Effluents fluid catalytic cracking

Description The DCC process overcame the limitations of conventional fluid catalytic cracking (FCC) processes. The propylene yield of DCC is 3-5 times that of conventional FCC processes. The processing scheme of DCC is similar to that of a conventional FCC unit consisting of reaction-regeneration, fractionation and gas concentration sections. The feedstock, dispersed with steam, is fed to the system and contacted with the hot regenerated catalyst either in a riser-plus fluidized dense-bed reactor (for DCC-I) or in a riser reactor (for DCC-II). The feed is catalytically cracked. Reactor effluent proceeds to the fractionation and gas concentration sections for stream separation and further recovery. The coke-deposited catalyst is stripped with steam and transferred to a regenerator where air is introduced and coke on the catalyst is removed by combustion. The hot regenerated catalyst is returned to the reactor at a controlled circulation rate to achieve the heat balance for the system. 

IFP Process for 1-Butene from Ethylene. 1-Butene is widely used as a comonomer in the production of polyethylene, accounting for over 107,000 t in 1992 and 40% of the total comonomer used. About 60% of the 1-butene produced comes from steam cracking and fluid catalytic cracker effluents (10). This 1-butene is typically produced from by-product raffinate from methyl tert-huty ether production. The recovery of 1-butene from these streams is typically expensive and requires the use of large plants to be economical. Institut Francais du Petrole (IFP) has developed and patented the Alphabutol process which produces 1-butene by selectively dimerizing ethylene. 

---