Enolates, boron stereoselectivity

The synthesis of the C(l)-C(6) subunit was based on addition of an enol boronate to 3-benzyloxypropanal through TS-1. Immediate reduction of the chelate is also stereoselective and provides the intermediate 13. These steps establish the configuration at C(2)-C(5). 

Organoaluminum reagents, 202 1,1,1-Trifluoroacetone, 323 Trityllithium, 338 Zinc chloride, 349 Stereoselective aldol reactions With boron enolates Boron trichloride, 43 Chlorodimethoxyborane, 73 9-(Phenylseleno)-9-borabicyclo-[3.3.1]nonane, 245 With silyl enol ethers... 

Regio- and stereoselective aldol condensations. The enol boronates of ketones, obtained by reaction with 1 and diisopropylethylamine (1 equiv.), react with both aliphatic and aromatic ketones at —78° to —15° to form p-hydroxy ketones with high sy/t-dia-stereoselectivity.2... 

In most boron-mediated aldol reactions, (Z)-boron enolates 7 and ( )-boron enolates 8 stereoselectively afford sy -aldols 9 and nnh-aldols 10, respectively, via a chelation-controlled transition state (Scheme 1). The (Z)-boron enolates 7 can be prepared from 6 by a combination of /i-Bu2BOTf and j-Pr2NEt, while a combination of (c-hex)2BCl and Et3N gives the ( )-boron enolates 8. (Abbreviations are defined in the Appendix at the end of this chapter.)... 

Trifluoromethylation of enolates. Bulky enol boronates undergo trifluoro-methylation with (1) in a stereoselective manner in cases such as the dienolates of 8a-... 

Volume 1 of a series of texts on carbon-carbon bond formation has been advertiseda section deals, for example, with the aldol and related reactions. The importance of the aldol reaction has already been illustrated in the above-mentioned syntheses of polyethers applications of boron enolates in stereoselective aldol condensations have been discussed and exemplified by Evans et al. ... 

Mori, Y., Manabe, K. and Kobayashi, S., Catalytic use of boron source for boron enolate mediated stereoselective aldol reactions in water, Angew. Chem. Lnt. Ed., 2001, 40, 2816-2818. 

Further studies on the use of boron enolates in stereoselective aldol reactions have appeared. Evans and his group have shown that the anticipated correlation between enolate geometry and the aldol stereochemistry in acyclic systems is not dependent on the boron ligand (Scheme 43). This independence is not... 

In Hayashi s rhodium-catalyzed conjugate addition of boronic acids (Scheme 2.41), (S)-BINAP (139) was used as the chiral ligand to mediate the reaction of cyclohexenone and phenyl-BBN 138. The boron enolate 140 thus formed was clearly identified und fully characterized by spectroscopy and chemical conversions. Taking advantage of the well-known potential of boron enolates for stereoselective aldol additions, the subsequent reaction with propanal led to the aldol adduct 141 that was obtained in dr >99 1 and 98% ee (cf. Section 5.5) [147]. 

Ketones, in which one alkyl group R is sterically demanding, only give the trans-enolate on deprotonation with LDA at —12°C (W.A. Kleschick, 1977, see p. 60f.). Ketones also enolize regioseiectively towards the less substituted carbon, and stereoselectively to the trans-enolate, if the enolates are formed by a bulky base and trapped with dialkyl boron triflates, R2BOSO2CF3, at low temperatures (D A. Evans, 1979). Both types of trans-enolates can be applied in stereoselective aldol reactions (see p. 60f.). 

Stereoselectivities of 99% are also obtained by Mukaiyama type aldol reactions (cf. p. 58) of the titanium enolate of Masamune s chired a-silyloxy ketone with aldehydes. An excess of titanium reagent (s 2 mol) must be used to prevent interference by the lithium salt formed, when the titanium enolate is generated via the lithium enolate (C. Siegel, 1989). The mechanism and the stereochemistry are the same as with the boron enolate. 

