Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Endo cycloadduct

Theoretical work by the groups directed by Sustmann and, very recently, Mattay attributes the preference for the formation of endo cycloadduct in solution to the polarity of the solvent Their calculations indicate that in the gas phase the exo transition state has a lower energy than the endo counterpart and it is only upon introduction of the solvent that this situation reverses, due to the difference in polarity of both transition states (Figure 1.2). Mattay" stresses the importance of the dienophile transoid-dsoid conformational equilibrium in determining the endo-exo selectivity. The transoid conformation is favoured in solution and is shown to lead to endo product, whereas the cisoid conformation, that is favoured in the gas phase, produces the exo adduct This view is in conflict with ab initio calculations by Houk, indicating an enhanced secondary orbital interaction in the cisoid endo transition state . [Pg.7]

Electron-deficient alkenes add stereospecifically to 4-hydroxy-THISs with formation of endo-cycloadducts. Only with methylvinyl-ketone considerable amounts of the exo isomer are produced (Scheme 8) (16). The adducts (6) may extrude hydrogen sulfide on heating with methoxide producing 2-pyridones. The base is unnecessary with fumaronitrile adducts. The alternative elimination of isocyanate Or sulfur may be controlled using 7 as the dipolarenOphile. The cycloaddition produces two products, 8a (R = H, R = COOMe) and 8b (R = COOMe, R =H) (Scheme 9) (17). Pyrolysis of 8b leads to extrusion of furan and isocyanate to give a thiophene. The alternative S-elimi-nation can be effected by oxidation of the adduct and subsequent pyrolysis. [Pg.5]

The complexation procedure included addition of an equimolar amount of R,R-DBFOX/Ph to a suspension of a metal salt in dichloromethane. A clear solution resulted after stirring for a few hours at room temperature, indicating that formation of the complex was complete. The resulting solution containing the catalyst complex was used to promote asymmetric Diels-Alder reactions between cyclopen-tadiene and 3-acryloyl-2-oxazolidinone. Both the catalytic activity of the catalysts and levels of chirality induction were evaluated on the basis of the enantio-selectivities observed for the endo cycloadduct. [Pg.251]

Effect of water additive was examined in the asymmetric Diels-Alder reactions catalyzed by the J ,J -DBF0X/Ph-Ni(C104)2 complex. After addition of an appropriate amount of water to the anhydrous complex A, the reaction with an excess amount of cyclopentadiene was performed at room temperature. Enantioselectivity was as high as 93% ee for the endo cycloadduct up to five equivalents of water added and the satisfactory level of 88% ee was maintained when 10 equivalents were added. However, enantioselectivity gradually decreased with the increased amounts of water added 83 and 55% ee from 15 and 50 equivalents, respectively (Scheme 7.11). When the reaction temperature went down to -40 °C, the enantioselectivity as high as 98% ee resulted up to 15 equivalents of water additive. The effect of methanol at room temperature was even more surprising. In the presence of 15 and 100 equivalents of methanol, high levels of enantioselectivities of 88% and 83% ee, respectively, were recorded for the reactions at room temperature. [Pg.259]

It is interesting that the use of excess ligand DBFOX/Ph led to a decreased en-antioselectivity for the endo cycloadduct, especially when the enantiomeric purity of the ligand was low. This phenomenon is closely related with the chirality enrichment mechanism operating in the solution. [Pg.264]

The parent five-membered nitronate having no substituent at the 3-position was too unstable to be isolated. However, 3-substituted derivatives were highly stabilized. Especially, the 3-ethyl derivatives having a terminal electron-withdrawing substituent are readily available by the dehydrochlorination of 3-chloro-l-nitropropane in the presence of electron-deficient alkenes. It was our delight that the reaction of 3-al-kyl-substituted five-membered nitronates was also successfully catalyzed by R,R-DBFOX/Ph-Ni(SbFg)2 complex to at room temperature. This reaction was highly endo-selective (cisjtrans= 91 9) and enantioselective for the endo cycloadduct (92% ee). [Pg.273]

