Embedded design

Step 1. Postulate a representation of alternatives whose embedded designs are candidates for a feasible and optimal system. 

The maps of current densities and reaction rates for the embedded design are shown in Fig. 23 (at the same mean current density through the cell of 0.2 A cm-2). It is seen that the distribution of current... 

Two categories of fasteners suitable for enhanced disassembly can be distinguished according to their generic applicability, namely, Disassembly Embedded Design and Active Disassembly. 

For the Disassembly Embedded Design category, product-specific separation features are embedded in the product structure during manufacturing, which require individual physical contact of a disassembly tool with the fastener (one-to-one) to initiate the disassembly process (Fig. 3). 

Companies have their own legacy and embedded design improvement processes and tend to resist the implementation of new optimization systems. 

ACI 349.2R-07, Guide to the Concrete Capacity Design (CCD) Method -Embedment Design Examples, American Concrete Institute Farmington Hills, MI. 

The design of smart materials and adaptive stmctures has required the development of constitutive equations that describe the temperature, stress, strain, and percentage of martensite volume transformation of a shape-memory alloy. These equations can be integrated with similar constitutive equations for composite materials to make possible the quantitative design of stmctures having embedded sensors and actuators for vibration control. The constitutive equations for one-dimensional systems as well as a three-dimensional representation have been developed (7). 

Typical metal design temperatures for these finned-tube constructions are 399°C (750°F) embedded, 288°C (550°F) integral, 232°C (450°F) overlapped footed, and 177°C (350°F) footed. 

A team-based applieation and systematie approaeh is essential as there are many subjeetive proeesses embedded, but many eompanies have found them to be pivotal teehniques in designing eost-effeetive and eompetitive produets (Miles and Swift, 1998). 

This design has a number of tubes embedded inside the turbine blade to provide channels for the water (Figure 9-23). In most cases, these tubes are constructed from copper for good heat-transfer conditions. The water, which is converted to steam by the time it reaches the blade tips, is then... 

Brown, Marty, Laying Out PC Boards for Embedded Switching Supplies, Electronic Design, December 6, 1999. 

---