Electrochemical corrosion growth

Cathodic protection of an uncoated ship is practically not possible or is uneconomic due to the protection current requirement and current distribution. In addition, there must be an electrically insulating layer between the steel wall and the antifouling coating in order to stifle the electrochemical reduction of toxic metal compounds. Products of cathodic electrolysis cannot prevent marine growths. On the contrary, in free corrosion, growths on inert copper can occur if cathodic protection is applied [23]. 

All plastics are permeable to moisture, and this can lead to failures caused by (i) electrochemical corrosion of aluminium metallisation (ii) dendritic growths between gold metallisation tracks and (iii) the corrosion of gold if suitable complexing agents are present. The rate of degradation is affected by many factors but two of the most important are the amount of ionic contamination which can be leached from the plastic and the quality of the passivation layer which is now present on the surface of all ICs. 

Key words nanocrystalline materials, electrochemical corrosion, passivation, semiconductive properties, pit initiation and growth. 

To discover the effective potential ranges for electrochemical protection, the dependence of the relevant corrosion quantities on the potential is ascertained in the laboratory. These include not only weight loss, but also the number and depth of pits, the penetration rate in selective corrosion, and service life as well as crack growth rate in mechanically stressed specimens, etc. Section 2.4 contains a summarized survey of the potential ranges for different systems and types of corrosion. Four groups can be distinguished ... 

Pitting corrosion always remains a worthy subject for study, particularly with reference to mechanism, and the problem conveniently divides into aspects of initiation and growth. For 6061 alloy in synthetic seawater, given sufficient time, pit initiation and growth will occur at potentials at or slightly above the repassivition potential . In an electrochemical study, it was found that chloride ions attack the passive layer as a chemical reaction partner so that the initiation process becomes one of cooperative chemical and electrochemical effects . 

The second chapter is by Aogaki and includes a review of nonequilibrium fluctuations in corrosion processes. Aogaki begins by stating that metal corrosion is not a single electrode reaction, but a complex reaction composed of the oxidation of metal atoms and the reduction of oxidants. He provides an example in the dissolution of iron in an acidic solution. He follows this with a discussion of electrochemical theories on corrosion and the different techniques involved in these theories. He proceeds to discuss nonequilibrium fluctuations and concludes that we can again point out that the reactivity in corrosion is determined, not by its distance from the reaction equilibrium but by the growth processes of the nonequilibrium fluctuations. ... 

Manganese and iron oxidation are coupled to cell growth and metabolism of organic carbon. Microbially deposited manganese oxide on stainless and mild steel alters electrochemical properties related to the potential for corrosion. Iron-oxidizing bacteria produce tubercles of iron oxides and hydroxides, creating oxygen-concentration cells that initiate a series of events that individually or collectively are very corrosive. 

---