Diazo compounds cyclopropanations

The majority of preparative methods which have been used for obtaining cyclopropane derivatives involve carbene addition to an olefmic bond, if acetylenes are used in the reaction, cyclopropenes are obtained. Heteroatom-substituted or vinyl cydopropanes come from alkenyl bromides or enol acetates (A. de Meijere, 1979 E. J. Corey, 1975 B E. Wenkert, 1970 A). The carbenes needed for cyclopropane syntheses can be obtained in situ by a-elimination of hydrogen halides with strong bases (R. Kdstcr, 1971 E.J. Corey, 1975 B), by copper catalyzed decomposition of diazo compounds (E. Wenkert, 1970 A S.D. Burke, 1979 N.J. Turro, 1966), or by reductive elimination of iodine from gem-diiodides (J. Nishimura, 1969 D. Wen-disch, 1971 J.M. Denis, 1972 H.E. Simmons, 1973 C. Girard, 1974),... 

Whereas the utility of these methods has been amply documented, they are limited in the structures they can provide because of their dependence on the diazoacetate functionality and its unique chemical properties. Transfer of a simple, unsubstituted methylene would allow access to a more general subset of chiral cyclopropanes. However, attempts to utilize simple diazo compounds, such as diazomethane, have never approached the high selectivities observed with the related diazoacetates (Scheme 3.2) [4]. Traditional strategies involving rhodium [3a,c], copper [ 3b, 5] and palladium have yet to provide a solution to this synthetic problem. The most promising results to date involve the use of zinc carbenoids albeit with selectivities less than those obtained using the diazoacetates. 

The starting diazo esters 110 were prepared by diazo transfer from the corresponding malonate esters 109. A selection of chiral Hgands in conjunction with 2mol% (with respect to the diazo compound) of [Cu(OTf)2] in (CH2C1)2 was then examined at 65 °C (Scheme 31). All of the Hgands tested were sufficiently reactive to produce diazo decomposition at 65 °C, although the yields of cyclopropanation products were quite variable. Even tertiary... 

Muller et al. have also examined the enantioselectivity and the stereochemical course of copper-catalyzed intramolecular CH insertions of phenyl-iodonium ylides [34]. The decomposition of diazo compounds in the presence of transition metals leads to typical reactions for metal-carbenoid intermediates, such as cyclopropanations, insertions into X - H bonds, and formation of ylides with heteroatoms that have available lone pairs. Since diazo compounds are potentially explosive, toxic, and carcinogenic, the number of industrial applications is limited. Phenyliodonium ylides are potential substitutes for diazo compounds in metal-carbenoid reactions. Their photochemical, thermal, and transition-metal-catalyzed decompositions exhibit some similarities to those of diazo compounds. 

Scheme 6.1 Catalytic cycle of metal-catalysed carbenoid cyclopropanation reactions with diazo compounds.

Since their first introduction by Brunner and McKervey as chiral catalysts for the asymmetric cyclopropanation of alkenes with diazo compounds, chiral dirhodium tetra(A-arylsulfonylprolinates) complexes have been widely used by Davies,in particular, in the context of these reactions. Therefore, the use of... 

DCA reactions are an important means of synthesis of a wide variety of heterocyclic molecules, some of which are useful intermediates in multistage syntheses. Pyrazolines, which are formed from alkenes and diazo compounds, for example, can be pyrolyzed or photolyzed to give cyclopropanes. 

These results can be interpreted in terms of competition between recombination of the diradical intermediate and conformational equilibration, which would destroy the stereochemical relationships present in the azo compound. The main synthetic application of azo compound decomposition is in the synthesis of cyclopropanes and other strained-ring systems. Some of the required azo compounds can be made by 1,3-dipolar cycloadditions of diazo compounds (see Section 6.2). 

