Elimination reactions alkynes from

The proposed reaction mechanism (Scheme 7-2) comprises (1) oxidative addition of ArSH to RhCl(PPh3)3 to give Rh(H)(Cl)(SPh)(PPli3)n, (2) coordination ofalkyne to the Rh complex, (3) ris-insertion of alkyne into the Rh-H bond with Rh positioned at terminal carbon and H at internal carbon, (4) reductive elimination of 16 from the Rh(III) complex to regenerate the Rh(I) complex. 

In a reaction similar to the (>-alkoxide elimination reactions seen with zir-conocenes, catalytic Rh(OH)(cod)2 and 2 eq. of arylboronic acids gave cyclic products 165 from enynes 166 (Scheme 35) [100]. In this reaction, transmet-allation of Rh - OR with B - Ph gave Rh - Ph species 167, which inserted into the alkyne, cyclized to 168, and finally underwent [>-alkoxidc elimination to provide Rh-OCH3. This reaction is limited to the formation of five-membered rings, but it can also undergo cascade type reactions of enediynes to give multicyclic products [100]. 

Based on the extraordinary selectivity in hydrosilylation reactions when an alkyne competes with other groups for a silicon-bonded active hydrogen, further derivatisation can be carried out. The hydrosilylation of 2-methyl-3-butynol, which works very well with polymeric siloxanes, gives hydroxyal-kenylsilicon compounds - a l-silylalkenyl/2-silylalkenyl mixture from cis-addition across the triple bond. Elimination of water from the tert. alcohol produced, catalyzed by traces of a strong acid, results in isoprenylic siloxanes in more than 90 % overall yield (Eq. 8). 

Table 9.1). The rate of dehydrobromination from the intermediate bromoalkenes follows the pattern 2-bromoalkenes > Z-l-bromoalkenes > E- -bromoalkenes the corresponding chloro derivatives react more slowly. For optimum yield, the reaction temperature should be <100°C to reduce decomposition of the catalyst, and the concentration of base should be kept low to prevent isomerization of the resulting alkynes. [3-Elimination of HBr from 1,2-dibromo-1 -phenylethane can be controlled to yield 1-bromo-l-phenylethene in 83% yield [15]. The addition of alcohols and diols have a co-catalytic effect on the elimination reaction, as the alkoxide anions are transferred more effectively than the hydroxide ions into the organic phase [13]. 

The proposed mechanism involves the formation of ruthenium vinylidene 97 from an active ruthenium complex and alkyne, which upon nucleophilic attack of acetic acid at the ruthenium vinylidene carbon affords the vinylruthenium species 98. A subsequent intramolecular aldol condensation gives acylruthenium hydride 99, which is expected to give the observed cyclopentene products through a sequential decarbonylation and reductive elimination reactions. 

I-Alkynes from methyl ketones This reaction can be effected by conversion to Ihe enol phosphate followed by -elimination with LDA (equation I). In the case of a simple ketone such as 2-octanone the yield is low because of formation also of an allene. In such cases lithium tetramethylpiperidide is recommended as base. 

Consideration of the oxidation level reveals diat while one carbon is reduced (the one to which hydrogen adds), die other is oxidized (die one to which the oxygen adds). There is no net change in oxidation level of the alkene functional group. Likewise die reverse processes of these addition reactions, namely, elimination of HX from alkyl halides and dehydration of alcohols to give alkenes, are not redox processes. Additions of water to alkynes is analogous. In this case, however, the product is a ketone, the oxidation level of the ketone is seen to be the same as the alkyne, and so no net change in oxidation level has occurred. 

In this case a reaction sequence involving reductive elimination of H2 from Complex XV followed by insertion of alkyne into the remaining Pt-H bond, addition of alkyne to the Pt-Pt bond of the proposed diplatinum(I) intermediate, and then abstraction of chloride from the solvent is probable. Work is in progress to isolate and characterize proposed intermediates in this sequence, as well as to study the reactions in nonchlorinated solvents. 

The addition of dihalocarbenes to alkynes is again a rather inefficient process and usually leads, to the isolation of the cyclopropenone rather than the 3,3-dichlorocyclo-propene. In a rather unusual example, however, 2-butyne is reported to be converted to (67). This product is apparently derived by addition of dichlorocarbene to the corresponding methylenecyclopropene, derived in turn by elimination of HC1 from the primary adduct (68). The cyclopropene (67) does not appear to ring open to a vinylcarbene, but can be trapped in Diels-Alder reactions with cyclopentadiene 60). A related addition of dichlorocarbene to ethyl 2-butynoate also leads to a low yield of the 3,3-dichlorocyclopropene, which may be hydrolysed to the cyclopropenone 6l). 

