Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Entropic/enthalpic effects

Table 1 shows the kinetic data available for the (TMSjsSiH, which was chosen because the majority of radical reactions using silanes in organic synthesis deal with this particular silane (see Sections III and IV). Furthermore, the monohydride terminal surface of H-Si(lll) resembles (TMSjsSiH and shows similar reactivity for the organic modification of silicon surfaces (see Section V). Rate constants for the reaction of primary, secondary, and tertiary alkyl radicals with (TMSIsSiH are very similar in the range of temperatures that are useful for chemical transformations in the liquid phase. This is due to compensation of entropic and enthalpic effects through this series of alkyl radicals. Phenyl and fluorinated alkyl radicals show rate constants two to three orders of magnitude... [Pg.118]

Once we have determined the entropy and enthalpy of polymerization, we can calculate the free energy of the process at a variety of temperatures. The only time this is problematic is when we are working near the temperatures of transition as there are additional entropic and enthalpic effects due to crystallization. From the free energy of polymerization, we can predict the equilibrium constant of the reaction and then use this and Le Chatelier s principle to design our polymerization vessels to maximize the percent yield of our process. [Pg.72]

How do entropic and enthalpic effects determine the miscibility of polymers in blends Which term dominates the formation of a miscible blend ... [Pg.211]

FIGURE 16.3 Dependences of the polymer retention volume on the logarithm of its molar mass M or hydrodynamic volume log M [T ] (Section 16.2.2). (a) Idealized dependence with a long linear part in absence of enthalpic interactions. Vq is the interstitial volume in the column packed with porous particles, is the total volume of liquid in the column and is the excluded molar mass, (b) log M vs. dependences for the polymer HPLC systems, in which the enthalpic interaction between macromolecules and column packing exceed entropic (exclusion) effects (1-3). Fully retained polymer molar masses are marked with an empty circle. For comparison, the ideal SEC dependence (Figure 16.3a) is shown (4). (c) log M vs. dependences for the polymer HPLC systems, in which the enthalpic interactions are present but the exclusion effects dominate (1), or in which the full (2) or partial (3,4) compensation of enthalpy and entropy appears. For comparison, the ideal SEC dependence (Figure 16.3a) is shown (5). (d) log M vs. dependences for the polymer HPLC systems, in which the enthalpic interactions affect the exclusion based courses. This leads to the enthalpy assisted SEC behavior especially in the vicinity of For comparison, the ideal SEC dependence (Eigure 16.3a) is shown (4). [Pg.460]

The efiect is thus not related to geometrical constraints induced on complexes anchored in mesoporous charmels (sometimes also called as confinement efiect, even if this definition is not properly correct), neither to shape-selectivity effects as possible in zeolites, since the size of mesoporous charmels is much larger than those of micro-porous materials. Instead, an effective modification on the characteristics of the fluids is observed due to the electrostatic field generated by the charmel walls. This is an enthalpic effect versus an entropic effect as observed when the modification is instead related to limitations in the translation modes of molecules. Recently, it was also demonstrated that wall curvature influence the molecular orientation of the... [Pg.90]

Although an interplay of enthalpic and entropic effects has been shown to be responsible for the reactivity order of the methylenecyclo-alkanes, one can summarize that generally the entropy effects caused by substituent variation at the developing carbenium center are small compared with the enthalpic effects. [Pg.102]

These correlations, especially with the donor number, mostly reflect the enthalpic effect. There was no correlation of the entropic effect with DN in the case of metal cations [86], since this term reflects more the extent of solvent orientation by the component of the redox system and disordering of the original solvent structure, than the strength of the complex-solvent interactions. Also, Svaan and Parker [96] did not find any correlation between the entropy of formation of different ion radicals and the empirical solvent parameter. [Pg.237]


See other pages where Entropic/enthalpic effects is mentioned: [Pg.409]    [Pg.368]    [Pg.634]    [Pg.69]    [Pg.205]    [Pg.231]    [Pg.104]    [Pg.680]    [Pg.199]    [Pg.199]    [Pg.81]    [Pg.132]    [Pg.36]    [Pg.37]    [Pg.74]    [Pg.83]    [Pg.116]    [Pg.262]    [Pg.409]    [Pg.185]    [Pg.233]    [Pg.309]    [Pg.72]    [Pg.852]    [Pg.436]    [Pg.74]    [Pg.83]    [Pg.217]    [Pg.35]    [Pg.203]    [Pg.326]    [Pg.37]    [Pg.9]    [Pg.103]    [Pg.162]    [Pg.33]    [Pg.192]    [Pg.25]    [Pg.1122]    [Pg.440]   
See also in sourсe #XX -- [ Pg.8 ]




SEARCH



Enthalpic

Enthalpic effect

Entrop

Entropic

Entropic effect

© 2024 chempedia.info