Dispersion adhesive technology

A. 2 ettl, Modification of acrylic dispersions, in Hatulbotdt of Pressure Sensitive Adhesive Technology, 2nd edn, D. Satas (ed.). Van Nostrand Rdnhtdd. New Ytnk, 1989. Ch. 16... 

Research is now strongly centred on prodncing primers with low volatile organic contents, by using water as the primary solvent or dispersion medium or actual water-based primers where the organic solvent content is zero. For similar reasons of Environment and the impact of adhesive technology, a move to non-chromate systems is also under way. 

Floors of any type are placed almost exclusively by bonding technology. Therefore, solvent contact adhesives, dispersion adhesives, and pressure-sensitive adhesives are widely used for this application. For bonding parquet, the following types of adhesives are mainly used... 

In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. Polymer particles are prepared extensively as synthetic emulsions and latexes, which are applied as binders in the industrial fields of paint, paper and inks, and films such as adhesives and coating materials. Considerable attention has recently been directed towards aqueous dispersed systems due to the increased awareness of environmental issues. Moreover, such polymer particles have already been applied to more advanced fields such as bio-, information, and electronic technologies. In addition to the obvious commercial importance of these techniques, it is of fundamental scientific interest to completely elucidate the mechanistic details of macromolecule synthesis in the microreactors that the polymer particles in these heterogeneous systems constitute. 

Starch, often in its degraded form dextrin, and starch esters have long found application in general emulsion and dispersion technology, mainly in adhesives, construction materials or in pharmaceuticals for example, as aqueous coating material for controlled-release products [106]. 

A second generation of phenolic dispersions, patented by J. S. Fry (33). involved the post dispersion of phenolic resins in a mixture of water and water-miscible solvents. To conform with air pollution regulations, the solvent was held to 20 volume %, or less, of the volatiles. A heat-reactive phenolic resin dispersion (34) and a phenolic-epoxy codispersion have become commercially available based on the above technology. Supplied at 40-45% solids, these products, which have a small particle size (0.75-1.0 ym), are better film formers than the earlier dispersions. Used alone or in blends with other waterborne materials, corrosion-resistant baking coatings may be formulated for coil coating primers, dip primers, spray primer-surfacers, and chemically resistant one-coat systems. Products of this type are also tackifiers for acrylic latexes, and such systems have been employed as contact, heat seal, and laminating adhesives for diverse substrates. 

---