Metal-Catalyzed. Cyclopropanation. Carbene addition reactions can be catalyzed by several transition metal complexes. Most of the synthetic work has been done using copper or rhodium complexes and we focus on these. The copper-catalyzed decomposition of diazo compounds is a useful reaction for formation of substituted cyclopropanes.188 The reaction has been carried out with several copper salts,189 and both Cu(I) and Cu(II) triflate are useful.190 Several Cu(II)salen complexes, such as the (V-f-butyl derivative, which is called Cu(TBS)2, have become popular catalysts.191... 

The Davies group has described several examples of a rhodium-catalyzed decomposition of a diazo-compound followed by a [2+1] cycloaddition to give divinyl cyclopropanes, which then can undergo a Cope rearrangement. Reaction of the pyrrol derivative 6/2-51 and the diazo compound 6/2-52 led to the tropane nucleus 6/2-54 via the cyclopropane derivative 6/2-53 (Scheme 6/2.11) [201]. Using (S)-lactate and (R)-pari lolaclorie as chiral auxiliaries at the diazo compound, a diastereoselectivity of around 90 10 could be achieved in both cases. 

The same difference in regioselectivity holds for cyclopropanation with ethyl diazoacetate 25 K It is assumed that Cu(OTf)2 or Cu(BF4)2 are reduced to the Cu(I) salts by the diazo compound the ability of CuOTf to form stable complexes with olefins may then explain why, with these catalysts, cyclopropanation is governed by the steric environment around a double bond rather than by its electron-richness. 

The common by-products obtained in the transition-metal catalyzed reactions are the formal carbene dimers, diethyl maleate and diethyl fumarate. In accordance with the assumption that they owe their formation to the competition of olefin and excess diazo ester for an intermediate metal carbene, they can be widely suppressed by keeping the actual concentration of diazo compound as low as possible. Usually, one attempts to verify this condition by slow addition of the diazo compound to an excess (usually five- to tenfold) of olefin. This means that the addition rate will be crucial for the yields of cyclopropanes and carbene dimers. For example, Rh6(CO)16-catalyzed cyclopropanation of -butyl vinyl ether with ethyl diazoacetate proceeds in 69% yield when EDA is added during 30 minutes, but it increases to 87 % for a 6 h period. For styrene, the same differences were observed 65). 

For many catalytic cyclopropanations, the stereoselectivity describing the stereochemical relation between substituents at the carbenoid and those at the double bond is not very pronounced. EjZ or syn/anti ratios of ca. 1-3 in favor of the less congested isomer may be considered normal (for examples see Tables 6 and 7). The stereochemical outcome can be expected to be governed by the nature of the olefin, the diazo compound and the catalyst. 

As it is known from experience that the metal carbenes operating in most catalyzed reactions of diazo compounds are electrophilic species, it comes as no surprise that only a few examples of efficient catalyzed cyclopropanation of electron-poor alkeiies exist. One of those examples is the copper-catalyzed cyclopropanation of methyl vinyl ketone with ethyl diazoacetate 140), contrasting with the 2-pyrazoline formation in the purely thermal reaction (for failures to obtain cyclopropanes by copper-catalyzed decomposition of diazoesters, see Table VIII in Ref. 6). 

Enantioselective carbenoid cyclopropanation can be expected to occur when either an olefin bearing a chiral substituent, or such a diazo compound or a chiral catalyst is present. Only the latter alternative has been widely applied in practice. All efficient chiral catalysts which are known at present are copper or cobalt(II) chelates, whereas palladium complexes 86) proved to be uneflective. The carbenoid reactions between alkyl diazoacetates and styrene or 1,1 -diphenylethylene (Scheme 27) are usually chosen to test the efficiency of a chiral catalyst. As will be seen in the following, the extent to which optical induction is brought about by enantioselection either at a prochiral olefin or at a prochiral carbenoid center, varies widely with the chiral catalyst used. 

