Danner process

FIG. 1.2. Tube drawing by machine. Tlie Danner Process. The molten glass from the continuous furnace flows on to the hollow rotating mandrel and is drawn off as a Uibe. 

Danner process A mechanical process for continuous drawing material, such as glass cane or tubing, from a rotating mandrel. 

D. P. Danner and T. E. Daubert, Manualfor Prediction Chemical Process Design Data, AIChE, New York, (extant 1987). 

P. A. Gupte, M. Nagvekar, R. P. Danner, and T. E. Daubert, Documentation of the Basis for Selection of the Contents of Chapters Phase Equilibrium in Manualfor Predicting Chemical Process Design Data, Design Institute for Physical Property Data (AIChE), (1987). 

Flash points, lower and upper flammability limits, and autoignition temperatures are the three properties used to indicate safe operating limits of temperature when processing organic materials. Prediction methods are somewhat erratic, but, together with comparisons with reliable experimental values for families or similar compounds, they are valuable in setting a conservative value for each of the properties. The DIPPR compilation includes evaluated values for over 1000 common organics. Detailed examples of most of the methods discussed are available in Danner and Daubert."... 

Kabadi, V. N., Danner, R. P. (1979) Nomograph solves for solubilities of hydrocarbons in water. Hydrocarbon Processing, 68, 245-246. 

Madzingaidzo, L., Danner, H., and Braun, R. 2002. Process development and optimisation of lactic acid purification using electrodialysis. J. Biotechnol. 96, 22-239. 

From Kelley, U.S. Bur. Mines Bull. 371,1934. For a revision see Kelley, U.S. Bur. Mines Bull. 477,1948. Data for many elements and compounds are given by Johnson (ed.), WADD-TB-60-56,1960, for cryogenic temperatures. Tabulated data for gases can be obtained from many of the references cited in the Thermodynamic Properties subsection and other tables in this section. Thinh, Duran, et al., Hydrocarbon Process., 50, 98 (January 1971), review previous equation fits and give newer fits for 408 hydrocarbons and related compounds. Later publications include Duran, Thinh, et si.. Hydrocarbon Process., 55,153 (August 1976) Thompson,/. Chcm. Eng. Data, 22(4), 431 (1977) and Passut and Danner, Ind. Eng. Chcm. Process Des. Dev., 11,543 (1972) 13,193 (1974). 

Danner, R.P., and T.E. Daubert, eds.. Manual for Predicting Chemical Process Design Data, American Institute of Chemical Engineers, New York (1984). 

---