Ideal starting materials for the preparation of. svn-aldols are ketones that can be readily deprotonated to give (Z)-enolates which are known to give predominantly yyu-adducts. Thus, when (5,)-1-(4-methylphenyl)sulfonyl-2-(l-oxopropyl)pyrrolidine is treated with dibutylboryl triflate in the presence of diisopropylethylamine, predominant generation of the corresponding (Z)-boron enolate occurs. The addition of this unpurified enolate to 2-methylpropanal displays not only simple diastereoselectivity, as indicated by a synjanti ratio of 91 9, but also high induced stereoselectivity, since the ratio of syn- a/.vyn-lb is >97 3. 

In contrast, highly stereoselective aldol reactions are feasible when the boron etiolates of the mandelic acid derived ketones (/ )- and (5,)-l- t,r -butyldimethylsiloxy-l-cyclohexyl-2-butanone react with aldehydes33. When these ketones are treated with dialkylboryl triflate, there is exclusive formation of the (Z)-enolates. Subsequent addition to aldehydes leads to the formation of the iyn-adducts whose ratio is 100 1 in optimized cases. 

The following C2-symmetric bis-sulfonamide is a more efficient controller of stereoselectivity in aldol additions. The incorporation of this ligand into the bromodiazaborolane, subsequent generation of the boron enolate derived from 3-pentanone, and addition to achiral aldehydes preferentially leads to the formation of ijn-adducts (synjanti 94 6 to >98 2) with 95-98% ee. Chemical yields of 85-95% are achieved51. 

S)-Tricarbonyl(2-methoxyacetophenone)chromium is a starting material which provides remarkable substrate-induced stereoselectivity. Thus, its conversion into a boron enolate and subsequent addition to aldehydes delivers the chromium complexes 7 and 8 with diastereomeric ratios of 92 8 to 95 559. 

Thus, jyn-adducts arise predominantly, as expected, according to the Zimmerman-Traxier model. Provided that either boron or zirconium is the enolate-metal atom, high syn selectivity is achieved. The total amount of anti-adducts is lower than 2% in the case of amides 1 and 2, and it approaches zero when the other reagents arc used94 . The induced stereoselectivities are impressive for the amides and remarkable in the case of the imides. 

An entry to. yyrt-2-methoxy-3-hydroxycarboxylic acids is also opened using similar methodology. Thus the norephedrine derived (4/ ,5S)-3-(2-methoxy-l-oxoethyl)-4-methyl-5-phenyl-1,3-oxazolidine-2-one 23105a, as well as the phenylalanine derived (4S)-4-benzyl-3-(2-methoxy-l-oxoethyl)-l,3-oxazolidin-2-one 25105b, can be added to aldehydes via the boron enolates to give, after oxidative workup, the adducts in a stereoselective manner (d.r. 96 4, main product/sum of all others). Subsequent methanolysis affords the methyl esters. 

Crystalline, diastereomerieally pure syn-aIdols are also available from chiral A-acylsultams. lhe outcome of the induction can be controlled by appropriate choice of the counterion in the cnolate boron enolates lead, almost exclusively, to one adduct 27 (d.r. >97 3, major adduct/ sum of all other diastereomers) whereas mediation of the addition by lithium or tin leads to the predominant formation of adducts 28. Unfortunately, the latter reaction is plagued by lower induced stereoselectivity (d.r. 66 34 to 88 12, defined as above). In both cases, however, diastereomerieally pure adducts are available by recrystallizing the crude adducts. Esters can be liberated by treatment of the adducts with lithium hydroxide/hydrogen peroxide, whereby the chiral auxiliary reagent can be recovered106. 

A somewhat tedious extension of this methodology, which guarantees good induced stereoselectivity, relies on the reversible introduction of an a-substituent which is removed after the aldol addition is performed. For this purpose, the corresponding derivative of (methyl-thio)acetic acid is converted into the boron enolate and subsequently reacted with aldehydes. The... 

The stereoselectivity is not significantly improved if boron enolates are used instead of lithium enolates. For example, the enantiomerically pure aldehyde (—)-(2S,4/ )-4-methoxycarbonyl-2-methylpentanal delivers the diastereomeric thioeslers in a ratio of 3 2 when treated with the indicated boron enolate29. 