When the bicyclic thiirene oxide 180164 is dissolved in excess furan, a single crystalline endo-cycloadduct (182) is formed stereospecifically (equation 71)164. This is the first propellane containing the thiirane oxide moiety. Clearly, the driving force for its formation is the release of the ring strain of the starting fused-ring system 180. In contrast, 18a did not react with furan even under forcing conditions. [Pg.429]

The cycloadditions of the C-2 vinyl glicals with maleic anhydride are an interesting example of facial stereocontrol. The allylic methoxy group in dienes 55a and 55b exerts an nnh -stereodirecting effect as shown by the stereochemistry of the endo-cycloadducts 56 and 57 obtained as the sole products from 55a and 55b, respectively, and by the fact that 55c produces [51] a mixture of the diastereoisomers 56c and 57c (Scheme 2.22). When linear acetylenic dienophiles were used, the degree of facial diastereoselectivity decreased, which indicates its dependence on steric effects. [Pg.49]

In intramolecular Diels-Alder reactions, two rings are formed in one step. The reaction has been used to synthesize a number of interesting ring systems.29 The intramolecular cyclization of ( )-l-nitrodeca-l,6,8-triene at 80 °C affords an endo cycloadduct with the tram ring fusion preferentially, as shown in Eq. 8.18. In contrast, (Z)-nitroalkenes produce a nearly 1 1 mixture of cis- and tra/w-fused cycloadducts.30... [Pg.239]

Catalyst 329, prepared from trimethylaluminum and 3,3/-bis(triphenylsily 1)-1,1 /-bi-2-naphthol, allowed the preparation of the endo cycloadduct (2S )-327 with 67% ee. The use of non-polar solvents raised the ee, but lowered the chemical yield213. Recently, it was reported that the reaction to form 327 exhibited autoinduction when mediated by catalyst 326214. This was attributed to a co-operative interaction of the cycloadduct with the catalyst, generating a more selective catalytic species. A wide variety of carbonyl ligands were tested for their co-operative effect on enantioselectivity. Sterically crowded aldehydes such as pivaldehyde provided the best results. Surprisingly, 1,3-dicarbonyl compounds were even more effective than monocarbonyl compounds. The asymmetric induction increased from 82 to 92% ee when di(l-adamantyl)-2,2-dimethylmalonate was added while at the same time the reaction temperature was allowed to increase by 80 °C, from -80 °C to 0°C. [Pg.407]

Helmchen and colleagues used equimolar amounts of L-valine derived oxazaboroli-dine 361a to catalyze the reaction of methacrolein with cyclopentadiene (equation 103). Cycloadduct 322 was obtained with 64% ee229. The enantioselectivity was increased to 86% ee by using 60 mol% of 361a and donor solvents like THF. The same catalyst afforded the endo cycloadduct of crotonaldehyde and cyclopentadiene with 76% ee. [Pg.412]

Immobilization of TADDOL-derivatives to silica and treatment with various tita-nium(IV) salts furnished a catalytic system (38) which was utilized in [2-1-3] cycloadditions of diphenylnitrone and acylated oxazolidinone to yield oxazolines (Scheme 4.23) [65]. It is noteworthy that the ligand X has an impact on the outcome of this cycloaddition. While the dichloro catalyst affords the exo-adduct in good yield and with a high stereoselectivity, the corresponding tosyloxy catalyst preferentially affords the endo-cycloadduct. The efficiency of the process is comparable to those obtained with the analogous soluble catalysts. The catalyst, however, had to be recycled prior to each experiment. [Pg.223]

In general, LiBr and NEt3 are employed in 1.5 and 1.2 equiv, respectively. Although the reaction becomes rather slower, catalytic amounts of LiBr/NEt3 (0.1 equiv each) are also sufficient. In reactions with the highly reactive dipolarophile N-methylmaleimide, the catalytic reaction results in a better yield. A similar lithiation is possible with a-substituted (alkylideneamino)acetates and (alkylideneamino)-acetamides to generate lithium enolates (86). Cycloadditions with a variety of a,(3-unsaturated carbonyl compounds leads to endo cycloadducts. However, the reaction with acrylonitrile is again nonstereoselective. [Pg.764]

