Enzyme-based biosensors electrode surface coatings

Construction of enzyme-based amperometric biosensors usually involves coating the electrode surface with both the enzymes and the mediator. The method adopted and concentrations used are important factors in the performance of the device. For extended use, covalent immobilization is the most satisfactory method. 

An important parameter in a number of fields is the study of inorganic phosphate. Recently, Kwan et al. [206,207] have reported on a screen-printed phosphate biosensor based on immobilised pyruvate oxidase (PyOD) for monitoring phosphate concentrations in a sequencing batch reactor system [206] and in human saliva [207]. The enzyme was immobilised by drop-coating a Nation solution onto the working electrode surface this was then covered by a poly(carbamoyl) sulfonate (PCS) hydrogel membrane. 

Fortier [6] found that AQ polymer from Eastman was not deleterious for the activity of a variety of enzymes such as L-amino acid oxidase, choline oxidase, galactose oxidase, and GOD. Following mixing of the enzyme with the AQ polymer, the mixture was cast and dried onto the surface of a platinum electrode. The film was then coated with a thin layer of Nafion to avoid dissolution of the AQ polymer film in the aqueous solution when the electrode was used as a biosensor. These easy-to-make amperometric biosensors, which were based on the amperometric detection of H202, showed high catalytic activity. 

---