Elevation drawings

This may be seen more clearly in the elevation drawing shown in Fig. 8-9. We assume that the surfaces are diffuse, i.e., that the intensity of the radiation is the same in all directions. The intensity is the radiation emitted per unit area and per unit of solid angle in a certain specified direction. So, in order to obtain the energy emitted by the element of area dA, in a certain direction, we must multiply the intensity by the projection of dA, in the specified direction. Thus the energy leaving dA, in the direction given by the angle , is... 

Plot plan or equipment and main piping layout and pertinent elevation drawings, including surface drainage arrangements. ... 

As a final check, operating instructions are prepared and checked out on the model arrangement to pick up any flaws in equipment functioning. Over-all plan and elevation drawings can then be made with the aid of the model, followed by individual specifications for each individually assigned unit. 

At the end of the year a complete report should be turned in which includes all calculations, flow sheets, material and energy balances, equipment specifications, preconstruction cost estimation figures, and economic evaluations. A carefully executed series of drawings, including plot plans, equipment layout, and elevation drawings may also be submitted if time permits. 

Why are elevation drawings often the most helpful to clients ... 

Elevation drawings—documents vertical projections of buildings and structures or profiles of equipment... 

Reactor coolant system plan and elevation drawings are provided as Figures 5.1.3-1 and 5.1.3-2. 

Major components of the RCS are usually surrounded by concrete structures, which provide support plus shielding and missile protection. Elevation drawings, illustrating principal dimensions of the RCS in relationship to the surrounding building structures, are presented in the figures of Section 1.2. i... 

Elevation drawings—graphical representations showing the location of process equipment in relation to existing structures and ground level. 

Equipment location drawings show the exact floor plan location of equipment in relationship to the plant s physical boundaries. Figure 7-23 illustrates this layout. Location drawings provide benefits similar to those of elevation drawings. The entire P ID provides a three-dimensional look at the unit. 

Piping engineers will develop plant layout and elevation drawings. 

A.601. This chapter of the SAR shall provide a description of the reactor coolant systems which transfer the heat from the reactor to the ultimate heat sink. The description shall contain the main design and performance characteristics. It shall be supported by schematic flow diagrams and an elevation drawing of the coolant... 

---