Chapter 8 begins the treatment of organic reactions with a discussion of nucleophilic substitution reactions. Elimination reactions are treated separately in Chapter 9 to make each chapter more manageable. Chapter 10 discusses synthetic uses of substitution and elimination reactions and introduces retrosynthetic analysis. Although this chapter contains many reactions, students have learned to identify the electrophile, leaving group, and nucleophile or base from Chapters 8 and 9. so they do not have to rely as much on memorization. Chapter 11 covers electrophilic additions to alkenes and alkynes. The behavior of carbocations, presented in Chapter 8, is very useful here. An additional section on synthesis has been added to this chapter as well. 

Introduction 392 9-2 Nomenclature of Alkynes 393 9-3 Physical Properties of Alkynes 394 9-4 Commercial Importance of Alkynes 395 9-5 Electronic Structure of Alkynes 396 9-6 Acidity of Alkynes Formation of Acetylide Ions 397 9-7 Synthesis of Alkynes from Acetylides 399 9-8 Synthesis of Alkynes by Elimination Reactions 403 Summary Syntheses of Alkynes 404 9-9 Addition Reactions of Alkynes 405... 

Vinyl bromides can themselves be made by elimination reactions of 1,2-dibromoalkanes. Watch what happens when 1,2-dibromopropane is treated with three equivalents of K NLi first, elimination to the vinyl halide then, elimination of the vinyl halide to the alkyne. The terminal alkyne is amply acidic enough to be deprotonated by R2NU, and this is the role of the third equivalent. Overall, the reaction makes a lithiated alkyne (ready for further reactions) from a fully saturated starting material. This may well be the first reaction you have met that makes an alkyne from a starling material that doesn t already contain a triple bond, making an alkyne from 1,2-dibromopropane... 

Alkenes may be prepared by elimination reactions with a regio-chemistry (Hofmann or SaytzefO that depends on the structure of the substrate and the reaction conditions. Alkenes may also be obtained from carbonyl compounds by the Witlig reaction and by the hydrogenation of alkynes. 

Functionalized alkynes are made via rDA cycloreversion of cycloadducts that act as protected alkynes. Substituted alkynes (93a-h) are obtained from adducts (92a-h) via FVP-induced rDA cycloreversion as shown in equation (40). This method, based on the rDA reaction, provides an alternative route to the alkynic bond, which is more commonly formed via elimination reactions. 

Alkynes are prepared by elimination reactions, as discussed in Section 8.10. A strong base removes two equivalents of HX from a vicinal or geminal dihalide to yield an alkyne by two... 

In the case of the attacks of neutral molecules on alkynes, nucleophilic attack is often difficult to distinguish from molecular cycloaddition or electrophilic initiation. Reaction (7) is typical of many which could equally as well be formulated as beginning with a dipolar cycloaddition or an acyclic zwitterion Detailed mechanism of these cycloaddition-elimination reactions remains to be explored... 3 . 

Starting from (+)-diethyl tartrate (2), bromobutenolide 18 was obtained in nine steps. Three of the four C=C double bonds were built up using a Wittig reaction (11—>12), an Ando- y Q Horner-Wadsworth-Emmons reaction (13— 15) and (3-elimination (16 18). From (-)-actinol (3) stannane 23 and sulfone 24 were synthesized in 9 and 13 steps, respectively. Their common intermediate, alkyne 22, was synthesized using methoxycarbonylation. Sharpless asymmetric epoxidation and Ci-elongation with lithio trimethylsilyldiazomethane. Stannane 23 was obtained upon hydrostannylation and TBS deprotection. Sulfone 24 was obtained after addition to methyl tetrolate, reduction, Mukaiyama redox condensation, acetylation and catalytic oxidation. 

Alkynes and functionally substituted alkynes may be synthesized either from starting materials that do not already contain the triple bond by elimination reactions, or the ethynyl and alkynyl groups may be introduced onto substrates by nucleophilic or electrophilic substitution reactions. 

Addition reactions Another type of organic reaction appears to be an elimination reaction in reverse. An addition reaction results when other atoms bond to each of two atoms bonded by double or triple covalent bonds. Addition reactions typically involve double-bonded carbon atoms in alkenes or triple-bonded carbon atoms in alkynes. Addition reactions occur because double and triple bonds have a rich concentration of electrons. Therefore, molecules and ions that attract electrons tend to form bonds that use some of the electrons from the multiple bonds. The most... 

---