Elimination reactions cyclohexa-1,4-diene

In fl-trimethylsilylcarboxylic acids the non-Kolbe electrolysis is favored as the carbocation is stabilized by the p-effect of the silyl group. Attack of methanol at the silyl group subsequently leads in a regioselective elimination to the double bond (Eq. 29) [307, 308]. This reaction has been used for the construction of 1,4-cyclohexa-dienes. At first Diels-Alder adducts are prepared from dienes and P-trimethylsilyl-acrylic acid as acetylene-equivalent, this is then followed by decarboxylation-desilyl-ation (Eq. 30) [308]. Some examples are summarized in Table 11, Nos. 12-13. 

Fission of the ring of cyclohexa-1,4-diene carboxylate (or possibly also the cyclohex-1-enecarboxylate) by a series of hydroxylation, and reductive and elimination reactions to produce 3-hydroxyp-imelate (or pimelate) that then enters the metabolic system. 

Generally, oxepins have a tendency to contract to a six-membered carbocycle when treated with acid. The driving force is the aromaticity of the phenol formed. However, when the less stable cyclohexa-2,5-diene-1,4-diol with an appropriate substitution pattern is treated with acid, the oxepin system is obtained. The treatment of cyclohexadienediols that are substituted with tert-butyl groups in the 2- and 6-positions and aryl at Cl and C4 with trifluoroacetic acid produces oxepins 1 with elimination of water.186 187 This reaction, however, is restricted to certain aryl substituents with at least some electron-donating effect. Generally, cyclohexa-2,4-dienone derivatives 2 are formed.187,188... 

When the hydride ion of lithium alanate is used as nucleophile, cyclohexa-2,4-dien-l-ol is obtained as a labile addition product which eliminates water on standing to give benzene.12 The reaction of an oxepin derivative that possesses a hexamethylene bridge across C3-C6 with sodium methoxide gives an addition product 5 in which the seven-membered heterocyclic system is retained.213 214... 

In 1992/1994, Grubbs et al. [29] and MacDiarmid et al. [30] described an improved precursor route to high molecular weight, structurally regular PPP 1, by transition metal-catalyzed polymerization, of the cyclohexa-1,3-diene derivative 14 to a stereoregular precursor polymer 16. The final step of the reaction sequence is the thermal, acid-catalyzed elimination of acetic acid, to convert 16 into PPP 1. They obtained unsupported PPP films of a definite structure, which were, however, badly contaminated with large amounts of polyphosphoric acid. 

The reaction of 77 with alkynes has further been elaborated for the synthesis of substituted phthalonitriles 81. An alternative for the synthesis of these compounds is the cycloaddition reaction of 77 with enamines followed by a retro-Diels-Alder loss of N2 and elimination of the amine (Scheme 16). Generally, more forcing reaction conditions are required and lower yields are obtained in reactions with alkynes than in reactions with enamines, for example, 4-ethyl-5-methylphthalonitrile is obtained in 51% yield from 2-pentyne (xylene, 150°C, 18 days) and in 73% yield from 4-(l-ethylprop-l-en-l-yl)morpholine (CHCI3, 70°C, 7 days) <1998T1809>. The mechanism of the reaction with enamines has been studied in detail. This revealed a [1,5] sigmatropic rearrangement in the cyclohexa-2,4-dien-1-amine intermediates formed after the loss of N2 <1998T10851>. 

The hydromethylenation reaction of maleimide may be explained by initial formation of the expected adduct followed by aromatization of the cyclohexa-1,3-diene ring (driving force of this reaction) and 1,2-hydrogen transfer (key step) followed by final elimination of pyridine. The same mechanism probably occurs with open-chain dipolarophiles. 

Transformation of the chloroacetate from cyclohexa-1,3-diene to amide 72 followed by a Pd(0)-catalyzed reaction afforded products 73 [89] and 74 (Scheme 8-25) [90]. Product formation is dependent on the substitution pattern. Both reactions proceed via a similar intermediate. When = Me and = H, jS-elimination cannot occur and a cyclization takes place instead, via insertion of the double bond into the intermediate palladium-carbon bond. 

The double elimination of 1,1-dichlorocyclopropanes with potassium tert-butoxide to give cycloproparenes is an important variant of the reaction discussed in Section 5.2.2.1.2.3. When a six-membered ring fused to the cyclopropane contains a double bond, the elimination is accompanied by isomerization of the new double bonds to give an aromatic ring (Table 7). The reaction is illustrated by the synthesis of bicyclo[4.1.0]hepta-l,3,5-triene (l//-cyclo-propabenzene, 3) in two steps from cyclohexa-1,4-diene (1), the first step being dichlorocarbene addition to the diene to give 7,7-dichlorobicyclo[4.1.0]hept-3-ene... 

Transfer hydrogenation of aromatic nitro compounds. Aromatic nitro compounds are reduced to anilines when refluxed in excess cyclohexene in the presence of ordinary commerical 10% Pd/C catalyst. The method is very useful for selective reduction of polynitrobenzenes. Halogen, if present, is eliminated. Cyclohexene is superior to cyclohexa-1,3-diene as hydrogen donor. The reaction is usually successful, but slower, with sulfur-containing substrates. 4-Methoxy-2,5-dinitroanisole is reduced to 2,5-dimethoxy-4-nitroaniline in 10 min. in the steam bath under these conditions. 

Bottini s group has investigated the reactions of 1-halogenocyclohexenes with potassium t-butoxide. From 1-chloro-, 1-bromo-, or 1-iodo-cyclohexene and Bu OK in either Bu OH or DMSO a yield of 4—12% of 1-t-butoxy-cyclohexene is obtained this product was rapidly converted into cyclohexanone on treatment with acid. Labelling experiments lead to the conclusion that 1-t-butoxycyclohexene is formed with concurrent operation of elimination addition mechanisms involving cyclohexa-1,2-diene and cyclohexyne. A number of C 2 hydrocarbons are also formed, arising from cyclohexa-1,2-diene via dimerization and 1,2- and 1,4-cycloaddition of cyclohexa-1,3-diene. 

---