Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Heterocycles dimerization

Dimeric heterocyclic compounds 206 (R, R = Ph, Ph Ph, MeO MeO MeO) were prepared by treatment of diazo-4//-thiopyrans 203a, 203b, and 203e with 2,4,6-triphenylthiopyrylium salt 48e in an Et3N-CHCl3 solution at 20°C. A mechanism is discussed in detail (85T811). [Pg.222]

An example of thione coordination is demonstrated with the thiocarbonyl donor ligand 2,6-dimethyl-4H-pyran-4-thione, that gives a complex with zinc chloride of the form ZnL2Cl2-The crystal structure shows the zinc is tetrahedrally coordinated by two chloride and two sulfur donors and the compound was further studied by 3H NMR and IR spectroscopy.573 Both monomeric and dimeric heterocyclic thione complexes have been formed with zinc.5 4,575... [Pg.1197]

Treatment of 2-thiouracil with diiodo- or dibromomethane in the presence of sodium hydride in DMF gave the dimeric heterocycle 195 as a main product together with small amounts of the 1,3-thiazetidine derivative 196 and the trimeric heterocycle 197 (Equation 20 Table 15) <1996CL1099>. [Pg.761]

Leet JE, Elango V, Hussain SF, Shamma M (1983) Chenabine and Jhelumine secobisbenzyl-isoquinolines or simple isoquinoline-benzylisoquinoline dimers Heterocycles 20 425-429... [Pg.101]

Pd-cataly2ed reactions of butadiene are different from those catalyzed by other transition metal complexes. Unlike Ni(0) catalysts, neither the well known cyclodimerization nor cyclotrimerization to form COD or CDT[1,2] takes place with Pd(0) catalysts. Pd(0) complexes catalyze two important reactions of conjugated dienes[3,4]. The first type is linear dimerization. The most characteristic and useful reaction of butadiene catalyzed by Pd(0) is dimerization with incorporation of nucleophiles. The bis-rr-allylpalladium complex 3 is believed to be an intermediate of 1,3,7-octatriene (7j and telomers 5 and 6[5,6]. The complex 3 is the resonance form of 2,5-divinylpalladacyclopentane (1) and pallada-3,7-cyclononadiene (2) formed by the oxidative cyclization of butadiene. The second reaction characteristic of Pd is the co-cyclization of butadiene with C = 0 bonds of aldehydes[7-9] and CO jlO] and C = N bonds of Schiff bases[ll] and isocyanate[12] to form the six-membered heterocyclic compounds 9 with two vinyl groups. The cyclization is explained by the insertion of these unsaturated bonds into the complex 1 to generate 8 and its reductive elimination to give 9. [Pg.423]

Many monomeric heterocyclic anhydrobases can be isolated now using specific methods (44), but application of these methods to thiazole ring did not succeed however, appropriate conditions lead to the separation of a dimer, the structure of which has been established by its NMR Spectra and chemical reactivity (26). The most probable mechanism of its formation appears identical with the one previously described in the benzothiazolium series (24). A second molecule of quaternary salt A3... [Pg.37]

Addition compounds form with those organics that contain a donor atom, eg, ketonic oxygen, nitrogen, and sulfur. Thus, adducts form with amides, amines, and A/-heterocycles, as well as acid chlorides and ethers. Addition compounds also form with a number of inorganic compounds, eg, POCl (6,120). In many cases, the addition compounds are dimeric, eg, with ethyl acetate, in titanium tetrachloride-rich systems. By using ammonia, a series of amidodichlorides, Ti(NH2) Cl4, is formed (133). [Pg.131]

Unusual heterocyclic systems can be obtained by photodimerizations and for five-membered heterocycles with two or more heteroatoms such dimerizations need be effected on their ring-fused derivatives. Cyclobutanes are usually obtained as in the photodimerization of the s-triazolo[4,3-a]pyridine (540) to the head-to-head dimer (541). These thermally labile photodimers were formed by dimerization of the 5,6-double bond in one molecule with the 7,8-double bond in another (77T1247). Irradiation of the bis( 1,2,4-triazolo[4,3-a]pyridyl)ethane (542) at 300 nm gave the CK0ifused cyclobutane dimer (543). At 254 nm the cage-like structure (544) was formed (77T1253). [Pg.162]

A zwitterionic, heterocyclic intermediate was found in the dimerization of propanethial 5-oxide (80JA2490). [Pg.38]

This procedure is representative of a new general method for the preparation of noncyclic acyloins by thiazol ium-catalyzed dimerization of aldehydes in the presence of weak bases (Table I). The advantages of this method over the classical reductive coupling of esters or the modern variation in which the intermediate enediolate is trapped by silylation, are the simplicity of the procedure, the inexpensive materials used, and the purity of the products obtained. For volatile aldehydes such as acetaldehyde and propionaldehyde the reaction Is conducted without solvent in a small, heated autoclave. With the exception of furoin the preparation of benzoins from aromatic aldehydes is best carried out with a different thiazolium catalyst bearing an N-methyl or N-ethyl substituent, instead of the N-benzyl group. Benzoins have usually been prepared by cyanide-catalyzed condensation of aromatic and heterocyclic aldehydes.Unsymnetrical acyloins may be obtained by thiazol1um-catalyzed cross-condensation of two different aldehydes. -1 The thiazolium ion-catalyzed cyclization of 1,5-dialdehydes to cyclic acyloins has been reported. [Pg.173]

