Dip generalities

In dipping generally, but particularly with the anode process, it is desirable to use tanks that circulate the coagulant and latex compound, particularly the latter. Use of circulation keeps the Hquid surface clean and free from lumps, scum, or bubbles. Mechanical circulation can cause mbber particle instabihty, however, and eventually coagulate the compound. Therefore, tanks should be designed to minimize friction or shear action, and the compound stabilized to maintain mechanical stabiUty. 

Veterinary medication, sprays and dips. Generally speaking, routine prophylactic treatments are not allowed but animals can be treated with the appropriate veterinary medicines when ill or injured. Withdrawal periods are longer than the statutory ones, and more appropriate management of the stock, such as reduction of the stocking rate, might be necessary to limit dependence on medicine. In the UK, at least, organophosphate dips and treatments are not permitted under any circumstances. 

The general list of factors influencing the uncertainty in the gross rock volume included the shape of structure, dip of flanks, position of bounding faults, position of internal faults, and depth of fluid contacts (in this case the OWC). In the above example, the owe is penetrated by two wells, and the dip of the structure can be determined from the measurements made in the wells which in turn will allow calibration of fhe 3D seismic. 

Oral adrninistration of vacciaes may be ineffective as many vacciaes are deactivated in the digestive tract of the animals the vacciaes are intended to protect. Dip treatment by which the vacciaes enter the animals through diffusion from the water are not generally as effective as injection but can be used to vaccinate large numbers of animals in short periods of time. 

Laminates. Laminate manufacture involves the impregnation of a web with a Hquid phenoHc resin in a dip-coating operation. Solvent type, resin concentration, and viscosity determine the degree of fiber penetration. The treated web is dried in an oven and the resin cures, sometimes to the B-stage (semicured). Final resin content is between 30 and 70%. The dry sheet is cut and stacked, ready for lamination. In the curing step, multilayers of laminate are stacked or laid up in a press and cured at 150—175°C for several hours. The resins are generally low molecular weight resoles, which have been neutralized with the salt removed. Common carrier solvents for the varnish include acetone, alcohol, and toluene. Alkylated phenols such as cresols improve flexibiUty and moisture resistance in the fused products. 

Phenohc resins are generally used in alcohohc solution, whereas melamine resins are best handled in water or water—alcohol mixtures. The paper or cloth web is passed through a dip tank containing resin solution, adjusted for pick-up on squeeze rohs, and then passed through a heated drying oven. 

The Uniroyal process differs from that of American anode, principally in that the first dip is in the latex compound rather than in the coagulant. The resulting thin mbber film acts as a carrier for a coagulant subsequently absorbed by it. Volatile acids, eg, formic, acetic, or lactic acid, or cyclohexylamine dissolved in alcohol or acetone or both, have generally been used in this process, but in the 1990s water is more commonly used than ethanol. 

Dipped Goods. Gloves with and without cloth support are a typical example. Unsupported appUcations involve specialty medical gloves and weather balloons. Eor CR to compete with less expensive natural mbber, it must provide added value. Natural mbber medical examination gloves contain proteins that can cause an allergic reaction in both patients and medical personnel. Polychloroprene gloves avoid the problem for those individuals, but are too expensive for general use. Natural mbber weather balloons have less lift than CR balloons and are rapidly attacked by ozone in the upper atmosphere. 

---