Electromechanical delay devices

Piezoelectric filter A kind of electromechanical device in which electrical signals are converted to a mechanical wave by using a piezoelectric crystal. Thus, the former electric wave is delayed as it propagates across the crystal, and this delay is used to reinforce a desired frequency bandwidth with very high Q values. The quartz crystal is an example of the piezoelectric elements used for these filters [i],... 

ZnO is a wide band gap semiconductor, which is used for various applications. Based on textured ZnO films one can build highly effective piezo field emitters. On the other hand ZnO is a very effective electron-excited phosphor. ZnO films easily withstand electron fluence more than 1 W/cm. ZnO films doped with Al, Ga, or In have a low resistivity of about 10 " Qcm and a high transparency of about 90%. This is sufficient for applications as a front contact in solar cells, liquid crystal displays etc. Dielectric ZnO films have a high electromechanical coupling factor that allow using ZnO in various surface acoustic wave (SAW) devices such as delay lines, delay-line filters, resonators, transducers and SAW convolvers. 

The performance of oscillators depends essentially on the stabihty of the acoustic device [7-9] no matter if working as electromechanical resonator or delay line. Because of its extraordinary importance we will concentrate further on resonators, namely quartz crystal resonators. However, the analysis is descriptive also for other piezoelectric materials and partly for delay line elements as well. 

---