EPR studies of S-N radicals were reviewed in 1990. Many radicals containing the S-N linkage are persistent for more than several hours in solution at room temperature. Perhaps the best known example is the nitrosodisulfonate dianion [0N(S03)] , named as Fremy s salt. In the solid state this radical dianion dimerizes through weak N 0 interactions, but it forms a paramagnetic blue-violet monomer in solution. Although most chalcogen-nitrogen radicals dimerize in the solid state, a few heterocyclic C-S-N systems can be isolated as monomers (Section 11.3). [Pg.37]

L = C3H3, C H ) and then [Rh(acac)(CO),] to yield the tetranuclear species 180 (85ICA(i00)L5), where the heterocyclic ligands are tridentate. The product reacts with the rhodium(I) dimer [Rh(CO)2Cl]3 to give the trinuclear complex 181. In the solid state, the molecules of this complex form the intermolecular stacks along the z-axis. [Pg.162]

Unusual reactions occur between diazomethane and heterocyclic thiocarbonyl compounds. For example, pyran-4-thiones give methylene ethers of 1,2-dimercaptans formed by dimerization (cf. 115 —>116). 4-Thioflavones and 4-thiochromones react similarly. [Pg.285]

Attempts to prepare macrocyclic structures from a mixture of compounds 10 and 11 failed and only tetrameric (8) and dimeric (12) structures with a six-membered C2N2B2 heterocycle can be isolated (Fig. 3) [23]. [Pg.7]

The 2 1 reaction of 9-BBN with a series of dicarboxylic acids, namely oxalic acid, malonic acid, 2,2-dimethylmalonic acid, and succinic acid, in dimeth-oxyethane gives in some cases dimeric and in other cases macrocyclic (acyloxy)diorganoboranes. This has been proved by IR spectroscopy (all C = O groups are bidentate), B-NMR 5 = 10 ppm) and X-ray crystallography [47]. With oxalic acid two structures are possible (IV and V), of which the first with a five-membered boron heterocycle instead of a four-membered one is the more probable formulation (Fig. 13). [Pg.14]

The solid state structure of 33 reveals a dimeric molecule with an eight-membered B2C2N2O2 heterocyclic ring in a chair conformation. The N—B and B—O bond lengths of 1.585(2) and 1.541(2) A, respectively, as well as the C—N and C—O bond lengths of 1.294(3) and 1.285(3) A, respectively, indicate delocalization of the Ti-electron density in the acylamino moiety [65]. [Pg.16]

While 1,2- and 1,3-alkanediols form only monomeric 1,3,2-dioxaborolanes and 1,3,2-dioxaborinanes with triethylborane, 1,4- and 1,5-alkanediols give mainly dimeric macrocyclic boronates 41 and 42, which are obtained in yields of 70-75% after purification by vacuum distillation. As lateral products oligo-and polymeric molecules are formed. The main products have a 14- and 16-membered heterocyclic ring, respectively (Fig. 15) [84]. [Pg.17]

A review on fliran and its derivatives in the synthesis of other heterocycles was published <95CHE1034>. Furan decomposes on Pd(lll) at 300 K to form H, CO and CjH, which can dimerize to benzene at 350 K <96JA907>. Again, a considerable number of Diels-Alder reactions with furan and fiiran derivatives was reported. The synthesis of 2-pyridinyl-7-oxabicyclo[2.2.1]heptanes (e.g., 3, 4) was accomphshed via zinc chloride-mediated Diels-Alder reaction of furan with 2-vinylpyridines <96SL703>. [Pg.118]


See other pages where Heterocycles dimerization is mentioned: [Pg.305]    [Pg.40]    [Pg.399]    [Pg.41]    [Pg.67]    [Pg.91]    [Pg.713]    [Pg.7]    [Pg.62]    [Pg.167]    [Pg.219]    [Pg.226]    [Pg.87]    [Pg.209]    [Pg.572]    [Pg.784]    [Pg.28]    [Pg.142]    [Pg.40]    [Pg.234]    [Pg.213]    [Pg.884]    [Pg.27]    [Pg.219]    [Pg.91]    [Pg.19]    [Pg.19]    [Pg.119]    [Pg.136]    [Pg.146]    [Pg.207]   
See also in sourсe #XX -- [ Pg.45 ]




SEARCH



Dimeric heterocyclic ligands

Dimers heterocyclic cores

Heterocyclic dimers

Heterocyclic dimers

© 2024 chempedia.info