It has already been mentioned that prochirality of the olefin is not necessary for successful enantioselective cyclopropanation with an alkyl diazoacetate in the presence of catalysts 207. What happens if a prochiral olefin and a non-prochiral diazo compound are combined Only one result provides an answer to date The cyclopropane derived from styrene and dicyanodiazomethane shows only very low optical induction (4.6 % e.e. of the (25) enantiomer, catalyst 207a) 9S). Thus, it can be concluded that with the cobalt chelate catalysts 207, enantioface selectivity at the olefin is generally unimportant and that a prochiral diazo compound is needed for efficient optical induction. As the results with chiral copper 1,3-diketonates 205 and 2-diazodi-medone show, such a statement can not be generalized, of course. 

Aziridines have been synthesized, albeit in low yield, by copper-catalyzed decomposition of ethyl diazoacetate in the presence of an inline 260). It seems that such a carbenoid cyclopropanation reaction has not been realized with other diazo compounds. The recently described preparation of 1,2,3-trisubstituted aziridines by reaction of phenyldiazomethane with N-alkyl aldimines or ketimines in the presence of zinc iodide 261 > most certainly does not proceed through carbenoid intermediates rather, the metal salt serves to activate the imine to nucleophilic attack from the diazo carbon. Replacement of Znl2 by one of the traditional copper catalysts resulted in formation of imidazoline derivatives via an intermediate azomethine ylide261). 

Another remarkable property of iodorhodium(III) porphyrins is their ability to decompose excess diazo compound, thereby initiating carbene transfer reactions 398). This observation led to the use of iodorhodium(III) me.vo-tetraarylporphyrins as cyclopropanation catalysts with enhanced syn anti selectivity (see Sect. 2.2.3) s7, i°o) as wep as catalysts for carbenoid insertion into aliphatic C—H bonds, whereby an unusually high affinity for primary C—H bonds was achieved (see Sect. 6.1)287). These selectivities, unapproached by any other transition metal catalyst,... 

The Lewis acid-Lewis base interaction outlined in Scheme 43 also explains the formation of alkylrhodium complexes 414 from iodorhodium(III) meso-tetraphenyl-porphyrin 409 and various diazo compounds (Scheme 42)398), It seems reasonable to assume that intermediates 418 or 419 (corresponding to 415 and 417 in Scheme 43) are trapped by an added nucleophile in the reaction with ethyl diazoacetate, and that similar intermediates, by proton loss, give rise to vinylrhodium complexes from ethyl 2-diazopropionate or dimethyl diazosuccinate. As the rhodium porphyrin 409 is also an efficient catalyst for cyclopropanation of olefins with ethyl diazoacetate 87,1°°), stj bene formation from aryl diazomethanes 358 and carbene insertion into aliphatic C—H bonds 287, intermediates 418 or 419 are likely to be part of the mechanistic scheme of these reactions, too. 

In 1966, Nozaki et al. reported that the decomposition of o-diazo-esters by a copper chiral Schiff base complex in the presence of olefins gave optically active cyclopropanes (Scheme 58).220 221 Following this seminal discovery, Aratani et al. commenced an extensive study of the chiral salicylaldimine ligand and developed highly enantioselective and industrially useful cyclopropanation.222-224 Since then, various complexes have been prepared and applied to asymmetric cyclo-propanation. In this section, however, only selected examples of cyclopropanations using diazo compounds are discussed. For a more detailed discussion of asymmetric cyclopropanation and related reactions, see reviews and books.17-21,225... 

In 1986, Pfaltz et al. introduced a new type of pseudo C2-symmetrical copper-semicorrin complex (68) as the catalyst (Scheme 60).227 228 The complexes (68) are reduced in situ by the diazo compound or by pretreatment with phenylhydrazine to give monomeric Cu1 species (69), which catalyze cyclopropanation. Of the semicorrin complexes, complex (68a) (R = CMe2OH) showed the best enantioselectivity in the cyclopropanation of terminal and 1,2-disubstituted olefins.227,228,17 It is noteworthy that complex (68a) catalyzes cyclopropanation, using diazomethane as a carbene source, with good enantioselectivity (70-75% ee).17... 

---