If a chiral aldehyde, e.g., methyl (27 ,4S)-4-formyl-2-methylpentanoate (syn-1) is attacked by an achiral enolate (see Section 1.3.4.3.1.), the induced stereoselectivity is directed by the aldehyde ( inherent aldehyde selectivity ). Predictions of the stereochemical outcome are possible (at least for 1,2- and 1,3-induction) based on the Cram—Felkin Anh model or Cram s cyclic model (see Sections 1.3.4.3.1. and 1.3.4.3.2.). If, however, the enantiomerically pure aldehyde 1 is allowed to react with both enantiomers of the boron enolate l-rerr-butyldimethylsilyloxy-2-dibutylboranyloxy-1-cyclohexyl-2-butene (2), it must be expected that the diastereofacial selec-tivitics of the aldehyde and enolate will be consonant in one of the combinations ( matched pair 29), but will be dissonant in the other combination ( mismatched pair 29). This would lead to different ratios of the adducts 3a/3b and 4a/4b. 

Excellent stereoselectivity is attained with the optically active boron enolate 7, prepared from the corresponding A-acyloxazolidinone (see Appendix) and diethylboron trifluoromethanesul-fonate177. The reaction presumably proceeds via a transition state similar to 5. 

Geometrically defined a/ -epoxysilanes have been shown (6) to undergo a highly stereoselective rearrangement to silyl enol ethers (see also Chapter 15). This rearrangement is catalysed by boron trifluoride etherate, and seems to involved-opening of the epoxysilane, as shown ... 

Aldol Reactions of Boron Enolates. The matter of increasing stereoselectivity in the addition step can be addressed by using other reactants. One important version of the aldol reaction involves the use of boron enolates.15 A cyclic TS similar to that for lithium enolates is involved, and the same relationship exists between enolate configuration and product stereochemistry. In general, the stereoselectivity is higher than for lithium enolates. The O-B bond distances are shorter than for lithium enolates, and this leads to a more compact structure for the TS and magnifies the steric interactions that control stereoselectivity. 

The general trend is that boron enolates parallel lithium enolates in their stereoselectivity but show enhanced stereoselectivity. There also are some advantages in terms of access to both stereoisomeric enol derivatives. Another important characteristic of boron enolates is that they are not subject to internal chelation. The tetracoordinate dialkylboron in the cyclic TS is not able to accept additional ligands, so there is no tendency to form a chelated TS when the aldehyde or enolate carries a donor substituent. Table 2.2 gives some typical data for boron enolates and shows the strong correspondence between enolate configuration and product stereochemistry. 

If there is no other interaction, the reaction proceeds through an acyclic TS and steric factors determine the amount of syn versus anti addition. This is the case with BF3, where the tetracoordinate boron-aldehyde adduct does not offer any free coordination sites for formation of a cyclic TS. Stereoselectivity increases with the steric bulk of the silyl enol ether substituent R1.50... 

In general, BF3 -catalyzed Mukaiyama reactions lack a cyclic organization because of the maximum coordination of four for boron. In these circumstances, the reactions show a preference for the Felkin type of approach and exhibit a preference for syn stereoselectivity that is independent of silyl enol ether structure.119... 

Stereochemical Control Through Reaction Conditions. In the early 1990s it was found that the stereochemistry of reactions of boron enolates of N-acyloxazolidinones can be altered by using a Lewis acid complex of the aldehyde or an excess of the Lewis acid. These reactions are considered to take place through an open TS, with the stereoselectivity dependent on the steric demands of the Lewis acid. With various aldehydes, TiCl4 gave a syn isomer, whereas the reaction was... 

Camphor-derived sulfonamide can also permit control of enantioselectivity by use of additional Lewis acid. These chiral auxiliaries can be used under conditions in which either cyclic or noncyclic TSs are involved. This frequently allows control of the syn or anti stereoselectivity.143 The boron enolates give syn products, but inclusion of SnCl4 or TiCl4 gave excellent selectivity for anti products and high enantioselectivity for a range of aldehydes.145... 

---