-2,2 -diol (474) using dppp was claimed to give the monocarboxy-late 475(330]. However, the optically pure dicarboxylate 476 is obtained under similar conditions[331]. The use of 4.4 equiv. of a hindered amine (ethyldiisopropylamine) is crucial for the dicarbonylation. The use of more or less than 4.4 equiv. of the amine gives the monoester 475. [Pg.193]

Under CO pressure in alcohol, the reaction of alkenes and CCI4 proceeds to give branched esters. No carbonylation of CCI4 itself to give triichloroacetate under similar conditions is observed. The ester formation is e.xplained by a free radical mechanism. The carbonylation of l-octene and CCI4 in ethanol affords ethyl 2-(2,2,2-trichloroethyl)decanoate (924) as a main product and the simple addition product 925(774]. ... [Pg.263]

Similarly to alkenes. alkynes also insert. In the reaction of 775 carried out under a CO atmosphere in AcOH, sequential insertions of alkyne, CO. alkene. and CO take place in this order, yielding the keto ester 776[483]. However, the same reaction carried out in THF in the presence of LiCl affords the ketone 777, but not the keto ester[484]. The tricyclic terpenoid hirsutene (779) has been synthesized via the Pd-catalyzed metallo-ene carbonylation reaction of 778 with 85% diastereoselectivity as the key reaction[485], Kainic acid and allo-kainic acid (783) have been synthesized by the intramolecular insertion ol an alkene in 780, followed by carbonylation to give 781 and 782[486],... [Pg.397]

AH the common monobasic (107) and dibasic esters (108) of tetrahydrofurfuryl alcohol have been prepared by conventional techniques the dibasic esters and some of the mono esters are effective as primary or secondary plasticizers for vinyl polymers. Tetrahydrofurfuryl acrylate [2399-48-6] and methacrjiate [2455-24-5] specialty monomers, have been produced by carbonylation (nickel carbonyl and acetylene) of the alcohol (109) as weU as by direct esterification (110—112) and ester interchange (111). [Pg.82]

The stoichiometric and the catalytic reactions occur simultaneously, but the catalytic reaction predominates. The process is started with stoichiometric amounts, but afterward, carbon monoxide, acetylene, and excess alcohol give most of the acrylate ester by the catalytic reaction. The nickel chloride is recovered and recycled to the nickel carbonyl synthesis step. The main by-product is ethyl propionate, which is difficult to separate from ethyl acrylate. However, by proper control of the feeds and reaction conditions, it is possible to keep the ethyl propionate content below 1%. Even so, this is significantly higher than the propionate content of the esters from the propylene oxidation route. [Pg.155]

Finally, intermediate cationic allyl complexes of palladium15,16 and ruthenium17, produced from allylic esters by the action of substoichiometric amounts of the metal catalyst, have been electronically inverted by reduction to become nucleophilic anion equivalents, which are capable of carbonyl addition. [Pg.452]

Optically Active 3-Hydroxy Esters by Condensation of ferf-Butyl ( + )-(/f)-2-(4-Mcthylphcnylsullinyl)acetate with Carbonyl Compounds General Procedure35,37 ... [Pg.659]

Carbonylation reactions have been observed using both Pd(II)-alkene complexes and CT-bonded Pd(II) species formed by oxidative addition. Under reductive conditions, the double bond can be hydrocarbonylated, resulting in the formation of a carboxylic acid or ester.238 In nucleophilic solvents, the intermediate formed by solvopalladation is intercepted by carbonylation and addition of nucleophilic solvent. In both types of reactions, regioisomeric products are possible. [Pg.748]

Allylic boranes such as 9-allyl-9-BBN react with aldehydes and ketones to give allylic carbinols. The reaction begins by Lewis acid-base coordination at the carbonyl oxygen, which both increases the electrophilicity of the carbonyl group and weakens the C-B bond to the allyl group. The dipolar adduct then reacts through a cyclic TS. Bond formation takes place at the 7-carbon of the allyl group and the double bond shifts.36 After the reaction is complete, the carbinol product is liberated from the borinate ester by displacement with ethanolamine. Yields for a series of aldehydes and ketones were usually above 90% for 9-allyl-9-BBN. [Pg.797]

Scheme 12.19 illustrates some cases in which ozonolysis reactions have been used in the course of syntheses. Entries 1 to 4 are examples of use of ozonolysis to introduce carbonyl groups under reductive workup. Entries 5 and 6 involve oxidative workup and give dicarboxylic acid products. The reaction in Entry 7 is an example of direct generation of a methyl ester by methoxide trapping. [Pg.1131]

The bidentate formate ligand of OsH(K2-02CH)(CO)(P,Pr3)2 is converted into a monodentate group by carbonylation. Thus, the reaction of this compound with carbon monoxide gives 0sH K1-0C(0)H (C0)2(P Pr3)2. Similarly, the addition of a stoichiometric amount of trimethylphosphite yields 0sH k -0C(0)H (C0) P(OMe)3 (P Pr3)2, and the addition of a stoichiometric amount of ethyne di-carboxylic methyl ester leads to 0sH K1-0C(0)H (C0)(r 2-Me02CC=CC02Me) (P Pr3)2, which in solution partially dissociates the alkyne. As is shown in... [Pg.29]

Ester hydrolysis, neighbouring group participation by carbonyl groups in, 28, 171... [Pg.337]

Neighbouring group participation by carbonyl groups in ester hydrolysis, 28, 171 Nitration, nitrosation, and halogenation, diffusion control and pre-association in, 16, 1 Nitrosation, mechanisms, 19, 381... [Pg.339]

Neighbouring Group Participation by Carbonyl Groups in Ester Hydrolysis... [Pg.171]

The first observation of a significant rate enhancement in the alkaline hydrolysis of an ester by a suitably positioned carbonyl group that was related to prior attack of hydroxide at the carbonyl group was made in 1955 (Djerassi and Lippman, 1955). However, in 1962, a more detailed mechanistic pathway was suggested which involved attack by hydroxide at an o-formyl or benzoyl group, followed by intramolecular nucleophilic attack on a benzoate ester (Newman and Hishida, 1962 Bender and Silver, 1962). [Pg.172]


See other pages where Esters, by carbonylation is mentioned: [Pg.198]    [Pg.198]    [Pg.110]    [Pg.159]    [Pg.515]    [Pg.198]    [Pg.198]    [Pg.110]    [Pg.159]    [Pg.515]    [Pg.136]    [Pg.363]    [Pg.511]    [Pg.181]    [Pg.79]    [Pg.80]    [Pg.452]    [Pg.460]    [Pg.115]    [Pg.216]    [Pg.1230]    [Pg.286]    [Pg.115]    [Pg.372]    [Pg.238]    [Pg.172]    [Pg.139]    [Pg.186]    [Pg.200]   
See also in sourсe #XX -- [ Pg.122 ]




SEARCH



Esters carbonyl

© 2024 chempedia.info