Electromagnetic interference shields

Ethylene-vinyl acetate Fetterman [37] reinforced compounded ethylene-vinyl acetate (EVA) copolymer by using short hbers and found that silane coupling agents were effective at establishing improved hber-matrix adhesion. Das et al. [38] prepared carbon fiber-filled conductive composites based on EVA and studied the electromagnetic interference shielding effectiveness of the composites. [Pg.354]

The MWCNT-filled polystyrene composites have good electromagnetic interference shielding properties (Snow and Perkins, 2005). The shielding effectiveness of MWCNT-filled composites was frequency independent, and increased with the... [Pg.198]

Yang YL, Gupta MC (2005). Novel carbon nanotube-polystyrene foam composites for electromagnetic interference shielding. Nano Lett. 5 2131-2134. [Pg.222]

Electromagnetic interference shielding effectiveness of about 18 dB was achieved with 10 vol% MWCNT-PMMA film which was found to be primarily an EMI absorbing composite material. Figure 7.15 shows the variation of EMI shielding effectiveness due to reflection... [Pg.201]

Electromagnetic Interference Shielding, Electromagnetic Radiation Absorption, and Joining of Plastics... [Pg.361]

Blends of intrinsically conductive polymers (ICP s) with conventional thermoplastics offered a practical means of processing ICP s without sacrificing conductivity [KuUcarni, et al., 1991]. One of the major use for these blends was electromagnetic interference shielding. [Pg.972]

FEL 06] Feller J.F., Roth S., Bourmaud A., Conductive polymer composites electrical, thermal, and rheological study of injected isotactic poly(propylene)/long stainless-steel fibers for electromagnetic interferences shielding . Journal of Applied Polymer Science, vol. 100, pp. 3280-3287,2006. [Pg.241]

Y. Niu, Electromagnetic interference shielding with polyaniline nanofibers composite coatings, Polym. Eng. Sci., 48, 355-359 (2008). [Pg.80]

Polypyrrole Apolymer of pyrrole, afive-membered heterocyclic substance with one nitrogen and four carbon atoms and with two double bonds. The polymer can be prepared via electrochemical polymerization. Polymers thus prepared are doped by electrolyte anion and are electrically conductive. Polypyrrole is used in lightweight secondary batteries, as electromagnetic interference shielding, anodic coatings, photoconductors, solar cells, and transistors. [Pg.206]

K.H. Wong, S.J. Pickering, C.D. Rudd, Recycled carbon fibre reinforced polymer composite for electromagnetic interference shielding. Compos. A 41, 693-702 (2010)... [Pg.178]

Y. Wang, X. Jing, Intrinsically Conducting Polymers for Electromagnetic Interference Shielding. Polym. Adv. Technol. 2005,16,344-351. [Pg.88]

P. Saini, V. Choudhary, Enhanced Electromagnetic Interference Shielding Effectiveness of Polyaniline Functionalized Carbon Nanotubes Filled Polystyrene Composites. J. Nanopart. Res. 2013,15. [Pg.88]

P. Salni, V. Choudhary, Structural Details, Electrical Properties, and Electromagnetic Interference Shielding Response of Processable Copolymers of Aniline. /. Mater. Sci. 2013,48,797-804. [Pg.97]