Electrical charge properties

Heisenberg-type descriptions for two observers, 667, 668 Heitler, W., 723 Helicity operator, 529 Hermitian operator, 393 Hermitian operator Q describing electric charge properties of particles, 513... 

In his phenomenological study [1], Briick ordered a number of polymers in a row describing their affinity to become positively or negatively charged when rubbed with each other. Briick s row and other comparable rows first demonstrated the fundamental relationship between the chemical structure of a polymer and its tribo-electrical charging properties. In a former work [2] we followed that idea and showed that the tribo-electrical charging of two polymer species charged in a fluidized bed clearly depends on the affinity of the polymer surface to take up electron... 

Two parallel plates of conducting material separated by an insulation material, called the dielectric, constitutes an electrical condenser. The two plates may be electrically charged by connecting them to a source of direct current potential. The amount of electrical energy that can be stored in this manner is called the capacitance of the condenser, and is a function of the voltage, area of the plates, thickness of the dielectric, and the characteristic property of the dielectric material called dielectric constant. 

It is not certain whether Sir Humphrey Davy (Fig. 1-7) knew of these considerations. He accepted a commission from the Admiralty for the protection of copper-clad wooden ships, which had been introduced in 1761. During his numerous laboratory experiments, he discovered the cathodic protection of copper by zinc or iron [3]. Davy had already put forward the hypothesis in 1812 that chemical and electrical changes are identical or at least arise from the same material property. He believed that chemical reaction forces could be reduced or increased by altering the electric state of the material. Materials can combine only if they have different electric charges. If an originally positive material can be artificially negatively... 

Dry aerosols, or particulate matter, differ so much from the carrying gas stream that their removal should present no major difficulties. The aerosol is different physically, chemically, and electrically. It has vastly different inertial properties than the carrying gas stream and can be subjected to an electric charge. It may be soluble in a specific liquid. With such a variety of removal mechanisms that can be applied, it is not surprising that particulate matter, such as mineral dust, can be removed by a filter, wet scrubber, or electrostatic precipitator with equally satisfactory results. 

Electrostatic The properties of electrically charged bodies, and the resulting associated electrical phenomena that occur in the immediate vicinity of these materials. 

Cells contain thousands of different proteins. A major problem for protein chemists is to purify a chosen protein so that they can study its specific properties in the absence of other proteins. Proteins have been separated and purified on the basis of their two prominent physical properties size and electrical charge. A more direct approach is to employ affinity purification strategies that take advantage of the biological function or similar specific recognition properties of a protein (see Table 5.5 and Chapter Appendix). 

The amorphous orientation is considered a very important parameter of the microstructure of the fiber. It has a quantitative and qualitative effect on the fiber de-formability when mechanical forces are involved. It significantly influences the fatigue strength and sorptive properties (water, dyes), as well as transport phenomena inside the fiber (migration of electric charge carriers, diffusion of liquid). The importance of the amorphous phase makes its quantification essential. Indirect and direct methods currently are used for the quantitative assessment of the amorphous phase. 

A distinguishing property of ionic solutions is electrical conductivity, just as it is a distinguishing property for metals, but the current-carrying mechanism differs. Electric charge moves through a metal wire, we believe, by means of... 

Chemists also need to know the distribution of electric charge in a molecule, because that distribution affects its physical and chemical properties. To do so, they sometimes use an electrostatic potential surface (an elpot surface), in which the net electric potential is calculated at each point of the density isosurface and depicted by different colors, as in Fig. C.2f. A blue tint at a point indicates that the positive potential at that point due to the positively charged nuclei outweighs the negative potential due to the negatively charged electrons a red tint indicates the opposite. 

The newest addition to the forms of elemental carbon is the nanotube. A carbon nanotube is a long cylinder of carbon atoms, connected together in much the same way as in a fullerene. Both the diameter and the length of carbon nano-tubes can vary. Properties of nanotubes, such as their ability to conduct electrical charge, change dramatically with the dimensions of the tube. Carbon nanotubes are under intensive study. For example, a carbon nanotube laid down on a silicon chip forms a molecular transistor. Such devices may eventually lead to further miniaturization of the chips that are at the heart of modem computers. 

---