Direct Pyrolysis Mass Spectrometry DPMS

Among the several thermal characterisation techniques, the DPMS technique offers several advantages such as the elimination of secondary reactions and condensation 

To investigate the thermal influences of organophosphorus (OP 18) flame retardant on PMMA nanocomposites containing nanoclay (NC) or multi-walled CNTs the DPMS 

Uyar et al. recently demonstrated with the support of DPMS that both the phase structures and the properties of polymer blends can be modified by processing with cyclodextrines (CDs). In fact, thermal stabilities and thermal degradation mechanisms of mixed blends of polycarbonate/PMMA (PC/PMMA), PC/PVAc and PMMA/ 

---

Montaudo and co-workers have used direct pyrolysis mass spectrometry (DPMS) to analyse the high-temperature (>500°C) pyrolysis compounds evolved from several condensation polymers, including poly(bisphenol-A-carbonate) [69], poly(ether sulfone) (PES) and poly(phenylene oxide) (PPO) [72] and poly(phenylene sulfide) (PPS) [73]. Additionally, in order to obtain data on the involatile charred residue formed during the isothermal pyrolysis process, the pyrolysis residue was subjected to aminolysis, and then the aminolyzed residue analysed using fast atom bombardment (FAB) MS. During the DPMS measurements, EI-MS scans were made every 3 s continuously over the mass range 10-1,000 Da with an interscan time of 3 s. 

Direct insertion probe pyrolysis mass spectrometry (DPMS) utilises a device for introducing a single sample of a solid or liquid, usually contained in a quartz or other non-reactive sample holder, into a mass spectrometer ion source. A direct insertion probe consists of a shaft having a sample holder at one end [70] the probe is inserted through a vacuum lock to place the sample holder near to the ion source of the mass spectrometer. The sample is vaporized by heat from the ion source or by heat from a separate heater that surrounds the sample holder. Sample molecules are evaporated into the ion source where they are then ionized as gas-phase molecules. In a recent study, Uyar et al. [74] used such a device for studying the thermal stability of coalesced polymers of polycarbonate, PMMA and polylvinyl acetate) (PVAc) [75] and their binary and ternary blends [74] obtained from their preparation as inclusion compounds in cyclodextrins. 

---