Scheme 11.45 shows a proposal for the transition state involved in a related Lewis acid catalyzed cycloaddition where a disubstituted dipolarophile is used and endo/exo issues are examined. By coordination of the bulky titanium Lewis acid catalyst, the a-carbon of the acceptor becomes sterically more hindered, disfavoring exo-approach, which involves a serious steric interaction of the benzylidene phenyl moiety with the ligands on the titanium ion. Accordingly, the endo-cycloadduct is the only product observed. [Pg.796]

Reactions of the same carbonyl ylide intermediate with aldehydes are even more fruitful. The Rh2(OAc)2 catalyzed reaction proceeds at room temperature in the presence of 2 mol% of the catalyst, but the diastereoselectivity is disappointingly low (endo/exo = 49 51, Scheme 11.56). However, when 10 mol% of the cocatalyst Yb(OTf)3 is added, the reaction becomes highly exo-selective (endo/ exo = 3 97) (198). Suga has extended this Lewis acid catalyzed carbonyl ylide cycloaddition reaction to catalyzed asymmetric versions. The chiral cocatalyst employed is ytterbium(III) tris(5)-1,1 -binaphthyl-2,2 -diyl phosphonate, Yb[(S) BNP]3 (10 mol%). In the reaction of methyl o-(diazoacetyl)benzoate with benzyloxyacetaldehyde in the presence of Rh2(OAc)2 (2 mol%) at room temperature with the chiral Yb catalyst, the diastereoselectivity is low (endo/exo = 57 43) and the enantiopurity of the endo-cycloadduct is 52% ee. [Pg.805]

The 3-acyl-2(3F/)-oxazolones function as good dienophiles in cycloaddition reactions with cyclic 2,4-dienes such as cyclopentadienes and anthracenes. Thus, the thermal reaction of 3-acetyl-2(37/)-oxazolone with cyclopentadiene and the hexachloro and hexamethyl derivatives gives endo-cycloadducts exclusively. In particular, the chiral cycloadducts 221 and 223 derived from the diastereoselective Diels-Alder reactions of 3-(2-exo-alkoxy-l-apocamphanecarbonyl)-2(3/7)-oxazo-lones with hexamethylcyclopentadiene and 9,10-dimethylanthracene, respectively, are highly useful as chiral 2-oxazolidinone auxiliaries. The conformationally rigid roofed structures play a crucial role in affording excellent chiral induction (Fig. 5.54). [Pg.32]

Novel [4+2] cycloadditions of 1-phenyl-1-benzothiophenium triflate salt 89 with dienophiles (cyclopentadiene and 1,3-diphenylbenzofuran) have been reported <990L257>. Heating 89 and cyclopentadiene in CHjClj gave a single product, endo cycloadduct 90. The stereochemistry of 90 was confirmed by single-crystal X-ray analysis. The cycloaddition of 3-methyl-l-phenyl-benzothiophenium triflate salt with cyclopentadiene proceeded only in low yield and required much more rigorous reaction conditions (CHjCN, sealed tube. A). [Pg.100]

Methylenecyclopropane (16), however, does give a [2 + 2] cycloadduct with norbornadiene (15).5 The addition of triphenylphosphane as a cocatalyst affects both the stereo- and periselec-tivity of the reaction. In the presence of triphenylphosphane a very good yield of the endo-cycloadduct 17 is formed. In the absence of triphenylphosphane both endo- and e.vo-products, as well as a homo [4 + 2] cycloadduct, are formed. [Pg.142]


See other pages where Endo cycloadduct is mentioned: [Pg.11]    [Pg.271]    [Pg.252]    [Pg.253]    [Pg.255]    [Pg.260]    [Pg.261]    [Pg.262]    [Pg.263]    [Pg.265]    [Pg.267]    [Pg.269]    [Pg.269]    [Pg.271]    [Pg.95]    [Pg.119]    [Pg.195]    [Pg.446]    [Pg.30]    [Pg.355]    [Pg.359]    [Pg.22]    [Pg.332]    [Pg.221]    [Pg.761]    [Pg.763]    [Pg.766]    [Pg.767]    [Pg.796]    [Pg.608]    [Pg.610]   
See also in sourсe #XX -- [ Pg.297 , Pg.298 ]




SEARCH



Cycloadducts

© 2024 chempedia.info