Devices interfaces, OLED

Due to the relatively high mobility of holes compared with the mobility of electrons in organic materials, holes are often the major charge carriers in OLED devices. To better balance holes and electrons, one approach is to use low WF metals, such as Ca or Ba, protected by a stable metal, such as Al or Ag, overcoated to increase the electron injection efficiency. The problem with such an approach is that the long-term stability of the device is poor due to its tendency to create detrimental quenching sites at areas near the EML-cathode interface. Another approach is to lower the electron injection barrier by introducing a cathode interfacial material (CIM) layer between the cathode material and the organic layer. The optimized thickness of the CIM layer is usually about 0.3-1.0 nm. The function of the CIM is to lower... 

Ultimately, the encapsulated chromophore must be interfaced with hole- and electron-transporting elements to afford an actual OLED device. In this context, a dendrimer is ideally suited since it not only provides steric protection (site... 

Enhancement in the performance of OLEDs can be achieved by balanced charge injection and charge transport. The charge transport is related to the drift mobility of charge carriers. Liu et al. [166] reported blue emission from OLED based on mixed host structure. A mixed host structure consists of two different hosts NPB and 9,10-bis(2 -naphthyl)anthracene (BNA) and one dopant 4,4 -bis(2,2-diphenylvinyl)-l,l -biphenyl (ethylhexyloxy)-l,4-phenylene vinylene (DPVBi) material. They reported significant improvement in device lifetime compared to single host OLEDs. The improvement in the lifetime was attributed to the elimination of heterojunction interface and prevention to formation of fluorescence quenchers. Luminance of 80,370 cd/m2 at 10 V and luminous efficiency of 1.8 cd/A were reported. 

---